From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Received: from fmmailgate04.web.de (fmmailgate04.web.de [217.72.192.242]) by ozlabs.org (Postfix) with ESMTP id 2D050DDDF5 for ; Wed, 30 Jan 2008 21:03:57 +1100 (EST) Received: from web.de by fmmailgate04.web.de (Postfix) with SMTP id 0121E44C9C03 for ; Wed, 30 Jan 2008 11:03:55 +0100 (CET) Date: Wed, 30 Jan 2008 11:03:54 +0100 Message-Id: <568740669@web.de> MIME-Version: 1.0 From: Joachim Meyer To: linuxppc-embedded@ozlabs.org Subject: linux @ xup Content-Type: text/plain; charset=iso-8859-15 List-Id: Linux on Embedded PowerPC Developers Mail List List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Hi I already succeded in setting up a Linux for the ml310. I'm trying to do it for the XUP Board now. The Problem I have is, that in every HowTo I read I should set at the EDK's software settings under Library/OS Parameters: Set PLB_CLOCK_FREQ_HZ to the PLB speed (usually 100000000) But I can't find where to set it. With the ml310 there was this option. I'm using the EDK Board Definition File (.xbd), Pcores & Drivers from Xilinx: http://www.xilinx.com/univ/xupv2p.html EDK Version 9.1 SP2 If I ignore it and build the BSP there comes out an xparameters_ml300.h file which I copy to my Kernel sources. When I try to compile, I get errors that the PLB_CLOCK_FREQ_HZ isn't defined. Can I just add it to the xparameters_ml300.h file file (which I rename "xparameters_xupv2p.h") by Hand? Greez and thx Joachim _________________________________________________________________________ In 5 Schritten zur eigenen Homepage. Jetzt Domain sichern und gestalten! Nur 3,99 EUR/Monat! http://www.maildomain.web.de/?mc=021114