From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: In-Reply-To: <002001c52aef$d29dbb70$9c9c9182@ddns.htc.nl.philips.com> References: <002001c52aef$d29dbb70$9c9c9182@ddns.htc.nl.philips.com> Mime-Version: 1.0 (Apple Message framework v619.2) Content-Type: text/plain; charset=ISO-8859-1; format=flowed Message-Id: <77bd0d4ff58c05c9207a1e401ccd13d5@aimsys.nl> From: Jaap-Jan Boor Date: Thu, 17 Mar 2005 13:57:56 +0100 To: "S. van Beek" Cc: Linuxppc-embedded@ozlabs.org Subject: Re: Problems with MontaVista Linux on a Memec Virtex-II pro ff672 board List-Id: Linux on Embedded PowerPC Developers Mail List List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , is there something printed before 'Now booting the kernel'? If so, do the memory ranges not overlap or something? Jaap-Jan On 17-mrt-05, at 13:49, S. van Beek wrote: > Hello there, > =A0 > This is our first post on this list, hi all! > We're two Dutch students working with a Virtex-II pro ff672 board from=20= > Memec with the Communications 2 module. We've compiled a simple kernel=20= > wich comes with MontaVista Linux=A03.1 (2.4.20) with ethernet and a=20 > serial port. It mounts its root filesystem over NFS and everything=20 > seems to work nicely. The next step we wanted to make was=20 > adding=A0support for the Flash=A0on the com board. We added the IP to = the=20 > hardware and loaded the new bitstream in the FPGA. Next thing, we=20 > enabled support for MTD devices in the kernel. After that, the kernel=20= > did not seem to boot anymore. It stopped at the message 'Now booting=20= > the kernel'. So we read some documentation about debugging. We=20 > recompiled this kernel with the -g -ggdb options and removed the -O=20 > (optimalization) flag. Then we did not even see the ppc boot loader=20 > messages anymore when trying to boot. So we tried to compile the first=20= > kernel (with only serial and ethernet support) -wich worked fine=20 > before-=A0with debugging and it gave us the same result.. no output at=20= > all. > Can anyone give us some hints on what we can try more to find out=20 > what is going wrong? > =A0 > Regards, > Sander van Beek > Daniel van Os > _______________________________________________ > Linuxppc-embedded mailing list > Linuxppc-embedded@ozlabs.org > https://ozlabs.org/mailman/listinfo/linuxppc-embedded J.G.J. Boor Anton Philipsweg 1 Software Engineer 1223 KZ Hilversum AimSys bv tel. +31 35 689 1941 Postbus 2194, 1200 CD Hilversum mailto:jjboor@aimsys.nl