* Early Debug message on MPC8568MDS
@ 2008-03-12 20:46 mike zheng
0 siblings, 0 replies; 2+ messages in thread
From: mike zheng @ 2008-03-12 20:46 UTC (permalink / raw)
To: linuxppc-embedded
Hello,
How can I enable the early debug message on 2.6.23 kernel for
MPC8568MDS board? What is the first line shall be displayed on the
serial port? The board uses the first port of UART, where does it
defined?
Thanks for your help,
Mike
^ permalink raw reply [flat|nested] 2+ messages in thread
* Early Debug message on MPC8568MDS
@ 2008-03-12 20:52 mike zheng
0 siblings, 0 replies; 2+ messages in thread
From: mike zheng @ 2008-03-12 20:52 UTC (permalink / raw)
To: linuxppc-dev
Hello,
How can I enable the early debug message on 2.6.23 kernel for
MPC8568MDS board? What is the first line shall be displayed on the
serial port? The board uses the first port of UART, where does it
defined?
Thanks for your help,
Mike
^ permalink raw reply [flat|nested] 2+ messages in thread
end of thread, other threads:[~2008-03-12 20:52 UTC | newest]
Thread overview: 2+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2008-03-12 20:46 Early Debug message on MPC8568MDS mike zheng
-- strict thread matches above, loose matches on Subject: below --
2008-03-12 20:52 mike zheng
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).