[P.A. Semi] Does the ethernet interface work on your Electra, Chitra, Nemo, and Athena board?

[Christian Zigotzky <chzigotzky@xenosoft.de>]

Hi Denis,

Thank you for your answer. Sorry because of my description.

Yes, the driver probe function finds the device.

With kernel 4.4-rc3:

dmesg | grep -i eth0

[ 2.297473] eth0: PA Semi GMAC: intf 5, hw addr 02:00:e0:0a:30:00

dhclient eth0

RTNETLINK answers: Cannot allocate memory

With kernel 4.1.13:

dmesg | grep -i eth0

[ 2.328115] eth0: PA Semi GMAC: intf 5, hw addr 02:00:e0:0a:30:00
[ 37.130466] eth0: Link is up at 100 Mbps, full duplex.

Cheers,

Christian

On 30 November 2015 at 09:37 AM, Denis Kirjanov wrote:
> On 11/29/15, Christian Zigotzky <chzigotzky@xenosoft.de> wrote:
>> Hi All,
>>
>> Does the ethernet interface on your Electra, Chitra, Nemo, and Athena
>> board work with the release candidates of the kernel 4.4? Unfortunately
>> the P.A. Semi ethernet doesn't work on our Nemo boards with the release
>> candidates of the kernel 4.4. We have set the following entries in the
>> kernel config:
>>
>> CONFIG_NET_VENDOR_PASEMI=y
>> CONFIG_PASEMI_MAC=y
>>
>> Could you please test the P.A. Semi ethernet on your P.A. Semi boards?
> It's not clear from your descriptions what is not working. Does the
> driver probe function find  a device? Does the interface show up in
> the kernel? Can it send/receive packets?
>
> Also please CC netdev.
>
> Thanks.
>
>> Thanks in advance,
>>
>> Christian
>> _______________________________________________
>> Linuxppc-dev mailing list
>> Linuxppc-dev@lists.ozlabs.org
>> https://lists.ozlabs.org/listinfo/linuxppc-dev