Re: System crash on boot_e500.S on 2.4Kernel

["mike zheng" <mail4mz@gmail.com>]

[-- Attachment #1: Type: text/plain, Size: 3482 bytes --]

Here is the PC value before the rfi:

cds8458>halt
           Target CPU:           : MPC85xx (e500v2 rev.1)
           Target state            : halted
           Debug entry cause  : instruction breakpoint
           Current PC             : 0x0000015c
           Current CR             : 0x24024022
           Current MSR          : 0x00012100
           Current LR              :0x00000148
           Current CCSRBAR  :0x0_e000000

After the rfi:

#step timeout defected
 cds8458>halt
           Target CPU:           : MPC85xx (e500v2 rev.1)
           Target state            : halted
           Debug entry cause  : COP halt
           Current PC             : 0xfff81300
           Current CR             : 0x24024022
           Current MSR          : 0x00001000
           Current LR              :0x00000148
           Current CCSRBAR  :0x0_e000000



On 8/15/07, Becky Bruce <becky.bruce@freescale.com> wrote:
>
>
> On Aug 15, 2007, at 8:59 AM, mike zheng wrote:
>
> > I use BDI to debug these two instructions. And here are the output
> > of BDI just before the "rfi". The content of R6, R7 is different
> > from SRR0(SPR26) and SRR1(SPR27).
>
> I see you have not printed the pc/nia once you stop.  Are you sure
> you're stopped where you think?  Please check this.
>
> -B
>
> >
> > cds8548>res run
> >
> > - TARGET: processing user reset request
> >
> > - BDI asserts HRESET
> >
> > - Reset JTAG controller passed
> >
> > - JTAG exists check passed
> >
> > - IDCODE is 0x0003901D
> >
> > - SVR is 0x80390011
> >
> > - PVR is 0x80210010
> >
> > - CCSRBAR is 0x0_ff700000
> >
> > - BDI removes HRESET
> >
> > - TARGET: Target PVR is 0x80210010
> >
> > - TARGET: resetting target passed
> >
> > cds8548>halt
> >
> > Target CPU : MPC85xx (e500v2 rev.1)
> >
> > Target state : halted
> >
> > Debug entry cause : COP halt
> >
> > Current PC : 0xfff82560
> >
> > Current CR : 0x88000042
> >
> > Current MSR : 0x00021200
> >
> > Current LR : 0xfff8aa4c
> >
> > Current CCSRBAR : 0x0_e0000000
> >
> > cds8548>ci
> >
> > cds8548>bi 0x0000015c
> >
> > Breakpoint identification is 0
> >
> > cds8548>go
> >
> > - TARGET: stopped
> >
> > cds8548>rd
> >
> > GPR00: 00000000 0ffabd20 00000200 00000008
> >
> > GPR04: 00000000 00000001 00000020 00000160
> >
> > GPR08: 1f8b0808 00000148 0ffabace 0ffe08b0
> >
> > GPR12: 00000006 764deddb 10000300 007fff00
> >
> > GPR16: 00000001 ffffffff 007fff25 0ffff9d8
> >
> > GPR20: 007ffeb0 00000000 0fffaa3c 0ffae490
> >
> > GPR24: 00000000 00000003 02000040 007fff25
> >
> > GPR28: 007fff00 0ffab3b8 0fcd6000 007ffeb0
> >
> > CR : 24024022 MSR: 00021200
> >
> > cds8548>rdspr 26
> >
> > SPR 26 : 0xfff81300 - 519424
> >
> > cds8548>rdspr 27
> >
> > SPR 27 : 0x00001000 4096
> >
> > cds8548>
> >
> >
> >
> >
> >
> >
> > On 8/14/07, Andy Fleming <afleming@freescale.com> wrote:
> > On Aug 14, 2007, at 15:21, mike zheng wrote:
> >
> > >
> > > Hi All,
> > >
> > > I am trying to bring up MPC8548 CDS board on 2.4 kernel. I have
> > > problem in the head_e500.S. The "mtspr SRR0, r7; mtspr SRR1 r6"
> > > does not work for me. The content of R7 and R6 are not moved to
> > > SRR0 and SRR1.  I am using the tool-chain from Freescale for 2.6
> > > kernel.
> > >
> > > Any idea on this issue?
> >
> > Just to check...how do you know it doesn't work?
> >
> > Andy
> >
> > _______________________________________________
> > Linuxppc-embedded mailing list
> > Linuxppc-embedded@ozlabs.org
> > https://ozlabs.org/mailman/listinfo/linuxppc-embedded
>
>

[-- Attachment #2: Type: text/html, Size: 6346 bytes --]