In the DTB tree created by firmware on some Maple 64bit targets, such as ATCA6101,
these two properties, address&size, should be 2. But the actual corresponding
values
of host bridge node are set 1 incorrectly by the firmware, we have to provide one
fixup function to fix that.

Signed-off-by: Tiejun Chen <tiejun.china@gmail.com>
---
arch/powerpc/kernel/prom_init.c | 51 ++++++++++++++++++++++++++++++++++++++-
1 files changed, 50 insertions(+), 1 deletions(-)

diff --git a/arch/powerpc/kernel/prom_init.c b/arch/powerpc/kernel/prom_init.c
index 2445945..7848b45 100644
--- a/arch/powerpc/kernel/prom_init.c
+++ b/arch/powerpc/kernel/prom_init.c
@@ -1907,14 +1907,63 @@ static void __init flatten_device_tree(void)
}

#ifdef CONFIG_PPC_MAPLE
+/* On ATCA6101 64bit target host bridge parent node has specified address and
+ * size properties to be 2. But the actual "cell" value for host bridge node
+ * is 1 since early MOTLoad internal bug. */
+static void __init fixup_device_tree_atca6101(void)
+{
+ phandle hb;
+ u32 hb_ranges[4];
+ u32 size_cell, addr_cell;
+ struct prom_t *_prom = &RELOC(prom);
+ char *name;
+
+ name = "/hostbridge@f8000000";
+ hb = call_prom("finddevice", 1, 1, ADDR(name));
+ if (!PHANDLE_VALID(hb))
+ return;
+
+ if (prom_getproplen(hb, "reg") != 8)
+ return;
+
+ if (prom_getprop(hb, "reg", hb_ranges, (sizeof(hb_ranges))/2)
+ == PROM_ERROR)
+ return;
+
+ prom_getprop(_prom->root, "#address-cells", &addr_cell, sizeof(addr_cell));
+ prom_getprop(_prom->root, "#size-cells", &size_cell, sizeof(size_cell));
+
+ if ((addr_cell != 2) || (size_cell != 2) ||
+ (hb_ranges[0] != 0xf8000000))
+ return;
+
+ prom_printf("Fixing up bogus HOSTBRIDGE reg on ATCA6101...\n");
+
+ hb_ranges[3] = hb_ranges[1];
+ hb_ranges[1] = hb_ranges[0];
+ hb_ranges[0] = hb_ranges[2] = 0;
+ prom_setprop(hb, name, "reg",
+ hb_ranges, sizeof(hb_ranges));
+}
/* PIBS Version 1.05.0000 04/26/2005 has an incorrect /ht/isa/ranges property.
- * The values are bad, and it doesn't even have the right number of cells. */
+ * The values are bad, and it doesn't even have the right number of cells.
+ * Additionally, the early MOTLoad generate incorrect address&size cells on
+ * some Maple platform such as ATCA6101. */
static void __init fixup_device_tree_maple(void)
{
phandle isa;
u32 rloc = 0x01002000; /* IO space; PCI device = 4 */
u32 isa_ranges[6];
char *name;
+ u32 node;
+ char prop[64];
+ int model;
+
+ /* FIXME: This may be used for more Maple targets not only ATCA6101. */
+ node = call_prom("finddevice", 1, 1, ADDR("/"));
+ model = prom_getprop(node, "model", prop, sizeof(prop));
+ if (model != PROM_ERROR && (strcmp(prop, "Motorola,ATCA-6101") == 0))
+ fixup_device_tree_atca6101();

name = "/ht@0/isa@4";
isa = call_prom("finddevice", 1, 1, ADDR(name));
--
1.5.6

_______________________________________________
Linuxppc-dev mailing list
Linuxppc-dev@ozlabs.org
https://ozlabs.org/mailman/listinfo/linuxppc-dev