From: Tomas Henzl <thenzl@redhat.com>
To: "Matthew R. Ochs" <mrochs@linux.vnet.ibm.com>,
linux-scsi@vger.kernel.org,
James.Bottomley@HansenPartnership.com, nab@linux-iscsi.org,
brking@linux.vnet.ibm.com, imunsie@au1.ibm.com,
dja@ozlabs.au.ibm.com, andrew.donnellan@au1.ibm.com
Cc: mikey@neuling.org, linuxppc-dev@lists.ozlabs.org,
"Manoj N. Kumar" <manoj@linux.vnet.ibm.com>
Subject: Re: [PATCH v2 09/30] cxlflash: Fix to stop interrupt processing on remove
Date: Thu, 17 Sep 2015 14:38:19 +0200 [thread overview]
Message-ID: <55FAB43B.8050306@redhat.com> (raw)
In-Reply-To: <1442422399-41262-1-git-send-email-mrochs@linux.vnet.ibm.com>
On 16.9.2015 18:53, Matthew R. Ochs wrote:
> Interrupt processing can run in parallel to a remove operation. This
> can lead to a condition where the interrupt handler is processing with
> memory that has been freed.
>
> To avoid processing an interrupt while memory may be yanked, check for
> removal while in the interrupt handler. Bail when removal is imminent.
>
> Signed-off-by: Matthew R. Ochs <mrochs@linux.vnet.ibm.com>
> Signed-off-by: Manoj N. Kumar <manoj@linux.vnet.ibm.com>
> ---
> drivers/scsi/cxlflash/common.h | 2 ++
> drivers/scsi/cxlflash/main.c | 21 +++++++++++++++------
> 2 files changed, 17 insertions(+), 6 deletions(-)
>
> diff --git a/drivers/scsi/cxlflash/common.h b/drivers/scsi/cxlflash/common.h
> index 1abe4e0..03d2cc6 100644
> --- a/drivers/scsi/cxlflash/common.h
> +++ b/drivers/scsi/cxlflash/common.h
> @@ -103,6 +103,8 @@ struct cxlflash_cfg {
> enum cxlflash_lr_state lr_state;
> int lr_port;
>
> + atomic_t remove_active;
> +
> struct cxl_afu *cxl_afu;
>
> struct pci_pool *cxlflash_cmd_pool;
> diff --git a/drivers/scsi/cxlflash/main.c b/drivers/scsi/cxlflash/main.c
> index 6e85c77..89ee648 100644
> --- a/drivers/scsi/cxlflash/main.c
> +++ b/drivers/scsi/cxlflash/main.c
> @@ -892,6 +892,7 @@ static void cxlflash_remove(struct pci_dev *pdev)
> spin_unlock_irqrestore(&cfg->tmf_waitq.lock, lock_flags);
>
> cfg->state = STATE_FAILTERM;
> + atomic_inc(&cfg->remove_active);
Hi Matthew,
you could just call term_afu at this point, this way you don't
need an additional check in all irq functions.
Cheers,
Tomas
> cxlflash_stop_term_user_contexts(cfg);
>
> switch (cfg->init_state) {
> @@ -1380,16 +1381,20 @@ static void afu_err_intr_init(struct afu *afu)
> static irqreturn_t cxlflash_sync_err_irq(int irq, void *data)
> {
> struct afu *afu = (struct afu *)data;
> + struct cxlflash_cfg *cfg = afu->parent;
> u64 reg;
> u64 reg_unmasked;
>
> + if (atomic_read(&cfg->remove_active))
> + goto out;
> +
> reg = readq_be(&afu->host_map->intr_status);
> reg_unmasked = (reg & SISL_ISTATUS_UNMASK);
>
> if (reg_unmasked == 0UL) {
> pr_err("%s: %llX: spurious interrupt, intr_status %016llX\n",
> __func__, (u64)afu, reg);
> - goto cxlflash_sync_err_irq_exit;
> + goto out;
> }
>
> pr_err("%s: %llX: unexpected interrupt, intr_status %016llX\n",
> @@ -1397,7 +1402,7 @@ static irqreturn_t cxlflash_sync_err_irq(int irq, void *data)
>
> writeq_be(reg_unmasked, &afu->host_map->intr_clear);
>
> -cxlflash_sync_err_irq_exit:
> +out:
> pr_debug("%s: returning rc=%d\n", __func__, IRQ_HANDLED);
> return IRQ_HANDLED;
> }
> @@ -1412,6 +1417,7 @@ cxlflash_sync_err_irq_exit:
> static irqreturn_t cxlflash_rrq_irq(int irq, void *data)
> {
> struct afu *afu = (struct afu *)data;
> + struct cxlflash_cfg *cfg = afu->parent;
> struct afu_cmd *cmd;
> bool toggle = afu->toggle;
> u64 entry,
> @@ -1421,8 +1427,10 @@ static irqreturn_t cxlflash_rrq_irq(int irq, void *data)
>
> /* Process however many RRQ entries that are ready */
> while (true) {
> - entry = *hrrq_curr;
> + if (atomic_read(&cfg->remove_active))
> + goto out;
>
> + entry = *hrrq_curr;
> if ((entry & SISL_RESP_HANDLE_T_BIT) != toggle)
> break;
>
> @@ -1440,7 +1448,7 @@ static irqreturn_t cxlflash_rrq_irq(int irq, void *data)
>
> afu->hrrq_curr = hrrq_curr;
> afu->toggle = toggle;
> -
> +out:
> return IRQ_HANDLED;
> }
>
> @@ -1454,7 +1462,7 @@ static irqreturn_t cxlflash_rrq_irq(int irq, void *data)
> static irqreturn_t cxlflash_async_err_irq(int irq, void *data)
> {
> struct afu *afu = (struct afu *)data;
> - struct cxlflash_cfg *cfg;
> + struct cxlflash_cfg *cfg = afu->parent;
> u64 reg_unmasked;
> const struct asyc_intr_info *info;
> struct sisl_global_map *global = &afu->afu_map->global;
> @@ -1462,7 +1470,8 @@ static irqreturn_t cxlflash_async_err_irq(int irq, void *data)
> u8 port;
> int i;
>
> - cfg = afu->parent;
> + if (atomic_read(&cfg->remove_active))
> + goto out;
>
> reg = readq_be(&global->regs.aintr_status);
> reg_unmasked = (reg & SISL_ASTATUS_UNMASK);
next prev parent reply other threads:[~2015-09-17 12:38 UTC|newest]
Thread overview: 10+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-09-16 16:53 [PATCH v2 09/30] cxlflash: Fix to stop interrupt processing on remove Matthew R. Ochs
2015-09-17 12:38 ` Tomas Henzl [this message]
2015-09-17 17:16 ` Matthew R. Ochs
2015-09-18 11:59 ` Tomas Henzl
2015-09-18 23:26 ` Matthew R. Ochs
2015-09-21 11:33 ` Tomas Henzl
2015-09-21 21:58 ` Matthew R. Ochs
-- strict thread matches above, loose matches on Subject: below --
2015-09-16 21:23 [PATCH v2 00/30] cxlflash: Miscellaneous bug fixes and corrections Matthew R. Ochs
2015-09-16 21:28 ` [PATCH v2 09/30] cxlflash: Fix to stop interrupt processing on remove Matthew R. Ochs
2015-09-17 11:58 ` David Laight
2015-09-17 16:55 ` Matthew R. Ochs
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=55FAB43B.8050306@redhat.com \
--to=thenzl@redhat.com \
--cc=James.Bottomley@HansenPartnership.com \
--cc=andrew.donnellan@au1.ibm.com \
--cc=brking@linux.vnet.ibm.com \
--cc=dja@ozlabs.au.ibm.com \
--cc=imunsie@au1.ibm.com \
--cc=linux-scsi@vger.kernel.org \
--cc=linuxppc-dev@lists.ozlabs.org \
--cc=manoj@linux.vnet.ibm.com \
--cc=mikey@neuling.org \
--cc=mrochs@linux.vnet.ibm.com \
--cc=nab@linux-iscsi.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).