Re: kernel BUG at drivers/scsi/scsi_lib.c:1096!

[Hannes Reinecke <hare@suse.de>]

On 11/25/2015 06:56 PM, Jens Axboe wrote:
> On 11/25/2015 02:04 AM, Hannes Reinecke wrote:
>> On 11/20/2015 04:28 PM, Ewan Milne wrote:
>>> On Fri, 2015-11-20 at 15:55 +0100, Hannes Reinecke wrote:
>>>> Can't we have a joint effort here?
>>>> I've been spending a _LOT_ of time trying to debug things here, but
>>>> none of the ideas I've come up with have been able to fix anything.
>>>
>>> Yes.  I'm not the one primarily looking at it, and we don't have a
>>> reproducer in-house.  We just have the one dump right now.
>>>
>>>>
>>>> I'm almost tempted to increase the count from scsi_alloc_sgtable()
>>>> by one and be done with ...
>>>>
>>>
>>> That might not fix it if it is a problem with the merge code, though.
>>>
>> And indeed, it doesn't.
>> Seems I finally found the culprit.
>>
>> What happens is this:
>> We have two paths, with these seg_boundary_masks:
>>
>> path-1:    seg_boundary_mask = 65535,
>> path-2:    seg_boundary_mask = 4294967295,
>>
>> consequently the DM request queue has this:
>>
>> md-1:    seg_boundary_mask = 65535,
>>
>> What happens now is that a request is being formatted, and sent
>> to path 2. During submission req->nr_phys_segments is formatted
>> with the limits of path 2, arriving at a count of 3.
>> Now the request gets retried on path 1, but as the NOMERGE request
>> flag is set req->nr_phys_segments is never updated.
>> But blk_rq_map_sg() ignores all counters, and just uses the
>> bi_vec directly, resulting in a count of 4 -> boom.
>>
>> So the culprit here is the NOMERGE flag, which is evaluated
>> via
>> ->dm_dispatch_request()
>>    ->blk_insert_cloned_request()
>>      ->blk_rq_check_limits()
>>
>> If the above assessment is correct, the following patch should
>> fix it:
>>
>> diff --git a/block/blk-core.c b/block/blk-core.c
>> index 801ced7..12cccd6 100644
>> --- a/block/blk-core.c
>> +++ b/block/blk-core.c
>> @@ -1928,7 +1928,7 @@ EXPORT_SYMBOL(submit_bio);
>>    */
>>   int blk_rq_check_limits(struct request_queue *q, struct request *rq)
>>   {
>> -       if (!rq_mergeable(rq))
>> +       if (rq->cmd_type != REQ_TYPE_FS)
>>                  return 0;
>>
>>          if (blk_rq_sectors(rq) > blk_queue_get_max_sectors(q,
>> rq->cmd_flags)) {
>>
>>
>> Mike? Jens?
>> Can you comment on it?
>
> We only support merging on REQ_TYPE_FS already, so how is the above
> making it any different? In general, NOMERGE being set or not should not
> make a difference. It's only a hint that we need not check further if we
> should be merging on this request, since we already tried it once, found
> we'd exceed various limits, then set NOMERGE to reflect that.
>
The problem is that NOMERGE does too much, as it inhibits _any_ merging.

Unfortunately, the req->nr_phys_segments value is evaluated in the final
_driver_ context _after_ the merging happend; cf 
scsi_lib.c:scsi_init_sgtable().
As nr_phys_segments is inherited from the original request (and never
recalculated with the new request queue limits) the following 
blk_rq_map_sg() call might end up at a different calculation, especially
after retrying a request on another path.

Cheers,

Hannes
-- 
Dr. Hannes Reinecke		               zSeries & Storage
hare@suse.de			               +49 911 74053 688
SUSE LINUX GmbH, Maxfeldstr. 5, 90409 Nürnberg
GF: F. Imendörffer, J. Smithard, J. Guild, D. Upmanyu, G. Norton
HRB 21284 (AG Nürnberg)