From: Shreyas B Prabhu <shreyas@linux.vnet.ibm.com>
To: ego@linux.vnet.ibm.com
Cc: mpe@ellerman.id.au, linuxppc-dev@lists.ozlabs.org,
paulus@ozlabs.org, linux-kernel@vger.kernel.org,
mikey@neuling.org
Subject: Re: [PATCH v2 1/9] powerpc/powernv: Move CHECK_HMI_INTERRUPT to exception-64s header
Date: Wed, 18 May 2016 12:51:47 +0530 [thread overview]
Message-ID: <573C180B.8050201@linux.vnet.ibm.com> (raw)
In-Reply-To: <20160518043551.GA3939@in.ibm.com>
On 05/18/2016 10:05 AM, Gautham R Shenoy wrote:
> On Tue, May 03, 2016 at 01:54:30PM +0530, Shreyas B. Prabhu wrote:
>> CHECK_HMI_INTERRUPT is used to check for HMI's in reset vector. Move
>> the macro to a common location (exception-64s.h)
>> This patch does not change any functionality.
>>
>
> I suppose this code movement is to facilitate the invocation of
> CHECK_HMI_INTERRUPT in some later patch ? In this case you could
> add this to the commit message.
>
Ok. I'll do that.
> Otherwise,
> Reviewed-by: Gautham R. Shenoy <ego@linux.vnet.ibm.com>
Thanks for the review.
>> ---
>> arch/powerpc/include/asm/exception-64s.h | 18 ++++++++++++++++++
>> arch/powerpc/kernel/idle_power7.S | 20 +-------------------
>> 2 files changed, 19 insertions(+), 19 deletions(-)
>>
>> diff --git a/arch/powerpc/include/asm/exception-64s.h b/arch/powerpc/include/asm/exception-64s.h
>> index 93ae809..6a625af 100644
>> --- a/arch/powerpc/include/asm/exception-64s.h
>> +++ b/arch/powerpc/include/asm/exception-64s.h
>> @@ -545,4 +545,22 @@ END_FTR_SECTION_IFSET(CPU_FTR_CAN_NAP)
>> #define FINISH_NAP
>> #endif
>>
>> +#define CHECK_HMI_INTERRUPT \
>> + mfspr r0,SPRN_SRR1; \
>> +BEGIN_FTR_SECTION_NESTED(66); \
>> + rlwinm r0,r0,45-31,0xf; /* extract wake reason field (P8) */ \
>> +FTR_SECTION_ELSE_NESTED(66); \
>> + rlwinm r0,r0,45-31,0xe; /* P7 wake reason field is 3 bits */ \
>> +ALT_FTR_SECTION_END_NESTED_IFSET(CPU_FTR_ARCH_207S, 66); \
>> + cmpwi r0,0xa; /* Hypervisor maintenance ? */ \
>> + bne 20f; \
>> + /* Invoke opal call to handle hmi */ \
>> + ld r2,PACATOC(r13); \
>> + ld r1,PACAR1(r13); \
>> + std r3,ORIG_GPR3(r1); /* Save original r3 */ \
>> + li r0,OPAL_HANDLE_HMI; /* Pass opal token argument*/ \
>> + bl opal_call_realmode; \
>> + ld r3,ORIG_GPR3(r1); /* Restore original r3 */ \
>> +20: nop;
>> +
>> #endif /* _ASM_POWERPC_EXCEPTION_H */
>> diff --git a/arch/powerpc/kernel/idle_power7.S b/arch/powerpc/kernel/idle_power7.S
>> index 470ceeb..6b3404b 100644
>> --- a/arch/powerpc/kernel/idle_power7.S
>> +++ b/arch/powerpc/kernel/idle_power7.S
>> @@ -19,6 +19,7 @@
>> #include <asm/kvm_book3s_asm.h>
>> #include <asm/opal.h>
>> #include <asm/cpuidle.h>
>> +#include <asm/exception-64s.h>
>> #include <asm/book3s/64/mmu-hash.h>
>>
>> #undef DEBUG
>> @@ -257,25 +258,6 @@ _GLOBAL(power7_winkle)
>> b power7_powersave_common
>> /* No return */
>>
>> -#define CHECK_HMI_INTERRUPT \
>> - mfspr r0,SPRN_SRR1; \
>> -BEGIN_FTR_SECTION_NESTED(66); \
>> - rlwinm r0,r0,45-31,0xf; /* extract wake reason field (P8) */ \
>> -FTR_SECTION_ELSE_NESTED(66); \
>> - rlwinm r0,r0,45-31,0xe; /* P7 wake reason field is 3 bits */ \
>> -ALT_FTR_SECTION_END_NESTED_IFSET(CPU_FTR_ARCH_207S, 66); \
>> - cmpwi r0,0xa; /* Hypervisor maintenance ? */ \
>> - bne 20f; \
>> - /* Invoke opal call to handle hmi */ \
>> - ld r2,PACATOC(r13); \
>> - ld r1,PACAR1(r13); \
>> - std r3,ORIG_GPR3(r1); /* Save original r3 */ \
>> - li r0,OPAL_HANDLE_HMI; /* Pass opal token argument*/ \
>> - bl opal_call_realmode; \
>> - ld r3,ORIG_GPR3(r1); /* Restore original r3 */ \
>> -20: nop;
>> -
>> -
>> _GLOBAL(power7_wakeup_tb_loss)
>> ld r2,PACATOC(r13);
>> ld r1,PACAR1(r13)
>> --
>> 2.4.11
>>
next prev parent reply other threads:[~2016-05-18 7:22 UTC|newest]
Thread overview: 26+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-05-03 8:24 [PATCH v2 0/9] powerpc/powernv/cpuidle: Add support for POWER ISA v3 idle states Shreyas B. Prabhu
2016-05-03 8:24 ` [PATCH v2 1/9] powerpc/powernv: Move CHECK_HMI_INTERRUPT to exception-64s header Shreyas B. Prabhu
2016-05-18 4:35 ` Gautham R Shenoy
2016-05-18 7:21 ` Shreyas B Prabhu [this message]
2016-05-03 8:24 ` [PATCH v2 2/9] powerpc/kvm: make hypervisor state restore a function Shreyas B. Prabhu
2016-05-18 6:25 ` Gautham R Shenoy
2016-05-18 7:07 ` Shreyas B Prabhu
2016-05-19 14:24 ` Gautham R Shenoy
2016-05-20 1:45 ` Paul Mackerras
2016-05-03 8:24 ` [PATCH v2 3/9] powerpc/powernv: Move idle code usable by multiple hardware to common location Shreyas B. Prabhu
2016-05-18 6:29 ` Gautham R Shenoy
2016-05-03 8:24 ` [PATCH v2 4/9] powerpc/powernv: Make power7_powersave_common more generic Shreyas B. Prabhu
2016-05-18 6:37 ` Gautham R Shenoy
2016-05-18 6:51 ` Shreyas B Prabhu
2016-05-19 14:26 ` Gautham R Shenoy
2016-05-03 8:24 ` [PATCH v2 5/9] powerpc/powernv: Move idle related macros to cpuidle.h Shreyas B. Prabhu
2016-05-19 14:27 ` Gautham R Shenoy
2016-05-03 8:24 ` [PATCH v2 6/9] powerpc/powernv: set power_save func after the idle states are initialized Shreyas B. Prabhu
2016-05-18 6:45 ` Gautham R Shenoy
2016-05-03 8:24 ` [PATCH v2 7/9] powerpc/powernv: Add platform support for stop instruction Shreyas B. Prabhu
2016-05-18 17:57 ` Gautham R Shenoy
2016-05-20 5:25 ` Paul Mackerras
2016-05-20 6:16 ` Shreyas B Prabhu
2016-05-03 8:24 ` [PATCH v2 8/9] cpuidle/powernv: Add support for POWER ISA v3 idle states Shreyas B. Prabhu
2016-05-03 8:24 ` [PATCH v2 9/9] powerpc/powernv: Use deepest stop state when cpu is offlined Shreyas B. Prabhu
2016-05-18 18:07 ` Gautham R Shenoy
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=573C180B.8050201@linux.vnet.ibm.com \
--to=shreyas@linux.vnet.ibm.com \
--cc=ego@linux.vnet.ibm.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linuxppc-dev@lists.ozlabs.org \
--cc=mikey@neuling.org \
--cc=mpe@ellerman.id.au \
--cc=paulus@ozlabs.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).