linuxppc-dev.lists.ozlabs.org archive mirror
 help / color / mirror / Atom feed
From: Christian Zigotzky <chzigotzky@xenosoft.de>
To: anpatel@nvidia.com, jkosina@suse.cz, linux-input@vger.kernel.org,
	linuxppc-dev <linuxppc-dev@lists.ozlabs.org>,
	Darren Stevens <darren@stevens-zone.net>,
	"R.T.Dickinson" <rtd2@xtra.co.nz>
Subject: [PASEMI] Nemo board doesn't reboot anymore after the commit "HID: usbhid: Add ALWAYS_POLL quirk for some mice"
Date: Thu, 22 Dec 2022 11:42:06 +0100	[thread overview]
Message-ID: <747e3240-bb3f-3a0c-e998-02f3b4826704@xenosoft.de> (raw)

Hello,

The Nemo board [1] doesn't reboot anymore since the final kernel 6.1. 
The reboot works with the RC8 of kernel 6.1.
Actually, a reboot works but the CFE firmware is not loaded. Maybe there 
is still something in the memory after the reboot.

I bisected today. [2]

The commit "HID: usbhid: Add ALWAYS_POLL quirk for some mice". [3] is 
the problem.

I was able to revert this commit and the reboot works without any 
problems again.

I created a patch for reverting the bad commit. [4]

Then compiled the kernel with this patch. After that, the X1000 reboots 
without any problems.

I use a Cherry USB mouse. [5]

Please check the bad commit.

Thanks,
Christian


[1] https://en.wikipedia.org/wiki/AmigaOne_X1000
[2] https://forum.hyperion-entertainment.com/viewtopic.php?p=56303#p56303
[3] 
https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?h=v6.1&id=f6d910a89a2391e5ce1f275d205023880a33d3f8
[4] usbhid.patch:

diff -rupN a/drivers/hid/hid-ids.h b/drivers/hid/hid-ids.h
--- a/drivers/hid/hid-ids.h    2022-12-22 10:24:06.842881276 +0100
+++ b/drivers/hid/hid-ids.h    2022-12-22 10:23:35.903328869 +0100
@@ -274,7 +274,6 @@
  #define USB_DEVICE_ID_CH_AXIS_295    0x001c

  #define USB_VENDOR_ID_CHERRY        0x046a
-#define USB_DEVICE_ID_CHERRY_MOUSE_000C    0x000c
  #define USB_DEVICE_ID_CHERRY_CYMOTION    0x0023
  #define USB_DEVICE_ID_CHERRY_CYMOTION_SOLAR    0x0027

@@ -919,7 +918,6 @@
  #define USB_DEVICE_ID_MS_XBOX_ONE_S_CONTROLLER    0x02fd
  #define USB_DEVICE_ID_MS_PIXART_MOUSE    0x00cb
  #define USB_DEVICE_ID_8BITDO_SN30_PRO_PLUS      0x02e0
-#define USB_DEVICE_ID_MS_MOUSE_0783      0x0783

  #define USB_VENDOR_ID_MOJO        0x8282
  #define USB_DEVICE_ID_RETRO_ADAPTER    0x3201
@@ -1388,7 +1386,6 @@

  #define USB_VENDOR_ID_PRIMAX    0x0461
  #define USB_DEVICE_ID_PRIMAX_MOUSE_4D22    0x4d22
-#define USB_DEVICE_ID_PRIMAX_MOUSE_4E2A    0x4e2a
  #define USB_DEVICE_ID_PRIMAX_KEYBOARD    0x4e05
  #define USB_DEVICE_ID_PRIMAX_REZEL    0x4e72
  #define USB_DEVICE_ID_PRIMAX_PIXART_MOUSE_4D0F    0x4d0f
diff -rupN a/drivers/hid/hid-quirks.c b/drivers/hid/hid-quirks.c
--- a/drivers/hid/hid-quirks.c    2022-12-22 10:24:06.844881247 +0100
+++ b/drivers/hid/hid-quirks.c    2022-12-22 10:23:35.904328855 +0100
@@ -54,7 +54,6 @@ static const struct hid_device_id hid_qu
      { HID_USB_DEVICE(USB_VENDOR_ID_CH, 
USB_DEVICE_ID_CH_FLIGHT_SIM_YOKE), HID_QUIRK_NOGET },
      { HID_USB_DEVICE(USB_VENDOR_ID_CH, USB_DEVICE_ID_CH_PRO_PEDALS), 
HID_QUIRK_NOGET },
      { HID_USB_DEVICE(USB_VENDOR_ID_CH, USB_DEVICE_ID_CH_PRO_THROTTLE), 
HID_QUIRK_NOGET },
-    { HID_USB_DEVICE(USB_VENDOR_ID_CHERRY, 
USB_DEVICE_ID_CHERRY_MOUSE_000C), HID_QUIRK_ALWAYS_POLL },
      { HID_USB_DEVICE(USB_VENDOR_ID_CORSAIR, 
USB_DEVICE_ID_CORSAIR_K65RGB), HID_QUIRK_NO_INIT_REPORTS },
      { HID_USB_DEVICE(USB_VENDOR_ID_CORSAIR, 
USB_DEVICE_ID_CORSAIR_K65RGB_RAPIDFIRE), HID_QUIRK_NO_INIT_REPORTS | 
HID_QUIRK_ALWAYS_POLL },
      { HID_USB_DEVICE(USB_VENDOR_ID_CORSAIR, 
USB_DEVICE_ID_CORSAIR_K70RGB), HID_QUIRK_NO_INIT_REPORTS },
@@ -123,7 +122,6 @@ static const struct hid_device_id hid_qu
      { HID_USB_DEVICE(USB_VENDOR_ID_LOGITECH, 
USB_DEVICE_ID_LOGITECH_MOUSE_C05A), HID_QUIRK_ALWAYS_POLL },
      { HID_USB_DEVICE(USB_VENDOR_ID_LOGITECH, 
USB_DEVICE_ID_LOGITECH_MOUSE_C06A), HID_QUIRK_ALWAYS_POLL },
      { HID_USB_DEVICE(USB_VENDOR_ID_MCS, 
USB_DEVICE_ID_MCS_GAMEPADBLOCK), HID_QUIRK_MULTI_INPUT },
-    { HID_USB_DEVICE(USB_VENDOR_ID_MICROSOFT, 
USB_DEVICE_ID_MS_MOUSE_0783), HID_QUIRK_ALWAYS_POLL },
      { HID_USB_DEVICE(USB_VENDOR_ID_MICROSOFT, 
USB_DEVICE_ID_MS_PIXART_MOUSE), HID_QUIRK_ALWAYS_POLL },
      { HID_USB_DEVICE(USB_VENDOR_ID_MICROSOFT, 
USB_DEVICE_ID_MS_POWER_COVER), HID_QUIRK_NO_INIT_REPORTS },
      { HID_USB_DEVICE(USB_VENDOR_ID_MICROSOFT, 
USB_DEVICE_ID_MS_SURFACE3_COVER), HID_QUIRK_NO_INIT_REPORTS },
@@ -148,7 +146,6 @@ static const struct hid_device_id hid_qu
      { HID_USB_DEVICE(USB_VENDOR_ID_PIXART, 
USB_DEVICE_ID_PIXART_OPTICAL_TOUCH_SCREEN), HID_QUIRK_NO_INIT_REPORTS },
      { HID_USB_DEVICE(USB_VENDOR_ID_PIXART, 
USB_DEVICE_ID_PIXART_USB_OPTICAL_MOUSE), HID_QUIRK_ALWAYS_POLL },
      { HID_USB_DEVICE(USB_VENDOR_ID_PRIMAX, 
USB_DEVICE_ID_PRIMAX_MOUSE_4D22), HID_QUIRK_ALWAYS_POLL },
-    { HID_USB_DEVICE(USB_VENDOR_ID_PRIMAX, 
USB_DEVICE_ID_PRIMAX_MOUSE_4E2A), HID_QUIRK_ALWAYS_POLL },
      { HID_USB_DEVICE(USB_VENDOR_ID_PRIMAX, 
USB_DEVICE_ID_PRIMAX_PIXART_MOUSE_4D0F), HID_QUIRK_ALWAYS_POLL },
      { HID_USB_DEVICE(USB_VENDOR_ID_PRIMAX, 
USB_DEVICE_ID_PRIMAX_PIXART_MOUSE_4D65), HID_QUIRK_ALWAYS_POLL },
      { HID_USB_DEVICE(USB_VENDOR_ID_PRIMAX, 
USB_DEVICE_ID_PRIMAX_PIXART_MOUSE_4E22), HID_QUIRK_ALWAYS_POLL },

[5]

Bus 003 Device 002: ID 046a:000c Cherry GmbH
Couldn't open device, some information will be missing
Device Descriptor:
   bLength                18
   bDescriptorType         1
   bcdUSB               1.10
   bDeviceClass            0
   bDeviceSubClass         0
   bDeviceProtocol         0
   bMaxPacketSize0         8
   idVendor           0x046a Cherry GmbH
   idProduct          0x000c
   bcdDevice            8.10
   iManufacturer           0
   iProduct                0
   iSerial                 0
   bNumConfigurations      1
   Configuration Descriptor:
     bLength                 9
     bDescriptorType         2
     wTotalLength       0x0022
     bNumInterfaces          1
     bConfigurationValue     1
     iConfiguration          0
     bmAttributes         0xa0
       (Bus Powered)
       Remote Wakeup
     MaxPower              100mA
     Interface Descriptor:
       bLength                 9
       bDescriptorType         4
       bInterfaceNumber        0
       bAlternateSetting       0
       bNumEndpoints           1
       bInterfaceClass         3 Human Interface Device
       bInterfaceSubClass      1 Boot Interface Subclass
       bInterfaceProtocol      2 Mouse
       iInterface              0
         HID Device Descriptor:
           bLength                 9
           bDescriptorType        33
           bcdHID               1.00
           bCountryCode            0 Not supported
           bNumDescriptors         1
           bDescriptorType        34 Report
           wDescriptorLength      52
          Report Descriptors:
            ** UNAVAILABLE **
       Endpoint Descriptor:
         bLength                 7
         bDescriptorType         5
         bEndpointAddress     0x81  EP 1 IN
         bmAttributes            3
           Transfer Type            Interrupt
           Synch Type               None
           Usage Type               Data
         wMaxPacketSize     0x0004  1x 4 bytes
         bInterval              10


             reply	other threads:[~2022-12-22 10:43 UTC|newest]

Thread overview: 7+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2022-12-22 10:42 Christian Zigotzky [this message]
2022-12-22 11:24 ` [PASEMI] Nemo board doesn't reboot anymore after the commit "HID: usbhid: Add ALWAYS_POLL quirk for some mice" #forregzbot Thorsten Leemhuis
2023-01-30 15:21   ` Linux kernel regression tracking (#update)
2023-01-06 14:29 ` [PASEMI] Nemo board doesn't reboot anymore after the commit "HID: usbhid: Add ALWAYS_POLL quirk for some mice" Christian Zigotzky
2023-01-06 14:41   ` Jiri Kosina
2023-01-17 13:51     ` Christian Zigotzky
2023-01-17 14:46       ` Jiri Kosina

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=747e3240-bb3f-3a0c-e998-02f3b4826704@xenosoft.de \
    --to=chzigotzky@xenosoft.de \
    --cc=anpatel@nvidia.com \
    --cc=darren@stevens-zone.net \
    --cc=jkosina@suse.cz \
    --cc=linux-input@vger.kernel.org \
    --cc=linuxppc-dev@lists.ozlabs.org \
    --cc=rtd2@xtra.co.nz \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).