From: Alexey Kardashevskiy <aik@ozlabs.ru>
To: Gavin Shan <gwshan@linux.vnet.ibm.com>, linuxppc-dev@lists.ozlabs.org
Cc: linux-pci@vger.kernel.org, devicetree@vger.kernel.org,
benh@kernel.crashing.org, mpe@ellerman.id.au, dja@axtens.net,
bhelgaas@google.com, robherring2@gmail.com,
grant.likely@linaro.org
Subject: Re: [PATCH v8 19/45] powerpc/powernv: Use PE instead of number during setup and release
Date: Tue, 19 Apr 2016 12:50:57 +1000 [thread overview]
Message-ID: <57159D11.9050808@ozlabs.ru> (raw)
In-Reply-To: <1455680668-23298-20-git-send-email-gwshan@linux.vnet.ibm.com>
On 02/17/2016 02:44 PM, Gavin Shan wrote:
> In current implementation, the PEs that are allocated or picked
> from the reserved list are identified by PE number. The PE instance
> has to be picked according to the PE number eventually. We have
> same issue when PE is released.
>
> For pnv_ioda_pick_m64_pe() and pnv_ioda_alloc_pe(), this returns
> PE instance so that pnv_ioda_setup_bus_PE() can use the allocated
> or reserved PE instance directly. Also, pnv_ioda_setup_bus_PE()
> returns the reserved/allocated PE instance to be used in subsequent
> patches. On the other hand, pnv_ioda_free_pe() uses PE instance
> (not number) as its argument. No logical changes introduced.
>
> Signed-off-by: Gavin Shan <gwshan@linux.vnet.ibm.com>
Reviewed-by: Alexey Kardashevskiy <aik@ozlabs.ru>
> ---
> arch/powerpc/platforms/powernv/pci-ioda.c | 104 +++++++++++++++++-------------
> arch/powerpc/platforms/powernv/pci.h | 2 +-
> 2 files changed, 59 insertions(+), 47 deletions(-)
>
> diff --git a/arch/powerpc/platforms/powernv/pci-ioda.c b/arch/powerpc/platforms/powernv/pci-ioda.c
> index 7800897..f182ca7 100644
> --- a/arch/powerpc/platforms/powernv/pci-ioda.c
> +++ b/arch/powerpc/platforms/powernv/pci-ioda.c
> @@ -119,6 +119,14 @@ static inline bool pnv_pci_is_mem_pref_64(unsigned long flags)
> (IORESOURCE_MEM_64 | IORESOURCE_PREFETCH));
> }
>
> +static struct pnv_ioda_pe *pnv_ioda_init_pe(struct pnv_phb *phb, int pe_no)
> +{
> + phb->ioda.pe_array[pe_no].phb = phb;
> + phb->ioda.pe_array[pe_no].pe_number = pe_no;
> +
> + return &phb->ioda.pe_array[pe_no];
> +}
> +
> static void pnv_ioda_reserve_pe(struct pnv_phb *phb, int pe_no)
> {
> if (!(pe_no >= 0 && pe_no < phb->ioda.total_pe_num)) {
> @@ -131,11 +139,10 @@ static void pnv_ioda_reserve_pe(struct pnv_phb *phb, int pe_no)
> pr_debug("%s: PE %d was reserved on PHB#%x\n",
> __func__, pe_no, phb->hose->global_number);
>
> - phb->ioda.pe_array[pe_no].phb = phb;
> - phb->ioda.pe_array[pe_no].pe_number = pe_no;
> + pnv_ioda_init_pe(phb, pe_no);
> }
>
> -static int pnv_ioda_alloc_pe(struct pnv_phb *phb)
> +static struct pnv_ioda_pe *pnv_ioda_alloc_pe(struct pnv_phb *phb)
> {
> unsigned long pe;
>
> @@ -143,20 +150,20 @@ static int pnv_ioda_alloc_pe(struct pnv_phb *phb)
> pe = find_next_zero_bit(phb->ioda.pe_alloc,
> phb->ioda.total_pe_num, 0);
> if (pe >= phb->ioda.total_pe_num)
> - return IODA_INVALID_PE;
> + return NULL;
> } while(test_and_set_bit(pe, phb->ioda.pe_alloc));
>
> - phb->ioda.pe_array[pe].phb = phb;
> - phb->ioda.pe_array[pe].pe_number = pe;
> - return pe;
> + return pnv_ioda_init_pe(phb, pe);
> }
>
> -static void pnv_ioda_free_pe(struct pnv_phb *phb, int pe)
> +static void pnv_ioda_free_pe(struct pnv_ioda_pe *pe)
> {
> - WARN_ON(phb->ioda.pe_array[pe].pdev);
> + struct pnv_phb *phb = pe->phb;
>
> - memset(&phb->ioda.pe_array[pe], 0, sizeof(struct pnv_ioda_pe));
> - clear_bit(pe, phb->ioda.pe_alloc);
> + WARN_ON(pe->pdev);
> +
> + memset(pe, 0, sizeof(struct pnv_ioda_pe));
> + clear_bit(pe->pe_number, phb->ioda.pe_alloc);
> }
>
> /* The default M64 BAR is shared by all PEs */
> @@ -316,7 +323,7 @@ static void pnv_ioda_reserve_m64_pe(struct pci_bus *bus,
> }
> }
>
> -static int pnv_ioda_pick_m64_pe(struct pci_bus *bus, bool all)
> +static struct pnv_ioda_pe *pnv_ioda_pick_m64_pe(struct pci_bus *bus, bool all)
> {
> struct pci_controller *hose = pci_bus_to_host(bus);
> struct pnv_phb *phb = hose->private_data;
> @@ -326,7 +333,7 @@ static int pnv_ioda_pick_m64_pe(struct pci_bus *bus, bool all)
>
> /* Root bus shouldn't use M64 */
> if (pci_is_root_bus(bus))
> - return IODA_INVALID_PE;
> + return NULL;
>
> /* Allocate bitmap */
> size = _ALIGN_UP(phb->ioda.total_pe_num / 8, sizeof(unsigned long));
> @@ -334,7 +341,7 @@ static int pnv_ioda_pick_m64_pe(struct pci_bus *bus, bool all)
> if (!pe_alloc) {
> pr_warn("%s: Out of memory !\n",
> __func__);
> - return IODA_INVALID_PE;
> + return NULL;
> }
>
> /* Figure out reserved PE numbers by the PE */
> @@ -347,7 +354,7 @@ static int pnv_ioda_pick_m64_pe(struct pci_bus *bus, bool all)
> */
> if (bitmap_empty(pe_alloc, phb->ioda.total_pe_num)) {
> kfree(pe_alloc);
> - return IODA_INVALID_PE;
> + return NULL;
> }
>
> /*
> @@ -393,7 +400,7 @@ static int pnv_ioda_pick_m64_pe(struct pci_bus *bus, bool all)
> }
>
> kfree(pe_alloc);
> - return master_pe->pe_number;
> + return master_pe;
> }
>
> static void __init pnv_ioda_parse_m64_window(struct pnv_phb *phb)
> @@ -959,7 +966,6 @@ static struct pnv_ioda_pe *pnv_ioda_setup_dev_PE(struct pci_dev *dev)
> struct pnv_phb *phb = hose->private_data;
> struct pci_dn *pdn = pci_get_pdn(dev);
> struct pnv_ioda_pe *pe;
> - int pe_num;
>
> if (!pdn) {
> pr_err("%s: Device tree node not associated properly\n",
> @@ -969,8 +975,8 @@ static struct pnv_ioda_pe *pnv_ioda_setup_dev_PE(struct pci_dev *dev)
> if (pdn->pe_number != IODA_INVALID_PE)
> return NULL;
>
> - pe_num = pnv_ioda_alloc_pe(phb);
> - if (pe_num == IODA_INVALID_PE) {
> + pe = pnv_ioda_alloc_pe(phb);
> + if (!pe) {
> pr_warning("%s: Not enough PE# available, disabling device\n",
> pci_name(dev));
> return NULL;
> @@ -983,10 +989,9 @@ static struct pnv_ioda_pe *pnv_ioda_setup_dev_PE(struct pci_dev *dev)
> *
> * At some point we want to remove the PDN completely anyways
> */
> - pe = &phb->ioda.pe_array[pe_num];
> pci_dev_get(dev);
> pdn->pcidev = dev;
> - pdn->pe_number = pe_num;
> + pdn->pe_number = pe->pe_number;
> pe->flags = PNV_IODA_PE_DEV;
> pe->pdev = dev;
> pe->pbus = NULL;
> @@ -997,8 +1002,7 @@ static struct pnv_ioda_pe *pnv_ioda_setup_dev_PE(struct pci_dev *dev)
>
> if (pnv_ioda_configure_pe(phb, pe)) {
> /* XXX What do we do here ? */
> - if (pe_num)
> - pnv_ioda_free_pe(phb, pe_num);
> + pnv_ioda_free_pe(pe);
> pdn->pe_number = IODA_INVALID_PE;
> pe->pdev = NULL;
> pci_dev_put(dev);
> @@ -1033,28 +1037,26 @@ static void pnv_ioda_setup_same_PE(struct pci_bus *bus, struct pnv_ioda_pe *pe)
> * subordinate PCI devices and buses. The second type of PE is normally
> * orgiriated by PCIe-to-PCI bridge or PLX switch downstream ports.
> */
> -static void pnv_ioda_setup_bus_PE(struct pci_bus *bus, bool all)
> +static struct pnv_ioda_pe *pnv_ioda_setup_bus_PE(struct pci_bus *bus, bool all)
> {
> struct pci_controller *hose = pci_bus_to_host(bus);
> struct pnv_phb *phb = hose->private_data;
> - struct pnv_ioda_pe *pe;
> - int pe_num = IODA_INVALID_PE;
> + struct pnv_ioda_pe *pe = NULL;
>
> /* Check if PE is determined by M64 */
> if (phb->pick_m64_pe)
> - pe_num = phb->pick_m64_pe(bus, all);
> + pe = phb->pick_m64_pe(bus, all);
>
> /* The PE number isn't pinned by M64 */
> - if (pe_num == IODA_INVALID_PE)
> - pe_num = pnv_ioda_alloc_pe(phb);
> + if (!pe)
> + pe = pnv_ioda_alloc_pe(phb);
>
> - if (pe_num == IODA_INVALID_PE) {
> + if (!pe) {
> pr_warning("%s: Not enough PE# available for PCI bus %04x:%02x\n",
> __func__, pci_domain_nr(bus), bus->number);
> - return;
> + return NULL;
> }
>
> - pe = &phb->ioda.pe_array[pe_num];
> pe->flags |= (all ? PNV_IODA_PE_BUS_ALL : PNV_IODA_PE_BUS);
> pe->pbus = bus;
> pe->pdev = NULL;
> @@ -1063,17 +1065,16 @@ static void pnv_ioda_setup_bus_PE(struct pci_bus *bus, bool all)
>
> if (all)
> pe_info(pe, "Secondary bus %d..%d associated with PE#%d\n",
> - bus->busn_res.start, bus->busn_res.end, pe_num);
> + bus->busn_res.start, bus->busn_res.end, pe->pe_number);
> else
> pe_info(pe, "Secondary bus %d associated with PE#%d\n",
> - bus->busn_res.start, pe_num);
> + bus->busn_res.start, pe->pe_number);
>
> if (pnv_ioda_configure_pe(phb, pe)) {
> /* XXX What do we do here ? */
> - if (pe_num)
> - pnv_ioda_free_pe(phb, pe_num);
> + pnv_ioda_free_pe(pe);
> pe->pbus = NULL;
> - return;
> + return NULL;
> }
>
> /* Associate it with all child devices */
> @@ -1081,6 +1082,8 @@ static void pnv_ioda_setup_bus_PE(struct pci_bus *bus, bool all)
>
> /* Put PE to the list */
> list_add_tail(&pe->list, &phb->ioda.pe_list);
> +
> + return pe;
> }
>
> static struct pnv_ioda_pe *pnv_ioda_setup_npu_PE(struct pci_dev *npu_pdev)
> @@ -1392,7 +1395,7 @@ static void pnv_ioda_release_vf_PE(struct pci_dev *pdev)
>
> pnv_ioda_deconfigure_pe(phb, pe);
>
> - pnv_ioda_free_pe(phb, pe->pe_number);
> + pnv_ioda_free_pe(pe);
> }
> }
>
> @@ -1401,6 +1404,7 @@ void pnv_pci_sriov_disable(struct pci_dev *pdev)
> struct pci_bus *bus;
> struct pci_controller *hose;
> struct pnv_phb *phb;
> + struct pnv_ioda_pe *pe;
> struct pci_dn *pdn;
> struct pci_sriov *iov;
> u16 num_vfs, i;
> @@ -1425,8 +1429,11 @@ void pnv_pci_sriov_disable(struct pci_dev *pdev)
> /* Release PE numbers */
> if (pdn->m64_single_mode) {
> for (i = 0; i < num_vfs; i++) {
> - if (pdn->pe_num_map[i] != IODA_INVALID_PE)
> - pnv_ioda_free_pe(phb, pdn->pe_num_map[i]);
> + if (pdn->pe_num_map[i] == IODA_INVALID_PE)
> + continue;
> +
> + pe = &phb->ioda.pe_array[pdn->pe_num_map[i]];
> + pnv_ioda_free_pe(pe);
> }
> } else
> bitmap_clear(phb->ioda.pe_alloc, *pdn->pe_num_map, num_vfs);
> @@ -1479,8 +1486,7 @@ static void pnv_ioda_setup_vf_PE(struct pci_dev *pdev, u16 num_vfs)
>
> if (pnv_ioda_configure_pe(phb, pe)) {
> /* XXX What do we do here ? */
> - if (pe_num)
> - pnv_ioda_free_pe(phb, pe_num);
> + pnv_ioda_free_pe(pe);
> pe->pdev = NULL;
> continue;
> }
> @@ -1499,6 +1505,7 @@ int pnv_pci_sriov_enable(struct pci_dev *pdev, u16 num_vfs)
> struct pci_bus *bus;
> struct pci_controller *hose;
> struct pnv_phb *phb;
> + struct pnv_ioda_pe *pe;
> struct pci_dn *pdn;
> int ret;
> u16 i;
> @@ -1541,11 +1548,13 @@ int pnv_pci_sriov_enable(struct pci_dev *pdev, u16 num_vfs)
> /* Calculate available PE for required VFs */
> if (pdn->m64_single_mode) {
> for (i = 0; i < num_vfs; i++) {
> - pdn->pe_num_map[i] = pnv_ioda_alloc_pe(phb);
> - if (pdn->pe_num_map[i] == IODA_INVALID_PE) {
> + pe = pnv_ioda_alloc_pe(phb);
> + if (!pe) {
> ret = -EBUSY;
> goto m64_failed;
> }
> +
> + pdn->pe_num_map[i] = pe->pe_number;
> }
> } else {
> mutex_lock(&phb->ioda.pe_alloc_mutex);
> @@ -1590,8 +1599,11 @@ int pnv_pci_sriov_enable(struct pci_dev *pdev, u16 num_vfs)
> m64_failed:
> if (pdn->m64_single_mode) {
> for (i = 0; i < num_vfs; i++) {
> - if (pdn->pe_num_map[i] != IODA_INVALID_PE)
> - pnv_ioda_free_pe(phb, pdn->pe_num_map[i]);
> + if (pdn->pe_num_map[i] == IODA_INVALID_PE)
> + continue;
> +
> + pe = &phb->ioda.pe_array[pdn->pe_num_map[i]];
> + pnv_ioda_free_pe(pe);
> }
> } else
> bitmap_clear(phb->ioda.pe_alloc, *pdn->pe_num_map, num_vfs);
> diff --git a/arch/powerpc/platforms/powernv/pci.h b/arch/powerpc/platforms/powernv/pci.h
> index 928cf81..ef9924a 100644
> --- a/arch/powerpc/platforms/powernv/pci.h
> +++ b/arch/powerpc/platforms/powernv/pci.h
> @@ -109,7 +109,7 @@ struct pnv_phb {
> int (*init_m64)(struct pnv_phb *phb);
> void (*reserve_m64_pe)(struct pci_bus *bus,
> unsigned long *pe_bitmap, bool all);
> - int (*pick_m64_pe)(struct pci_bus *bus, bool all);
> + struct pnv_ioda_pe *(*pick_m64_pe)(struct pci_bus *bus, bool all);
> int (*get_pe_state)(struct pnv_phb *phb, int pe_no);
> void (*freeze_pe)(struct pnv_phb *phb, int pe_no);
> int (*unfreeze_pe)(struct pnv_phb *phb, int pe_no, int opt);
>
--
Alexey
next prev parent reply other threads:[~2016-04-19 2:51 UTC|newest]
Thread overview: 152+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-02-17 3:43 [PATCH v8 00/45] powerpc/powernv: PCI hotplug support Gavin Shan
2016-02-17 3:43 ` [PATCH v8 01/45] PCI: Add pcibios_setup_bridge() Gavin Shan
2016-02-17 3:43 ` [PATCH v8 02/45] powerpc/pci: Override pcibios_setup_bridge() Gavin Shan
2016-04-13 5:52 ` Alexey Kardashevskiy
2016-02-17 3:43 ` [PATCH v8 03/45] powerpc/pci: Cleanup on struct pci_controller_ops Gavin Shan
2016-02-17 4:18 ` Andrew Donnellan
2016-04-13 5:52 ` Alexey Kardashevskiy
2016-04-19 23:59 ` Gavin Shan
2016-02-17 3:43 ` [PATCH v8 04/45] powerpc/powernv: Cleanup on pci_controller_ops instances Gavin Shan
2016-02-17 4:38 ` Andrew Donnellan
2016-02-17 3:43 ` [PATCH v8 05/45] powerpc/powernv: Drop phb->bdfn_to_pe() Gavin Shan
2016-04-13 5:53 ` Alexey Kardashevskiy
2016-02-17 3:43 ` [PATCH v8 06/45] powerpc/powernv: Reorder fields in struct pnv_phb Gavin Shan
2016-04-13 5:56 ` Alexey Kardashevskiy
2016-02-17 3:43 ` [PATCH v8 07/45] powerpc/powernv: Rename PE# " Gavin Shan
2016-04-13 5:57 ` Alexey Kardashevskiy
2016-02-17 3:43 ` [PATCH v8 08/45] powerpc/powernv: Fix initial IO and M32 segmap Gavin Shan
2016-04-13 6:21 ` Alexey Kardashevskiy
2016-04-13 7:53 ` Gavin Shan
2016-04-13 9:53 ` Alexey Kardashevskiy
2016-02-17 3:43 ` [PATCH v8 09/45] powerpc/powernv: Simplify pnv_ioda_setup_pe_seg() Gavin Shan
2016-04-13 6:45 ` Alexey Kardashevskiy
2016-04-20 0:04 ` Gavin Shan
2016-02-17 3:43 ` [PATCH v8 10/45] powerpc/powernv: IO and M32 mapping based on PCI device resources Gavin Shan
2016-02-17 3:43 ` [PATCH v8 11/45] powerpc/powernv: Track M64 segment consumption Gavin Shan
2016-04-13 7:09 ` Alexey Kardashevskiy
2016-04-20 0:05 ` Gavin Shan
2016-02-17 3:43 ` [PATCH v8 12/45] powerpc/powernv: Rename M64 related functions Gavin Shan
2016-04-13 7:20 ` Alexey Kardashevskiy
2016-02-17 3:43 ` [PATCH v8 13/45] powerpc/powernv/ioda1: M64 support on P7IOC Gavin Shan
2016-04-13 7:47 ` Alexey Kardashevskiy
2016-04-20 0:22 ` Gavin Shan
2016-04-20 2:55 ` Alexey Kardashevskiy
2016-02-17 3:43 ` [PATCH v8 14/45] powerpc/powernv/ioda1: Rename pnv_pci_ioda_setup_dma_pe() Gavin Shan
2016-04-13 7:36 ` Alexey Kardashevskiy
2016-02-17 3:43 ` [PATCH v8 15/45] powerpc/powernv/ioda1: Introduce PNV_IODA1_DMA32_SEGSIZE Gavin Shan
2016-04-13 8:29 ` Alexey Kardashevskiy
2016-04-13 23:54 ` Gavin Shan
2016-04-14 3:36 ` Alexey Kardashevskiy
2016-04-20 0:25 ` Gavin Shan
2016-02-17 3:43 ` [PATCH v8 16/45] powerpc/powernv: Remove DMA32 PE list Gavin Shan
2016-04-13 8:59 ` Alexey Kardashevskiy
2016-04-20 0:34 ` Gavin Shan
2016-02-17 3:44 ` [PATCH v8 17/45] powerpc/powernv/ioda1: Improve DMA32 segment track Gavin Shan
2016-04-19 1:50 ` Alexey Kardashevskiy
2016-04-20 0:49 ` Gavin Shan
2016-04-20 5:10 ` Alexey Kardashevskiy
2016-02-17 3:44 ` [PATCH v8 18/45] powerpc/powernv: Increase PE# capacity Gavin Shan
2016-04-19 2:02 ` Alexey Kardashevskiy
2016-04-20 0:52 ` Gavin Shan
2016-02-17 3:44 ` [PATCH v8 19/45] powerpc/powernv: Use PE instead of number during setup and release Gavin Shan
2016-04-19 2:50 ` Alexey Kardashevskiy [this message]
2016-02-17 3:44 ` [PATCH v8 20/45] powerpc/powernv: Allocate PE# in reverse order Gavin Shan
2016-04-19 3:07 ` Alexey Kardashevskiy
2016-04-20 1:04 ` Gavin Shan
2016-02-17 3:44 ` [PATCH v8 21/45] powerpc/powernv: Create PEs at PCI hot plugging time Gavin Shan
2016-04-19 4:16 ` Alexey Kardashevskiy
2016-04-20 1:12 ` Gavin Shan
2016-04-20 3:00 ` Alexey Kardashevskiy
2016-04-20 3:35 ` Gavin Shan
2016-02-17 3:44 ` [PATCH v8 22/45] powerpc/powernv/ioda1: Support releasing IODA1 TCE table Gavin Shan
2016-04-19 4:28 ` Alexey Kardashevskiy
2016-04-20 1:15 ` Gavin Shan
2016-04-20 3:17 ` Alexey Kardashevskiy
2016-02-17 3:44 ` [PATCH v8 23/45] powerpc/powernv: Dynamically release PEs Gavin Shan
2016-04-19 5:19 ` Alexey Kardashevskiy
2016-02-17 3:44 ` [PATCH v8 24/45] powerpc/pci: Rename pcibios_{add, remove}_pci_devices() Gavin Shan
2016-04-19 5:28 ` [PATCH v8 24/45] powerpc/pci: Rename pcibios_{add,remove}_pci_devices() Alexey Kardashevskiy
2016-04-20 1:23 ` Gavin Shan
2016-04-20 3:21 ` Alexey Kardashevskiy
2016-02-17 3:44 ` [PATCH v8 25/45] powerpc/pci: Rename pcibios_find_pci_bus() Gavin Shan
2016-04-19 5:31 ` Alexey Kardashevskiy
2016-02-17 3:44 ` [PATCH v8 26/45] powerpc/pci: Move pci_find_bus_by_node() around Gavin Shan
2016-02-17 3:44 ` [PATCH v8 27/45] powerpc/pci: Export pci_add_device_node_info() Gavin Shan
2016-04-19 5:35 ` Alexey Kardashevskiy
2016-02-17 3:44 ` [PATCH v8 28/45] powerpc/pci: Introduce pci_remove_device_node_info() Gavin Shan
2016-04-19 5:48 ` Alexey Kardashevskiy
2016-04-20 1:25 ` Gavin Shan
2016-02-17 3:44 ` [PATCH v8 29/45] powerpc/pci: Export pci_traverse_device_nodes() Gavin Shan
2016-04-19 5:51 ` Alexey Kardashevskiy
2016-04-20 1:27 ` Gavin Shan
2016-04-20 3:39 ` Alexey Kardashevskiy
2016-02-17 3:44 ` [PATCH v8 30/45] powerpc/pci: Delay populating pdn Gavin Shan
2016-04-19 8:19 ` Alexey Kardashevskiy
2016-04-20 2:13 ` Gavin Shan
2016-04-20 3:54 ` Alexey Kardashevskiy
2016-02-17 3:44 ` [PATCH v8 31/45] powerpc/pci: Don't scan empty slot Gavin Shan
2016-04-19 8:19 ` Alexey Kardashevskiy
2016-02-17 3:44 ` [PATCH v8 32/45] powerpc/pci: Update bridge windows on PCI plug Gavin Shan
2016-04-19 8:47 ` Alexey Kardashevskiy
2016-02-17 3:44 ` [PATCH v8 33/45] powerpc/powernv: Simplify pnv_eeh_reset() Gavin Shan
2016-02-17 4:35 ` Andrew Donnellan
2016-04-19 8:49 ` Alexey Kardashevskiy
2016-02-17 3:44 ` [PATCH v8 34/45] powerpc/powernv: Exclude root bus in pnv_pci_reset_secondary_bus() Gavin Shan
2016-04-19 8:57 ` Alexey Kardashevskiy
2016-02-17 3:44 ` [PATCH v8 35/45] powerpc/powernv: Fundamental reset " Gavin Shan
2016-04-19 9:04 ` Alexey Kardashevskiy
2016-04-20 1:36 ` Gavin Shan
2016-02-17 3:44 ` [PATCH v8 36/45] powerpc/powernv: Support PCI slot ID Gavin Shan
2016-04-19 9:28 ` Alexey Kardashevskiy
2016-04-20 2:28 ` Gavin Shan
2016-04-20 4:14 ` Alexey Kardashevskiy
2016-04-22 4:23 ` Alistair Popple
2016-02-17 3:44 ` [PATCH v8 37/45] powerpc/powernv: Use firmware PCI slot reset infrastructure Gavin Shan
2016-04-19 9:34 ` Alexey Kardashevskiy
2016-04-20 2:33 ` Gavin Shan
2016-04-20 4:17 ` Alexey Kardashevskiy
2016-02-17 3:44 ` [PATCH v8 38/45] powerpc/powernv: Functions to get/set PCI slot status Gavin Shan
2016-04-19 9:39 ` Alexey Kardashevskiy
2016-04-20 2:36 ` Gavin Shan
2016-04-20 4:25 ` Alexey Kardashevskiy
2016-02-17 3:44 ` [PATCH v8 39/45] powerpc/powernv: Select OF_DYNAMIC Gavin Shan
2016-04-19 9:42 ` Alexey Kardashevskiy
2016-04-20 2:38 ` Gavin Shan
2016-02-17 3:44 ` [PATCH v8 40/45] drivers/of: Split unflatten_dt_node() Gavin Shan
2016-02-17 14:30 ` Rob Herring
2016-04-20 2:38 ` Gavin Shan
2016-05-02 2:02 ` Gavin Shan
2016-02-17 3:44 ` [PATCH v8 41/45] drivers/of: Avoid recursively calling unflatten_dt_node() Gavin Shan
2016-02-17 14:53 ` Rob Herring
2016-02-17 3:44 ` [PATCH v8 42/45] drivers/of: Rename unflatten_dt_node() Gavin Shan
2016-02-17 14:59 ` Rob Herring
2016-02-19 3:16 ` Gavin Shan
2016-03-02 2:40 ` Rob Herring
2016-03-08 0:56 ` Gavin Shan
2016-03-17 13:31 ` Rob Herring
2016-03-17 22:44 ` Gavin Shan
2016-02-17 3:44 ` [PATCH v8 43/45] drivers/of: Specify parent node in of_fdt_unflatten_tree() Gavin Shan
2016-02-17 15:00 ` Rob Herring
2016-02-17 15:58 ` Jyri Sarha
2016-02-17 3:44 ` [PATCH v8 44/45] drivers/of: Return allocated memory from of_fdt_unflatten_tree() Gavin Shan
2016-02-17 3:44 ` [PATCH v8 45/45] PCI/hotplug: PowerPC PowerNV PCI hotplug driver Gavin Shan
2016-04-15 0:47 ` Alistair Popple
2016-04-15 1:39 ` Gavin Shan
2016-04-19 10:36 ` Alexey Kardashevskiy
2016-04-20 1:55 ` Alistair Popple
2016-05-02 23:41 ` Gavin Shan
2016-05-03 0:44 ` Alexey Kardashevskiy
2016-05-02 3:44 ` Gavin Shan
2016-05-02 6:11 ` Alexey Kardashevskiy
2016-05-02 23:38 ` Gavin Shan
2016-04-13 7:28 ` [PATCH v8 00/45] powerpc/powernv: PCI hotplug support Alexey Kardashevskiy
2016-04-13 7:42 ` Gavin Shan
2016-04-13 9:14 ` Alexey Kardashevskiy
2016-04-13 23:42 ` Gavin Shan
2016-04-13 23:57 ` Alistair Popple
2016-04-14 1:30 ` Gavin Shan
2016-04-14 3:38 ` Alexey Kardashevskiy
2016-04-15 16:10 ` Rob Herring
2016-04-20 2:40 ` Gavin Shan
2016-04-14 3:26 ` Alexey Kardashevskiy
2016-04-14 5:25 ` Gavin Shan
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=57159D11.9050808@ozlabs.ru \
--to=aik@ozlabs.ru \
--cc=benh@kernel.crashing.org \
--cc=bhelgaas@google.com \
--cc=devicetree@vger.kernel.org \
--cc=dja@axtens.net \
--cc=grant.likely@linaro.org \
--cc=gwshan@linux.vnet.ibm.com \
--cc=linux-pci@vger.kernel.org \
--cc=linuxppc-dev@lists.ozlabs.org \
--cc=mpe@ellerman.id.au \
--cc=robherring2@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).