From: Frederic Barrat <fbarrat@linux.vnet.ibm.com>
To: manoj@linux.vnet.ibm.com
Cc: Ian Munsie <imunsie@au1.ibm.com>,
michael.neuling@au1.ibm.com, mpe@ellerman.id.au,
linuxppc-dev@lists.ozlabs.org
Subject: Re: Fwd: [PATCH v4 11/18] cxl: Separate bare-metal fields in adapter and AFU data structures
Date: Mon, 22 Feb 2016 18:57:04 +0100 [thread overview]
Message-ID: <56CB4BF0.2040906@linux.vnet.ibm.com> (raw)
In-Reply-To: <56CA60E8.6090607@linux.vnet.ibm.com>
Manoj,
Point taken. Those constants are all defined in the architecture
document (CAIA). We should probably use more macros there.
However, since those were not introduced by this patch, I'll put it in
my todo list for the future, but don't intend to address it in this
patchset.
Fred
Le 22/02/2016 02:14, Manoj Kumar a écrit :
> Christophe, Fred: Perhaps none of these comments below are specific
> to your patch, but clarification would help the next reviewer.
>
> --
> Manoj Kumar
>
>> Subject: [PATCH v4 11/18] cxl: Separate bare-metal fields in adapter and
>
>>
>> - WARN_ON(afu->spa_size > 0x100000); /* Max size supported by the
>> hardware */
>> + WARN_ON(afu->native->spa_size > 0x100000); /* Max size supported by
>> the hardware */
>
> Would prefer to see a MACRO defined, instead of the literal 0x1000000
>
>
>>
>> cxl_p1_write(adapter, CXL_PSL_ErrIVTE, 0x0000000000000000);
>
> Same as above.
>
>
>> p1n_base = p1_base(dev) + 0x10000 + (afu->slice * p1n_size);
>
> Same as above.
>
>>
>> @@ -621,7 +622,7 @@ static int cxl_read_afu_descriptor(struct cxl_afu
>> *afu)
>> afu->pp_size = AFUD_PPPSA_LEN(val) * 4096;
>
> Both val and pp_size are 64bit quantities. Not clear how the overflow
> during multiplication is going to be handled.
>
>
>> afu->crs_len = AFUD_CR_LEN(val) * 256;
>
> What do the 4096 and 256 represent?
>
>
>> /* Convert everything to bytes, because there is NO WAY I'd look
>> at the
>> * code a month later and forget what units these are in ;-) */
>> - adapter->ps_off = ps_off * 64 * 1024;
>> + adapter->native->ps_off = ps_off * 64 * 1024;
>> adapter->ps_size = ps_size * 64 * 1024;
>> - adapter->afu_desc_off = afu_desc_off * 64 * 1024;
>> - adapter->afu_desc_size = afu_desc_size *64 * 1024;
>> + adapter->native->afu_desc_off = afu_desc_off * 64 * 1024;
>> + adapter->native->afu_desc_size = afu_desc_size * 64 * 1024;
>
> Is this (64k) page size related?
>
>
next prev parent reply other threads:[~2016-02-22 17:57 UTC|newest]
Thread overview: 39+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-02-16 21:38 [PATCH v4 00/18] cxl: Add support for powerVM guest Frederic Barrat
2016-02-16 21:38 ` [PATCH v4 01/18] cxl: Move common code away from bare-metal-specific files Frederic Barrat
[not found] ` <56CA2C74.7050504@linux.vnet.ibm.com>
2016-02-21 21:38 ` Fwd: " Manoj Kumar
2016-02-16 21:38 ` [PATCH v4 02/18] cxl: Move bare-metal specific code to specialized files Frederic Barrat
[not found] ` <56CA2C7C.40803@linux.vnet.ibm.com>
2016-02-21 21:44 ` Fwd: " Manoj Kumar
2016-02-22 18:13 ` Frederic Barrat
2016-02-16 21:38 ` [PATCH v4 03/18] cxl: Define process problem state area at attach time only Frederic Barrat
[not found] ` <56CA2C87.7040905@linux.vnet.ibm.com>
2016-02-21 21:45 ` Fwd: " Manoj Kumar
2016-02-16 21:38 ` [PATCH v4 04/18] cxl: Introduce implementation-specific API Frederic Barrat
[not found] ` <56CA2C8F.4030800@linux.vnet.ibm.com>
2016-02-21 22:00 ` Fwd: " Manoj Kumar
2016-02-16 21:38 ` [PATCH v4 05/18] cxl: Rename some bare-metal specific functions Frederic Barrat
[not found] ` <56CA2C97.8000906@linux.vnet.ibm.com>
2016-02-21 22:02 ` Fwd: " Manoj Kumar
2016-02-16 21:38 ` [PATCH v4 06/18] cxl: Isolate a few bare-metal-specific calls Frederic Barrat
[not found] ` <56CA2C9F.8010903@linux.vnet.ibm.com>
2016-02-21 22:13 ` Fwd: " Manoj Kumar
2016-02-16 21:39 ` [PATCH v4 07/18] cxl: Update cxl_irq() prototype Frederic Barrat
[not found] ` <56CA2CA8.2020402@linux.vnet.ibm.com>
2016-02-21 22:15 ` Fwd: " Manoj Kumar
2016-02-16 21:39 ` [PATCH v4 08/18] cxl: IRQ allocation for guests Frederic Barrat
[not found] ` <56CA2CB1.5030105@linux.vnet.ibm.com>
2016-02-21 22:30 ` Fwd: " Manoj Kumar
2016-02-22 14:46 ` Frederic Barrat
2016-02-22 19:02 ` Manoj Kumar
2016-02-16 21:39 ` [PATCH v4 09/18] cxl: New possible return value from hcall Frederic Barrat
[not found] ` <56CA2CBD.4070907@linux.vnet.ibm.com>
2016-02-21 22:50 ` Fwd: " Manoj Kumar
2016-02-16 21:39 ` [PATCH v4 10/18] cxl: New hcalls to support CAPI adapters Frederic Barrat
[not found] ` <56CA2CC6.9010802@linux.vnet.ibm.com>
2016-02-21 23:22 ` Fwd: " Manoj Kumar
2016-02-22 18:14 ` Frederic Barrat
2016-02-22 19:46 ` Manoj Kumar
2016-02-16 21:39 ` [PATCH v4 11/18] cxl: Separate bare-metal fields in adapter and AFU data structures Frederic Barrat
[not found] ` <56CA2CD1.7020908@linux.vnet.ibm.com>
2016-02-22 1:14 ` Fwd: " Manoj Kumar
2016-02-22 17:57 ` Frederic Barrat [this message]
2016-02-22 18:53 ` Manoj Kumar
2016-02-16 21:39 ` [PATCH v4 12/18] cxl: Add guest-specific code Frederic Barrat
[not found] ` <56CA2CDA.90102@linux.vnet.ibm.com>
2016-02-22 1:29 ` Fwd: " Manoj Kumar
2016-02-22 18:10 ` Frederic Barrat
2016-02-16 21:39 ` [PATCH v4 13/18] cxl: sysfs support for guests Frederic Barrat
2016-02-16 21:39 ` [PATCH v4 14/18] cxl: Support to flash a new image on the adapter from a guest Frederic Barrat
2016-02-16 21:39 ` [PATCH v4 15/18] cxl: Parse device tree and create CAPI device(s) at boot Frederic Barrat
2016-02-16 21:39 ` [PATCH v4 16/18] cxl: Support the cxl kernel API from a guest Frederic Barrat
2016-02-16 21:39 ` [PATCH v4 17/18] cxl: Adapter failure handling Frederic Barrat
2016-02-16 21:39 ` [PATCH v4 18/18] cxl: Add tracepoints around the CAPI hcall Frederic Barrat
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=56CB4BF0.2040906@linux.vnet.ibm.com \
--to=fbarrat@linux.vnet.ibm.com \
--cc=imunsie@au1.ibm.com \
--cc=linuxppc-dev@lists.ozlabs.org \
--cc=manoj@linux.vnet.ibm.com \
--cc=michael.neuling@au1.ibm.com \
--cc=mpe@ellerman.id.au \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).