From: Balbir Singh <bsingharora@gmail.com>
To: "Aneesh Kumar K.V" <aneesh.kumar@linux.vnet.ibm.com>,
benh@kernel.crashing.org, paulus@samba.org, mpe@ellerman.id.au
Cc: linuxppc-dev@lists.ozlabs.org
Subject: Re: [PATCH V2 41/68] powerpc/mm/radix: Use STD_MMU_64 to properly isolate hash related code
Date: Fri, 22 Apr 2016 17:32:49 +1000 [thread overview]
Message-ID: <5719D3A1.8070008@gmail.com> (raw)
In-Reply-To: <1460182444-2468-42-git-send-email-aneesh.kumar@linux.vnet.ibm.com>
On 09/04/16 16:13, Aneesh Kumar K.V wrote:
> We also use MMU_FTR_RADIX to branch out from code path specific to
> hash.
>
> No functionality change.
>
> Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
> ---
> arch/powerpc/kernel/entry_64.S | 7 +++++--
> arch/powerpc/kernel/exceptions-64s.S | 28 +++++++++++++++++++++++-----
> arch/powerpc/kernel/machine_kexec_64.c | 6 ++++--
> arch/powerpc/kernel/mce_power.c | 10 ++++++++++
> arch/powerpc/kernel/process.c | 15 +++++++++------
> arch/powerpc/xmon/xmon.c | 2 +-
> 6 files changed, 52 insertions(+), 16 deletions(-)
>
> diff --git a/arch/powerpc/kernel/entry_64.S b/arch/powerpc/kernel/entry_64.S
> index 9916d150b28c..8b9d68676d2b 100644
> --- a/arch/powerpc/kernel/entry_64.S
> +++ b/arch/powerpc/kernel/entry_64.S
> @@ -519,7 +519,10 @@ END_FTR_SECTION_IFSET(CPU_FTR_STCX_CHECKS_ADDRESS)
> std r6,PACACURRENT(r13) /* Set new 'current' */
>
> ld r8,KSP(r4) /* new stack pointer */
> -#ifdef CONFIG_PPC_BOOK3S
> +#ifdef CONFIG_PPC_STD_MMU_64
> +BEGIN_MMU_FTR_SECTION
> + b 2f
> +END_MMU_FTR_SECTION_IFSET(MMU_FTR_RADIX)
> BEGIN_FTR_SECTION
> clrrdi r6,r8,28 /* get its ESID */
> clrrdi r9,r1,28 /* get current sp ESID */
> @@ -565,7 +568,7 @@ END_MMU_FTR_SECTION_IFSET(MMU_FTR_1T_SEGMENT)
> slbmte r7,r0
> isync
> 2:
> -#endif /* !CONFIG_PPC_BOOK3S */
> +#endif /* CONFIG_PPC_STD_MMU_64 */
>
> CURRENT_THREAD_INFO(r7, r8) /* base of new stack */
> /* Note: this uses SWITCH_FRAME_SIZE rather than INT_FRAME_SIZE
> diff --git a/arch/powerpc/kernel/exceptions-64s.S b/arch/powerpc/kernel/exceptions-64s.S
> index 7716cebf4b8e..d2afec81d04d 100644
> --- a/arch/powerpc/kernel/exceptions-64s.S
> +++ b/arch/powerpc/kernel/exceptions-64s.S
> @@ -983,7 +983,13 @@ data_access_common:
> ld r3,PACA_EXGEN+EX_DAR(r13)
> lwz r4,PACA_EXGEN+EX_DSISR(r13)
> li r5,0x300
> + std r3,_DAR(r1)
> + std r4,_DSISR(r1)
> +BEGIN_MMU_FTR_SECTION
> b do_hash_page /* Try to handle as hpte fault */
> +MMU_FTR_SECTION_ELSE
> + b handle_page_fault
Normal kernel page fault handler?
> +ALT_MMU_FTR_SECTION_END_IFCLR(MMU_FTR_RADIX)
>
> .align 7
> .globl h_data_storage_common
> @@ -1008,7 +1014,13 @@ instruction_access_common:
> ld r3,_NIP(r1)
> andis. r4,r12,0x5820
> li r5,0x400
> + std r3,_DAR(r1)
> + std r4,_DSISR(r1)
> +BEGIN_MMU_FTR_SECTION
> b do_hash_page /* Try to handle as hpte fault */
> +MMU_FTR_SECTION_ELSE
> + b handle_page_fault
> +ALT_MMU_FTR_SECTION_END_IFCLR(MMU_FTR_RADIX)
>
> STD_EXCEPTION_COMMON(0xe20, h_instr_storage, unknown_exception)
>
> @@ -1476,8 +1488,11 @@ slb_miss_realmode:
> stw r9,PACA_EXSLB+EX_CCR(r13) /* save CR in exc. frame */
> std r10,PACA_EXSLB+EX_LR(r13) /* save LR */
>
> +#ifdef CONFIG_PPC_STD_MMU_64
> +BEGIN_MMU_FTR_SECTION
> bl slb_allocate_realmode
> -
> +END_MMU_FTR_SECTION_IFCLR(MMU_FTR_RADIX)
> +#endif
> /* All done -- return from exception. */
>
> ld r10,PACA_EXSLB+EX_LR(r13)
> @@ -1485,7 +1500,9 @@ slb_miss_realmode:
> lwz r9,PACA_EXSLB+EX_CCR(r13) /* get saved CR */
>
> mtlr r10
> -
> +BEGIN_MMU_FTR_SECTION
> + b 2f
> +END_MMU_FTR_SECTION_IFSET(MMU_FTR_RADIX)
> andi. r10,r12,MSR_RI /* check for unrecoverable exception */
> beq- 2f
>
> @@ -1536,9 +1553,7 @@ power4_fixup_nap:
> */
> .align 7
> do_hash_page:
> - std r3,_DAR(r1)
> - std r4,_DSISR(r1)
> -
> +#ifdef CONFIG_PPC_STD_MMU_64
> andis. r0,r4,0xa410 /* weird error? */
> bne- handle_page_fault /* if not, try to insert a HPTE */
> andis. r0,r4,DSISR_DABRMATCH@h
> @@ -1566,6 +1581,7 @@ do_hash_page:
>
> /* Error */
> blt- 13f
> +#endif /* CONFIG_PPC_STD_MMU_64 */
>
> /* Here we have a page fault that hash_page can't handle. */
> handle_page_fault:
> @@ -1592,6 +1608,7 @@ handle_dabr_fault:
> 12: b ret_from_except_lite
>
>
> +#ifdef CONFIG_PPC_STD_MMU_64
> /* We have a page fault that hash_page could handle but HV refused
> * the PTE insertion
> */
> @@ -1601,6 +1618,7 @@ handle_dabr_fault:
> ld r4,_DAR(r1)
> bl low_hash_fault
> b ret_from_except
> +#endif
>
> /*
> * We come here as a result of a DSI at a point where we don't want
> diff --git a/arch/powerpc/kernel/machine_kexec_64.c b/arch/powerpc/kernel/machine_kexec_64.c
> index 0fbd75d185d7..1da864c00db0 100644
> --- a/arch/powerpc/kernel/machine_kexec_64.c
> +++ b/arch/powerpc/kernel/machine_kexec_64.c
> @@ -76,6 +76,7 @@ int default_machine_kexec_prepare(struct kimage *image)
> * end of the blocked region (begin >= high). Use the
> * boolean identity !(a || b) === (!a && !b).
> */
> +#ifdef CONFIG_PPC_STD_MMU_64
> if (htab_address) {
> low = __pa(htab_address);
> high = low + htab_size_bytes;
> @@ -88,6 +89,7 @@ int default_machine_kexec_prepare(struct kimage *image)
> return -ETXTBSY;
> }
> }
> +#endif /* CONFIG_PPC_STD_MMU_64 */
>
> /* We also should not overwrite the tce tables */
> for_each_node_by_type(node, "pci") {
> @@ -381,7 +383,7 @@ void default_machine_kexec(struct kimage *image)
> /* NOTREACHED */
> }
>
> -#ifndef CONFIG_PPC_BOOK3E
> +#ifdef CONFIG_PPC_STD_MMU_64
> /* Values we need to export to the second kernel via the device tree. */
> static unsigned long htab_base;
> static unsigned long htab_size;
> @@ -428,4 +430,4 @@ static int __init export_htab_values(void)
> return 0;
> }
> late_initcall(export_htab_values);
> -#endif /* !CONFIG_PPC_BOOK3E */
> +#endif /* CONFIG_PPC_STD_MMU_64 */
> diff --git a/arch/powerpc/kernel/mce_power.c b/arch/powerpc/kernel/mce_power.c
> index ee62b197502d..92a66a2a9b85 100644
> --- a/arch/powerpc/kernel/mce_power.c
> +++ b/arch/powerpc/kernel/mce_power.c
> @@ -77,6 +77,7 @@ void __flush_tlb_power9(unsigned int action)
>
>
> /* flush SLBs and reload */
> +#ifdef CONFIG_PPC_MMU_STD_64
> static void flush_and_reload_slb(void)
> {
> struct slb_shadow *slb;
> @@ -110,6 +111,7 @@ static void flush_and_reload_slb(void)
> asm volatile("slbmte %0,%1" : : "r" (rs), "r" (rb));
> }
> }
> +#endif
>
> static long mce_handle_derror(uint64_t dsisr, uint64_t slb_error_bits)
> {
> @@ -120,6 +122,7 @@ static long mce_handle_derror(uint64_t dsisr, uint64_t slb_error_bits)
> * reset the error bits whenever we handle them so that at the end
> * we can check whether we handled all of them or not.
> * */
> +#ifdef CONFIG_PPC_MMU_STD_64
> if (dsisr & slb_error_bits) {
> flush_and_reload_slb();
> /* reset error bits */
> @@ -131,6 +134,7 @@ static long mce_handle_derror(uint64_t dsisr, uint64_t slb_error_bits)
> /* reset error bits */
> dsisr &= ~P7_DSISR_MC_TLB_MULTIHIT_MFTLB;
> }
> +#endif
> /* Any other errors we don't understand? */
> if (dsisr & 0xffffffffUL)
> handled = 0;
> @@ -150,6 +154,7 @@ static long mce_handle_common_ierror(uint64_t srr1)
> switch (P7_SRR1_MC_IFETCH(srr1)) {
> case 0:
> break;
> +#ifdef CONFIG_PPC_MMU_STD_64
> case P7_SRR1_MC_IFETCH_SLB_PARITY:
> case P7_SRR1_MC_IFETCH_SLB_MULTIHIT:
> /* flush and reload SLBs for SLB errors. */
> @@ -162,6 +167,7 @@ static long mce_handle_common_ierror(uint64_t srr1)
> handled = 1;
> }
> break;
> +#endif
> default:
> break;
> }
> @@ -175,10 +181,12 @@ static long mce_handle_ierror_p7(uint64_t srr1)
>
> handled = mce_handle_common_ierror(srr1);
>
> +#ifdef CONFIG_PPC_MMU_STD_64
> if (P7_SRR1_MC_IFETCH(srr1) == P7_SRR1_MC_IFETCH_SLB_BOTH) {
> flush_and_reload_slb();
> handled = 1;
> }
> +#endif
> return handled;
> }
>
> @@ -321,10 +329,12 @@ static long mce_handle_ierror_p8(uint64_t srr1)
>
> handled = mce_handle_common_ierror(srr1);
>
> +#ifdef CONFIG_PPC_MMU_STD_64
> if (P7_SRR1_MC_IFETCH(srr1) == P8_SRR1_MC_IFETCH_ERAT_MULTIHIT) {
> flush_and_reload_slb();
> handled = 1;
> }
> +#endif
> return handled;
> }
>
> diff --git a/arch/powerpc/kernel/process.c b/arch/powerpc/kernel/process.c
> index d7a9df51b974..e35b018be765 100644
> --- a/arch/powerpc/kernel/process.c
> +++ b/arch/powerpc/kernel/process.c
> @@ -1075,7 +1075,7 @@ struct task_struct *__switch_to(struct task_struct *prev,
> }
> #endif /* CONFIG_PPC64 */
>
> -#ifdef CONFIG_PPC_BOOK3S_64
> +#ifdef CONFIG_PPC_STD_MMU_64
> batch = this_cpu_ptr(&ppc64_tlb_batch);
> if (batch->active) {
> current_thread_info()->local_flags |= _TLF_LAZY_MMU;
> @@ -1083,7 +1083,7 @@ struct task_struct *__switch_to(struct task_struct *prev,
> __flush_tlb_pending(batch);
> batch->active = 0;
> }
> -#endif /* CONFIG_PPC_BOOK3S_64 */
> +#endif /* CONFIG_PPC_STD_MMU_64 */
>
> #ifdef CONFIG_PPC_ADV_DEBUG_REGS
> switch_booke_debug_regs(&new->thread.debug);
> @@ -1129,7 +1129,7 @@ struct task_struct *__switch_to(struct task_struct *prev,
>
> last = _switch(old_thread, new_thread);
>
> -#ifdef CONFIG_PPC_BOOK3S_64
> +#ifdef CONFIG_PPC_STD_MMU_64
> if (current_thread_info()->local_flags & _TLF_LAZY_MMU) {
> current_thread_info()->local_flags &= ~_TLF_LAZY_MMU;
> batch = this_cpu_ptr(&ppc64_tlb_batch);
> @@ -1138,8 +1138,7 @@ struct task_struct *__switch_to(struct task_struct *prev,
>
> if (current_thread_info()->task->thread.regs)
> restore_math(current_thread_info()->task->thread.regs);
> -
> -#endif /* CONFIG_PPC_BOOK3S_64 */
> +#endif /* CONFIG_PPC_STD_MMU_64 */
>
> return last;
> }
> @@ -1374,6 +1373,9 @@ static void setup_ksp_vsid(struct task_struct *p, unsigned long sp)
> unsigned long sp_vsid;
> unsigned long llp = mmu_psize_defs[mmu_linear_psize].sllp;
>
> + if (radix_enabled())
> + return;
> +
> if (mmu_has_feature(MMU_FTR_1T_SEGMENT))
> sp_vsid = get_kernel_vsid(sp, MMU_SEGSIZE_1T)
> << SLB_VSID_SHIFT_1T;
> @@ -1920,7 +1922,8 @@ unsigned long arch_randomize_brk(struct mm_struct *mm)
> * the heap, we can put it above 1TB so it is backed by a 1TB
> * segment. Otherwise the heap will be in the bottom 1TB
> * which always uses 256MB segments and this may result in a
> - * performance penalty.
> + * performance penalty. We don't need to worry about radix. For
> + * radix, mmu_highuser_ssize remains unchanged from 256MB.
> */
> if (!is_32bit_task() && (mmu_highuser_ssize == MMU_SEGSIZE_1T))
> base = max_t(unsigned long, mm->brk, 1UL << SID_SHIFT_1T);
> diff --git a/arch/powerpc/xmon/xmon.c b/arch/powerpc/xmon/xmon.c
> index 942796fa4767..308283b7b60c 100644
> --- a/arch/powerpc/xmon/xmon.c
> +++ b/arch/powerpc/xmon/xmon.c
> @@ -2913,7 +2913,7 @@ static void xmon_print_symbol(unsigned long address, const char *mid,
> printf("%s", after);
> }
>
> -#ifdef CONFIG_PPC_BOOK3S_64
> +#ifdef CONFIG_PPC_STD_MMU_64
> void dump_segments(void)
> {
> int i;
>
next prev parent reply other threads:[~2016-04-22 7:32 UTC|newest]
Thread overview: 139+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-04-09 6:12 [PATCH V2 00/68] PowerISA 3.0 Radix page table support Aneesh Kumar K.V
2016-04-09 6:12 ` [PATCH V2 01/68] powerpc/cxl: Use REGION_ID instead of opencoding Aneesh Kumar K.V
2016-04-11 0:37 ` Andrew Donnellan
2016-04-13 2:42 ` Aneesh Kumar K.V
2016-04-20 3:03 ` Michael Ellerman
2016-04-20 7:53 ` Aneesh Kumar K.V
2016-04-09 6:12 ` [PATCH V2 02/68] powerpc/mm/nohash: Return correctly from flush_tlb_page Aneesh Kumar K.V
2016-04-20 4:08 ` [V2, " Michael Ellerman
2016-04-20 7:49 ` Aneesh Kumar K.V
2016-04-09 6:12 ` [PATCH V2 03/68] powerpc/mm/nohash: Update non SMP version of flush_tlb_page to handle hugetlb address Aneesh Kumar K.V
2016-04-09 6:13 ` [PATCH V2 04/68] powerpc/mm: Use big endian page table for book3s 64 Aneesh Kumar K.V
2016-04-22 11:01 ` Michael Ellerman
2016-04-24 22:29 ` Aneesh Kumar K.V
2016-05-29 11:03 ` Anton Blanchard
2016-05-29 21:27 ` Benjamin Herrenschmidt
2016-05-29 23:08 ` Anton Blanchard
2016-05-30 3:42 ` Michael Ellerman
2016-05-30 5:31 ` Anton Blanchard
2016-05-30 8:42 ` Aneesh Kumar K.V
2016-05-30 11:00 ` Benjamin Herrenschmidt
2016-05-30 14:48 ` Aneesh Kumar K.V
2016-05-30 14:59 ` Segher Boessenkool
2016-04-09 6:13 ` [PATCH V2 05/68] powerpc/mm: use _PAGE_READ to indicate Read access Aneesh Kumar K.V
2016-04-09 6:13 ` [PATCH V2 06/68] powerpc/mm/subpage: Clear RWX bit to indicate no access Aneesh Kumar K.V
2016-04-09 6:13 ` [PATCH V2 07/68] powerpc/mm: Use pte_user instead of opencoding Aneesh Kumar K.V
2016-04-09 6:13 ` [PATCH V2 08/68] powerpc/mm: Replace _PAGE_USER with _PAGE_PRIVILEGED Aneesh Kumar K.V
2016-04-09 6:13 ` [PATCH V2 09/68] powerpc/mm: Remove RPN_SHIFT and RPN_SIZE Aneesh Kumar K.V
2016-04-09 6:13 ` [PATCH V2 10/68] powerpc/mm: Update _PAGE_KERNEL_RO Aneesh Kumar K.V
2016-11-20 0:43 ` [V2,10/68] " Geoff Levand
2016-11-20 18:03 ` Aneesh Kumar K.V
2016-11-21 0:33 ` Geoff Levand
2016-11-23 10:41 ` Aneesh Kumar K.V
2016-11-24 4:04 ` Geoff Levand
2016-04-09 6:13 ` [PATCH V2 11/68] powerpc/mm: Use helper for finding pte bits mapping I/O area Aneesh Kumar K.V
2016-04-09 6:13 ` [PATCH V2 12/68] powerpc/mm: Drop WIMG in favour of new constants Aneesh Kumar K.V
2016-04-09 6:13 ` [PATCH V2 13/68] powerpc/mm: Use generic version of pmdp_clear_flush_young Aneesh Kumar K.V
2016-04-09 6:13 ` [PATCH V2 14/68] powerpc/mm: Use generic version of ptep_clear_flush_young Aneesh Kumar K.V
2016-04-09 6:13 ` [PATCH V2 15/68] powerpc/mm: Move common data structure between radix and hash to book3s 64 generic headers Aneesh Kumar K.V
2016-04-09 6:13 ` [PATCH V2 16/68] powerpc/mm/power9: Add partition table format Aneesh Kumar K.V
2016-04-11 0:59 ` Balbir Singh
2016-04-09 6:13 ` [PATCH V2 17/68] powerpc/mm/hash: Add support for POWER9 hash Aneesh Kumar K.V
2016-04-11 4:55 ` Balbir Singh
2016-04-16 19:06 ` Aneesh Kumar K.V
2016-04-09 6:13 ` [PATCH V2 18/68] powerpc/mm: Move hash and no hash code to separate files Aneesh Kumar K.V
2016-04-11 5:14 ` Balbir Singh
2016-04-17 10:20 ` Aneesh Kumar K.V
2016-04-20 6:17 ` Balbir Singh
2016-04-09 6:13 ` [PATCH V2 19/68] powerpc/mm/book3s: Rename hash specific PTE bits to carry H_ prefix Aneesh Kumar K.V
2016-04-09 6:13 ` [PATCH V2 20/68] powerpc/mm: Handle _PTE_NONE_MASK Aneesh Kumar K.V
2016-04-11 6:09 ` Balbir Singh
2016-04-09 6:13 ` [PATCH V2 21/68] powerpc/mm: Move common pte bits and accessors to book3s/64/pgtable.h Aneesh Kumar K.V
2016-04-09 6:13 ` [PATCH V2 22/68] powerpc/mm: Move pte accessors that operate on common pte bits to pgtable.h Aneesh Kumar K.V
2016-04-09 6:13 ` [PATCH V2 23/68] powerpc/mm: Make page table size a variable Aneesh Kumar K.V
2016-04-12 1:49 ` Balbir Singh
2016-04-17 10:27 ` Aneesh Kumar K.V
2016-04-20 6:21 ` Balbir Singh
2016-04-09 6:13 ` [PATCH V2 24/68] powerpc/mm: Move page table index and and vaddr to pgtable.h Aneesh Kumar K.V
2016-04-09 6:13 ` [PATCH V2 25/68] powerpc/mm: Move pte related function together Aneesh Kumar K.V
2016-04-14 6:50 ` Balbir Singh
2016-04-09 6:13 ` [PATCH V2 26/68] powerpc/mm/radix: Add radix pte defines Aneesh Kumar K.V
2016-04-21 4:12 ` Balbir Singh
2016-04-23 8:30 ` Benjamin Herrenschmidt
2016-04-26 1:40 ` Balbir Singh
2016-04-09 6:13 ` [PATCH V2 27/68] powerpc/mm/radix: Dummy radix_enabled() Aneesh Kumar K.V
2016-04-21 4:27 ` Balbir Singh
2016-04-09 6:13 ` [PATCH V2 28/68] powerpc/mm: Add radix callbacks to pte accessors Aneesh Kumar K.V
2016-04-21 4:30 ` Balbir Singh
2016-04-09 6:13 ` [PATCH V2 29/68] powerpc/mm: Move hugetlb and THP related pmd accessors to pgtable.h Aneesh Kumar K.V
2016-04-21 9:53 ` Balbir Singh
2016-04-21 9:59 ` Michael Ellerman
2016-04-21 11:42 ` Balbir Singh
2016-04-09 6:13 ` [PATCH V2 30/68] powerpc/mm/radix: Add radix callback for pmd accessors Aneesh Kumar K.V
2016-04-21 11:39 ` Balbir Singh
2016-04-09 6:13 ` [PATCH V2 31/68] powerpc/mm: Abstraction for early init routines Aneesh Kumar K.V
2016-04-09 6:13 ` [PATCH V2 32/68] powerpc/mm/radix: Add radix callback " Aneesh Kumar K.V
2016-04-21 12:22 ` Balbir Singh
2016-04-09 6:13 ` [PATCH V2 33/68] powerpc/mm: Abstraction for vmemmap and map_kernel_page Aneesh Kumar K.V
2016-04-21 12:59 ` Balbir Singh
2016-04-28 6:17 ` Aneesh Kumar K.V
2016-04-09 6:13 ` [PATCH V2 34/68] powerpc/mm/radix: Add radix callback for vmemmap and map_kernel page Aneesh Kumar K.V
2016-04-21 13:46 ` Balbir Singh
2016-04-09 6:13 ` [PATCH V2 35/68] powerpc/mm: Abstraction for switch_mmu_context Aneesh Kumar K.V
2016-04-21 14:12 ` Balbir Singh
2016-04-28 6:13 ` Aneesh Kumar K.V
2016-04-28 6:13 ` Aneesh Kumar K.V
2016-04-09 6:13 ` [PATCH V2 36/68] powerpc/mm/radix: Add mmu context handling callback for radix Aneesh Kumar K.V
2016-04-22 6:19 ` Balbir Singh
2016-04-09 6:13 ` [PATCH V2 37/68] powerpc/mm: Rename mmu_context_hash64.c to mmu_context_book3s64.c Aneesh Kumar K.V
2016-04-09 6:13 ` [PATCH V2 38/68] powerpc/mm: Hash linux abstraction for tlbflush routines Aneesh Kumar K.V
2016-04-09 6:13 ` [PATCH V2 39/68] powerpc/mm/radix: Add " Aneesh Kumar K.V
2016-04-22 7:20 ` Balbir Singh
2016-04-09 6:13 ` [PATCH V2 40/68] powerpc/mm/radix: Add MMU_FTR_RADIX Aneesh Kumar K.V
2016-04-22 7:23 ` Balbir Singh
2016-04-09 6:13 ` [PATCH V2 41/68] powerpc/mm/radix: Use STD_MMU_64 to properly isolate hash related code Aneesh Kumar K.V
2016-04-22 7:32 ` Balbir Singh [this message]
2016-04-09 6:13 ` [PATCH V2 42/68] powerpc/mm/radix: Isolate hash table function from pseries guest code Aneesh Kumar K.V
2016-04-09 6:13 ` [PATCH V2 43/68] powerpc/mm/radix: Add checks in slice code to catch radix usage Aneesh Kumar K.V
2016-04-09 6:13 ` [PATCH V2 44/68] powerpc/mm/radix: Limit paca allocation in radix Aneesh Kumar K.V
2016-04-22 8:07 ` Balbir Singh
2016-04-09 6:13 ` [PATCH V2 45/68] powerpc/mm/radix: Pick the address layout for radix config Aneesh Kumar K.V
2016-04-09 6:13 ` [PATCH V2 46/68] powerpc/mm/radix: Update secondary PTCR Aneesh Kumar K.V
2016-04-09 6:13 ` [PATCH V2 47/68] powerpc/mm: Make a copy of pgalloc.h for 32 and 64 book3s Aneesh Kumar K.V
2016-04-09 6:13 ` [PATCH V2 48/68] powerpc/mm: Copy pgalloc (part 2) Aneesh Kumar K.V
2016-04-09 6:13 ` [PATCH V2 49/68] powerpc/mm: Revert changes made to nohash pgalloc-64.h Aneesh Kumar K.V
2016-04-09 6:13 ` [PATCH V2 50/68] powerpc/mm: Simplify the code dropping 4 level table #ifdef Aneesh Kumar K.V
2016-04-09 6:13 ` [PATCH V2 51/68] powerpc/mm: Rename function to indicate we are allocating fragments Aneesh Kumar K.V
2016-04-09 6:13 ` [PATCH V2 52/68] powerpc/mm: make 4k and 64k use pte_t for pgtable_t Aneesh Kumar K.V
2016-04-26 2:58 ` Balbir Singh
2016-04-28 6:03 ` Aneesh Kumar K.V
2016-04-09 6:13 ` [PATCH V2 53/68] powerpc/mm: Add radix pgalloc details Aneesh Kumar K.V
2016-04-26 3:05 ` Balbir Singh
2016-04-09 6:13 ` [PATCH V2 54/68] powerpc/mm: Update pte filter for radix Aneesh Kumar K.V
2016-04-26 3:06 ` Balbir Singh
2016-04-09 6:13 ` [PATCH V2 55/68] powerpc/mm: VMALLOC abstraction Aneesh Kumar K.V
2016-04-22 6:52 ` Michael Neuling
2016-04-23 3:29 ` Aneesh Kumar K.V
2016-04-26 6:20 ` Balbir Singh
2016-04-26 4:47 ` Balbir Singh
2016-04-28 6:09 ` Aneesh Kumar K.V
2016-04-09 6:13 ` [PATCH V2 56/68] powerpc/radix: update mmu cache Aneesh Kumar K.V
2016-04-26 6:23 ` Balbir Singh
2016-04-09 6:13 ` [PATCH V2 57/68] powerpc/mm: pte_frag abstraction Aneesh Kumar K.V
2016-04-09 6:13 ` [PATCH V2 58/68] powerpc/mm: Fix vma_mmu_pagesize for radix Aneesh Kumar K.V
2016-04-09 6:13 ` [PATCH V2 59/68] powerpc/mm: Add radix support for hugetlb Aneesh Kumar K.V
2016-04-09 6:13 ` [PATCH V2 60/68] powerpc/mm/radix: Make sure swapper pgdir is properly aligned Aneesh Kumar K.V
2016-04-09 6:13 ` [PATCH V2 61/68] powerpc/mm/radix: Add hugetlb support 4K page size Aneesh Kumar K.V
2016-04-09 6:13 ` [PATCH V2 62/68] powerpc/mm: Drop PTE_ATOMIC_UPDATES from pmd_hugepage_update Aneesh Kumar K.V
2016-04-09 6:13 ` [PATCH V2 63/68] powerpc/mm: THP is only available on hash64 as of now Aneesh Kumar K.V
2016-04-09 6:14 ` [PATCH V2 64/68] powerpc/mm/thp: Abstraction for THP functions Aneesh Kumar K.V
2016-04-09 6:14 ` [PATCH V2 65/68] powerpc/mm/radix: Add radix THP callbacks Aneesh Kumar K.V
2016-04-09 6:14 ` [PATCH V2 66/68] powerpc/mm/radix: Add THP support for 4k linux page size Aneesh Kumar K.V
2016-04-28 4:56 ` [V2, " Michael Ellerman
2016-04-28 6:28 ` Aneesh Kumar K.V
2016-04-09 6:14 ` [PATCH V2 67/68] powerpc/mm/radix: Cputable update for radix Aneesh Kumar K.V
2016-04-28 14:10 ` [V2,67/68] " Michael Ellerman
2016-04-09 6:14 ` [PATCH V2 68/68] powerpc/mm/radix: Use firmware feature to disable radix Aneesh Kumar K.V
2016-04-20 2:59 ` [V2, " Michael Ellerman
2016-04-20 8:21 ` Aneesh Kumar K.V
2016-04-20 11:25 ` Michael Neuling
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=5719D3A1.8070008@gmail.com \
--to=bsingharora@gmail.com \
--cc=aneesh.kumar@linux.vnet.ibm.com \
--cc=benh@kernel.crashing.org \
--cc=linuxppc-dev@lists.ozlabs.org \
--cc=mpe@ellerman.id.au \
--cc=paulus@samba.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).