From: Tiejun Chen <tiejun.china@gmail.com>
To: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: linuxppc-dev@ozlabs.org, akpm@linux-foundation.org
Subject: Re: [PATCH 1/1] Fix 64bit Mapple Host Bridge Address and Size Nodes
Date: Fri, 27 Feb 2009 09:55:51 +0800 [thread overview]
Message-ID: <7a800c8d0902261755s203ef8a1n52ffa12b51a5a12@mail.gmail.com> (raw)
In-Reply-To: <1235680139.7388.15.camel@pasglop>
[-- Attachment #1.1: Type: text/plain, Size: 4595 bytes --]
2009/2/27 Benjamin Herrenschmidt <benh@kernel.crashing.org>
> On Thu, 2009-02-26 at 18:08 +0800, Tiejun Chen wrote:
> > In the DTB tree created by firmware on Maple 64bit target, host bridge
> > parent
> > node has specified both of these two properties to be 2. However, the
> > actual
> > "cell" value for host bridge node is 1. we have to provide one fixup
> > function.
>
> Hi !
>
> Thanks for the patch. A couple of things tho: Can you make it a bit
> more robust by properly checking the board type first ?
That is ATCA 6101 and the following is from the MOTLoad firmware.
------
Copyright Motorola Inc. 1999-2006, All Rights Reserved
MOTLoad RTOS Version 2.0, PAL Version 1.1 RM01
Built on Tue Jun 13 10:31:56 EDT 2006 by q3316c
bbs 2.0 build 38
Part Number =01-W3930F04A
Serial Number =0000001
MPU-Type =PPC970FX DD3.1
MPU-Int Clock Speed =1800MHz
Memory Speed =333MHz
PCI bus instance 1 =64 bit, 100 MHz, PCI-X
PCI bus instance 2 =64 bit, 100 MHz, PCI-X
PCI bus instance 3 =64 bit, 100 MHz, PCI-X
PCI bus instance 4 =64 bit, 100 MHz, PCI-X
PCI bus instance 5 =32 bit, 33 MHz, PCI
HT Link instance 1 =16 bit, 400 MHz
HT Link instance 2 = 8 bit, 600 MHz
HT Link instance 3 = 8 bit, 200 MHz
MOTLoad FLASH Image =FLASH Bank A
Local Memory Found =080000000 (&2147483648)
User Download Buffer =0611A5000:0613A4FFF
------
Here is some board information I can know:
------
Board revision: 01
Boot loader version: 2.0
Silicon revision: 3.1 (pvr 003c 0301)
------
>
> Also, what is this "hostbridge" node ? ie, what does it represent ?
That means IBM CPC925 system controller resided on the ATCA 6101.
>
> Can you send me a full dump of /proc/device-tree from the machine ?
> (ie tar it up)
>
See the attachment.
>
> Finally, it looks like your patch was whitespace damaged by your mailer.
>
After you confirm others is ok I will send v2 improved patch.
Thanks & Best Regards
Tiejun
>
> Cheers,
> Ben.
>
>
> > Signed-off-by: Tiejun Chen <tiejun.china@gmail.com>
> > ---
> > arch/powerpc/kernel/prom_init.c | 42
> > +++++++++++++++++++++++++++++++++++++++
> > 1 files changed, 42 insertions(+), 0 deletions(-)
> >
> > diff --git a/arch/powerpc/kernel/prom_init.c
> > b/arch/powerpc/kernel/prom_init.c
> > index 2445945..9cd23b6 100644
> > --- a/arch/powerpc/kernel/prom_init.c
> > +++ b/arch/powerpc/kernel/prom_init.c
> > @@ -1948,8 +1948,49 @@ static void __init
> > fixup_device_tree_maple(void)
> > prom_setprop(isa, name, "ranges",
> > isa_ranges, sizeof(isa_ranges));
> > }
> > +
> > +/* On Maple 64bit target host bridge parent node has specified
> > address and
> > + * size properties to be 2. But the actual "cell" value for host
> > bridge node
> > + * is 1 since early MOTLoad internal bug. */
> > +static void __init fixup_device_tree_maple_hb(void)
> > +{
> > + phandle hb;
> > + u32 hb_ranges[4];
> > + u32 size_cell, addr_cell;
> > + struct prom_t *_prom = &RELOC(prom);
> > + char *name;
> > +
> > + name = "/hostbridge@f8000000";
> > + hb = call_prom("finddevice", 1, 1, ADDR(name));
> > + if (!PHANDLE_VALID(hb))
> > + return;
> > +
> > + if (prom_getproplen(hb, "reg") != 8)
> > + return;
> > +
> > + if (prom_getprop(hb, "reg", hb_ranges, (sizeof(hb_ranges))/2)
> > + == PROM_ERROR)
> > + return;
> > +
> > + prom_getprop(_prom->root, "#address-cells", &addr_cell,
> > sizeof(addr_cell));
> > + prom_getprop(_prom->root, "#size-cells", &size_cell,
> > sizeof(size_cell));
> > +
> > + if ((addr_cell != 2) || (size_cell != 2) ||
> > + (hb_ranges[0] != 0xf8000000))
> > + return;
> > +
> > + prom_printf("Fixing up bogus HOSTBRIDGE reg on
> > Maple/Apache...\n");
> > +
> > + hb_ranges[3] = hb_ranges[1];
> > + hb_ranges[1] = hb_ranges[0];
> > + hb_ranges[0] = hb_ranges[2] = 0;
> > + prom_setprop(hb, name, "reg",
> > + hb_ranges, sizeof(hb_ranges));
> > +}
> > +
> > #else
> > #define fixup_device_tree_maple()
> > +#define fixup_device_tree_maple_hb()
> > #endif
> >
> > #ifdef CONFIG_PPC_CHRP
> > @@ -2190,6 +2231,7 @@ static void __init fixup_device_tree_efika(void)
> > static void __init fixup_device_tree(void)
> > {
> > fixup_device_tree_maple();
> > + fixup_device_tree_maple_hb();
> > fixup_device_tree_chrp();
> > fixup_device_tree_pmac();
> > fixup_device_tree_efika();
> > --
> > 1.5.6
> >
> >
> >
>
>
[-- Attachment #1.2: Type: text/html, Size: 6476 bytes --]
[-- Attachment #2: maple.dts.gz --]
[-- Type: application/x-gzip, Size: 3230 bytes --]
next prev parent reply other threads:[~2009-02-27 1:55 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
[not found] <1235642785-9684-1-git-send-email-tiejun.chen@windriver.com>
2009-02-26 10:08 ` [PATCH 1/1] Fix 64bit Mapple Host Bridge Address and Size Nodes Tiejun Chen
2009-02-26 20:28 ` Benjamin Herrenschmidt
2009-02-27 1:55 ` Tiejun Chen [this message]
2009-03-03 5:31 ` Benjamin Herrenschmidt
2009-04-03 10:46 tiejun.china
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=7a800c8d0902261755s203ef8a1n52ffa12b51a5a12@mail.gmail.com \
--to=tiejun.china@gmail.com \
--cc=akpm@linux-foundation.org \
--cc=benh@kernel.crashing.org \
--cc=linuxppc-dev@ozlabs.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).