Fwd: SecretLab 2.6.24 with USB

["Sam Karp" <sam.d.karp@gmail.com>]

[-- Attachment #1: Type: text/plain, Size: 18788 bytes --]

---------- Forwarded message ----------
From: Sam Karp <sam.d.karp@gmail.com>
Date: Wed, 23 Apr 2008 11:07:50 -0600
Subject: Re: SecretLab 2.6.24 with USB
To: Henrik Larson <henka@henka.dyndns.org>

I've been working on a similar tasks and I've gotten to the point where I
the driver is registered but the dev/sd* never appears...

Here is my boot record

    0.000000] Xilinx ML403 Reference System (Virtex-4 FX)
[    0.000000] Zone PFN ranges:
[    0.000000]   DMA             0 ->    16384
[    0.000000]   Normal      16384 ->    16384
[    0.000000] Movable zone start PFN for each node
[    0.000000] early_node_map[1] active PFN ranges
[    0.000000]     0:        0 ->    16384
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total
pages: 16256
[    0.000000] Kernel command line: console=ttyS0,9600 ip=on root=/dev/ram
rw
[    0.000000] Xilinx INTC #0 at 0xD1000FC0 mapped to 0xFDFFEFC0
[    0.000000] PID hash table entries: 256 (order: 8, 1024 bytes)
[    0.000291] Console: colour dummy device 80x25
[    0.000834] Dentry cache hash table entries: 8192 (order: 3, 32768 bytes)
[    0.002261] Inode-cache hash table entries: 4096 (order: 2, 16384 bytes)
[    0.024384] Memory: 57824k available (2140k kernel code, 676k data, 116k
init, 0k highmem)
[    0.109229] Mount-cache hash table entries: 512
[    0.115828] net_namespace: 64 bytes
[    0.127629] NET: Registered protocol family 16
[    0.161368] SCSI subsystem initialized
[    0.164286] usbcore: registered new interface driver usbfs
[    0.166272] usbcore: registered new interface driver hub
[    0.167635] usbcore: registered new device driver usb
[    0.191313] NET: Registered protocol family 2
[    0.225573] IP route cache hash table entries: 1024 (order: 0, 4096
bytes)
[    0.232430] TCP established hash table entries: 2048 (order: 2, 16384
bytes)
[    0.232957] TCP bind hash table entries: 2048 (order: 1, 8192 bytes)
[    0.233313] TCP: Hash tables configured (established 2048 bind 2048)
[    0.233392] TCP reno registered
[    0.246425] checking if image is initramfs...it isn't (no cpio magic);
looks like an initrd
[    6.697539] Freeing initrd memory: 4139k freed
[    6.710934] NTFS driver 2.1.29 [Flags: R/W DEBUG].
[    6.712392] io scheduler noop registered
[    6.712477] io scheduler anticipatory registered (default)
[    6.712556] io scheduler deadline registered
[    6.712866] io scheduler cfq registered
[    6.785910] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ
sharing disabled
[    6.794247] serial8250.0: ttyS0 at MMIO 0xa0001003 (irq = 1) is a 16450
[    6.794383] console [ttyS0] enabled
[    9.360220] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024
blocksize
[    9.451567] usbcore: registered new interface driver ub
[    9.513799] tun: Universal TUN/TAP device driver, 1.6
[    9.574089] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[    9.652324] st: Version 20070203, fixed bufsize 32768, s/g segs 256
[    9.727853] Driver 'st' needs updating - please use bus_type methods
[    9.804619] osst :I: Tape driver with OnStream support version 0.99.4
[    9.804687] osst :I: $Id: osst.c,v 1.73 2005/01/01 21:13:34 wriede Exp $
[    9.962812] Driver 'osst' needs updating - please use bus_type methods
[   10.042450] Driver 'sd' needs updating - please use bus_type methods
[   10.119058] Driver 'sr' needs updating - please use bus_type methods
[   10.196759] SCSI Media Changer driver v0.25
[   10.248311] Driver 'ch' needs updating - please use bus_type methods
[   10.326499] c67x00 c67x00.0: Cypress C67X00 Host Controller
[   10.394304] c67x00 c67x00.0: new USB bus registered, assigned bus number
1
[   10.481219] usb usb1: configuration #1 chosen from 1 choice
[   10.549168] hub 1-0:1.0: USB hub found
[   10.593456] hub 1-0:1.0: 2 ports detected
[   10.747294] usb usb1: Product: Cypress C67X00 Host Controller
[   10.815603] usb usb1: Manufacturer: Linux 2.6.24.4 c67x00-hcd
[   10.884341] usb usb1: SerialNumber: c67x00_sie
[   10.937452] udc requested but CONFIG_USB_GADGET_C67X00 not enabled!
[   11.013687] usbcore: registered new interface driver usblp
[   11.078909] Initializing USB Mass Storage driver...
[   11.138123] usbcore: registered new interface driver usb-storage
[   11.209648] USB Mass Storage support registered.
[   11.265696] usbcore: registered new interface driver libusual
[   11.335071] usbcore: registered new interface driver cypress_cy7c63
[   11.410772] i8042.c: No controller found.
[   11.459066] mice: PS/2 mouse device common for all mice
[   11.523064] usbcore: registered new interface driver usbhid
[   11.589463] drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver
[   11.664712] TCP cubic registered
[   11.702904] NET: Registered protocol family 1
[   11.755062] NET: Registered protocol family 17
[   12.313654] IP-Config: No network devices available.
[   12.374243] RAMDISK: Compressed image found at block 0
[   19.569218] EXT2-fs warning: mounting unchecked fs, running e2fsck is
recommended
[   19.658681] VFS: Mounted root (ext2 filesystem).
[   19.714175] Freeing unused kernel memory: 116k init
INIT: version 2.78 booting
Activating swap...
mount: you must specify the filesystem type
Mounting local filesystems...
nothing was mounted
Starting portmap daemon\: portmap.
INIT: Entering runlevel: 3

and when I plug in my USB drive I get this...


# [   72.112234] usb 1-1: new full speed USB device using c67x00 and address
2
[   72.402860] usb 1-1: configuration #1 chosen from 1 choice
[   72.474140] scsi0 : SCSI emulation for USB Mass Storage devices
[   72.551588] usb 1-1: Product: DiskOnKey
[   72.596938] usb 1-1: Manufacturer: M-Systems
[   72.647914] usb 1-1: SerialNumber: 021120102300F3EA
[   77.554538] scsi 0:0:0:0: Direct-Access     M-Sys    DiskOnKey
2.51 PQ: 0 ANSI: 0 CCS
[   77.688344] sd 0:0:0:0: [sda] 15584 512-byte hardware sectors (8 MB)
[   77.770266] sd 0:0:0:0: [sda] Write Protect is off
[   77.827242] sd 0:0:0:0: [sda] Assuming drive cache: write through
[   77.919287] sd 0:0:0:0: [sda] 15584 512-byte hardware sectors (8 MB)
[   78.001280] sd 0:0:0:0: [sda] Write Protect is off
[   78.058131] sd 0:0:0:0: [sda] Assuming drive cache: write through
[   78.131034]  sda:<7>usb-storage: queuecommand called
[   78.201342]  sda1
[   78.230344] sd 0:0:0:0: [sda] Attached SCSI removable disk
[   78.298014] sd 0:0:0:0: Attached scsi generic sg0 type 0

ls /dev/sd*
ls: /dev/sd*: No such file or directory

***the dmesg output is this...
 dmesg
_bulk_transfer_buf: xfer 31 bytes
[   77.902642] usb-storage: Status code 0; transferred 31/31
[   77.902722] usb-storage: -- transfer complete
[   77.902788] usb-storage: Bulk command transfer result=0
[   77.902858] usb-storage: Attempting to get CSW...
[   77.902933] usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
[   77.904635] usb-storage: Status code 0; transferred 13/13
[   77.904716] usb-storage: -- transfer complete
[   77.904781] usb-storage: Bulk status result = 0
[   77.904861] usb-storage: Bulk Status S 0x53425355 T 0x7 R 0 Stat 0x0
[   77.904951] usb-storage: scsi cmd done, result=0x0
[   77.905044] usb-storage: *** thread sleeping.
[   77.905327] usb-storage: queuecommand called
[   77.905471] usb-storage: *** thread awakened.
[   77.905563] usb-storage: Command ALLOW_MEDIUM_REMOVAL (6 bytes)
[   77.905635] usb-storage:  1e 00 00 00 01 00
[   77.905777] usb-storage: Bulk Command S 0x43425355 T 0x8 L 0 F 0 Trg 0
LUN 0 CL 6
[   77.905875] usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
[   77.906641] usb-storage: Status code 0; transferred 31/31
[   77.906721] usb-storage: -- transfer complete
[   77.906787] usb-storage: Bulk command transfer result=0
[   77.906857] usb-storage: Attempting to get CSW...
[   77.906931] usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
[   77.908636] usb-storage: Status code 0; transferred 13/13
[   77.908716] usb-storage: -- transfer complete
[   77.908781] usb-storage: Bulk status result = 0
[   77.908861] usb-storage: Bulk Status S 0x53425355 T 0x8 R 0 Stat 0x0
[   77.908950] usb-storage: scsi cmd done, result=0x0
[   77.909042] usb-storage: *** thread sleeping.
[   77.909362] usb-storage: queuecommand called
[   77.909511] usb-storage: *** thread awakened.
[   77.909602] usb-storage: Command TEST_UNIT_READY (6 bytes)
[   77.909669] usb-storage:  00 00 00 00 00 00
[   77.909811] usb-storage: Bulk Command S 0x43425355 T 0x9 L 0 F 0 Trg 0
LUN 0 CL 6
[   77.909909] usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
[   77.910642] usb-storage: Status code 0; transferred 31/31
[   77.910722] usb-storage: -- transfer complete
[   77.910788] usb-storage: Bulk command transfer result=0
[   77.910857] usb-storage: Attempting to get CSW...
[   77.910932] usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
[   77.912635] usb-storage: Status code 0; transferred 13/13
[   77.912716] usb-storage: -- transfer complete
[   77.912781] usb-storage: Bulk status result = 0
[   77.912861] usb-storage: Bulk Status S 0x53425355 T 0x9 R 0 Stat 0x0
[   77.912950] usb-storage: scsi cmd done, result=0x0
[   77.913042] usb-storage: *** thread sleeping.
[   77.913355] usb-storage: queuecommand called
[   77.913502] usb-storage: *** thread awakened.
[   77.913593] usb-storage: Command READ_CAPACITY (10 bytes)
[   77.913661] usb-storage:  25 00 00 00 00 00 00 00 00 00
[   77.913843] usb-storage: Bulk Command S 0x43425355 T 0xa L 8 F 128 Trg 0
LUN 0 CL 10
[   77.913943] usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
[   77.914642] usb-storage: Status code 0; transferred 31/31
[   77.914722] usb-storage: -- transfer complete
[   77.914788] usb-storage: Bulk command transfer result=0
[   77.914875] usb-storage: usb_stor_bulk_transfer_sglist: xfer 8 bytes, 1
entries
[   77.916638] usb-storage: Status code 0; transferred 8/8
[   77.916719] usb-storage: -- transfer complete
[   77.916786] usb-storage: Bulk data transfer result 0x0
[   77.916854] usb-storage: Attempting to get CSW...
[   77.916929] usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
[   77.918633] usb-storage: Status code 0; transferred 13/13
[   77.918712] usb-storage: -- transfer complete
[   77.918777] usb-storage: Bulk status result = 0
[   77.918857] usb-storage: Bulk Status S 0x53425355 T 0xa R 0 Stat 0x0
[   77.918946] usb-storage: scsi cmd done, result=0x0
[   77.919037] usb-storage: *** thread sleeping.
[   77.919287] sd 0:0:0:0: [sda] 15584 512-byte hardware sectors (8 MB)
[   77.995005] usb-storage: queuecommand called
[   77.995155] usb-storage: *** thread awakened.
[   77.995246] usb-storage: Command MODE_SENSE (6 bytes)
[   77.995310] usb-storage:  1a 00 3f 00 c0 00
[   77.995456] usb-storage: Bulk Command S 0x43425355 T 0xb L 192 F 128 Trg
0 LUN 0 CL 6
[   77.995557] usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
[   77.996652] usb-storage: Status code 0; transferred 31/31
[   77.996734] usb-storage: -- transfer complete
[   77.996799] usb-storage: Bulk command transfer result=0
[   77.996887] usb-storage: usb_stor_bulk_transfer_sglist: xfer 192 bytes, 1
entries
[   77.998650] usb-storage: Status code -121; transferred 8/192
[   77.998733] usb-storage: -- short read transfer
[   77.998803] usb-storage: Bulk data transfer result 0x1
[   77.998871] usb-storage: Attempting to get CSW...
[   77.998946] usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
[   78.000644] usb-storage: Status code 0; transferred 13/13
[   78.000723] usb-storage: -- transfer complete
[   78.000787] usb-storage: Bulk status result = 0
[   78.000867] usb-storage: Bulk Status S 0x53425355 T 0xb R 184 Stat 0x0
[   78.000958] usb-storage: scsi cmd done, result=0x0
[   78.001049] usb-storage: *** thread sleeping.
[   78.001280] sd 0:0:0:0: [sda] Write Protect is off
[   78.058047] sd 0:0:0:0: [sda] Mode Sense: 45 00 00 08
[   78.058131] sd 0:0:0:0: [sda] Assuming drive cache: write through
[   78.131034]  sda:<7>usb-storage: queuecommand called
[   78.190334] usb-storage: *** thread awakened.
[   78.190437] usb-storage: Command READ_10 (10 bytes)
[   78.190500] usb-storage:  28 00 00 00 00 00 00 00 08 00
[   78.190687] usb-storage: Bulk Command S 0x43425355 T 0xc L 4096 F 128 Trg
0 LUN 0 CL 10
[   78.190789] usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
[   78.191664] usb-storage: Status code 0; transferred 31/31
[   78.191744] usb-storage: -- transfer complete
[   78.191810] usb-storage: Bulk command transfer result=0
[   78.191898] usb-storage: usb_stor_bulk_transfer_sglist: xfer 4096 bytes,
1 entries
[   78.199333] usb-storage: Status code 0; transferred 4096/4096
[   78.199419] usb-storage: -- transfer complete
[   78.199486] usb-storage: Bulk data transfer result 0x0
[   78.199555] usb-storage: Attempting to get CSW...
[   78.199630] usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
[   78.200658] usb-storage: Status code 0; transferred 13/13
[   78.200739] usb-storage: -- transfer complete
[   78.200804] usb-storage: Bulk status result = 0
[   78.200884] usb-storage: Bulk Status S 0x53425355 T 0xc R 0 Stat 0x0
[   78.200974] usb-storage: scsi cmd done, result=0x0
[   78.201068] usb-storage: *** thread sleeping.
[   78.201342]  sda1
[   78.224012] usb-storage: queuecommand called
[   78.224231] usb-storage: *** thread awakened.
[   78.224328] usb-storage: Command ALLOW_MEDIUM_REMOVAL (6 bytes)
[   78.224400] usb-storage:  1e 00 00 00 00 00
[   78.224544] usb-storage: Bulk Command S 0x43425355 T 0xd L 0 F 0 Trg 0
LUN 0 CL 6
[   78.224642] usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
[   78.225666] usb-storage: Status code 0; transferred 31/31
[   78.225746] usb-storage: -- transfer complete
[   78.225812] usb-storage: Bulk command transfer result=0
[   78.225882] usb-storage: Attempting to get CSW...
[   78.225956] usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
[   78.227656] usb-storage: Status code 0; transferred 13/13
[   78.227735] usb-storage: -- transfer complete
[   78.227800] usb-storage: Bulk status result = 0
[   78.227880] usb-storage: Bulk Status S 0x53425355 T 0xd R 0 Stat 0x0
[   78.227969] usb-storage: scsi cmd done, result=0x0
[   78.228172] usb-storage: *** thread sleeping.
[   78.230344] sd 0:0:0:0: [sda] Attached SCSI removable disk
[   78.298014] sd 0:0:0:0: Attached scsi generic sg0 type 0

I feel like I might be missing something in my config file but I'm not
positive?  Any ideas?

-Thanks
-Sam



On Wed, Apr 23, 2008 at 9:41 AM, Henrik Larson <henka@henka.dyndns.org>
wrote:

>
> Allt som har med skatter är per definition inte logiskt!
>
>
>
>
> On Wed, 23 Apr 2008, Peter Korsgaard wrote:
>
>    "Aaron" == Aaron Sells <aaron.sells@zin-tech.com> writes:
> > > > > > >
> > > > > >
> > Hi,
> >
> > Aaron> root@xilinx-ml403:/# dmesg | grep -i usb
> > Aaron> [    0.175963] usbcore: registered new interface driver usbfs
> > Aaron> [    0.178207] usbcore: registered new interface driver hub
> > Aaron> [    0.179810] usbcore: registered new device driver usb
> > Aaron> [    3.426016] usbcore: registered new interface driver ub
> > Aaron> [    4.156086] usbmon: debugfs is not available
> > Aaron> [    4.209160] Initializing USB Mass Storage driver...
> > Aaron> [    4.268302] usbcore: registered new interface driver
> > usb-storage
> > Aaron> [    4.336109] USB Mass Storage support registered.
> > Aaron> [    4.958294] usbcore: registered new interface driver usbhid
> > Aaron> [    5.020120] drivers/hid/usbhid/hid-core.c: v2.6:USB HID core
> > driver
> >
> > Yes, the USB core and drivers gets loaded, but because you haven't
> > provided a struct platform_device the c67x00 driver doesn't get
> > probed.
> >
> > Aaron> It still doesn't look like the ML403 Cypress host device is being
> > Aaron> recognized.  No messages appear upon insertion and removal of USB
> > Aaron> devices.
> >
> > Aaron> Regards,
> > Aaron> Aaron Sells
> > Aaron> diff linux-2.6-xlnx_arch-ppc-syslib-virtex_devices.c
> > secretlab_arch-ppc-syslib-virtex_devices.c
> > Aaron> 77,92d76
> > Aaron> <  * ML300/ML403 Video Device: shortcut macro for single instance
> >
> > Please use diff -u.
> >
> > I don't see anything with platform devices for the c67x00 driver. You
> > need something like:
> >
> > #include <linux/usb/c67x00.h>
> >
> > static struct resource c67x00_resources[] = {
> >        [0] = {
> >                .start  = 0x84000000,
> >                .end    = 0x8400000f,
> >                .flags  = IORESOURCE_MEM,
> >        },
> >        [1] = {
> >                .start  = 3,
> >                .end    = 3,
> >                .flags  = IORESOURCE_IRQ,
> >        },
> > };
> >
> > static struct c67x00_platform_data thinlite_c67x00_data = {
> >        .sie_config             = C67X00_SIE1_HOST |
> > C67X00_SIE2_PERIPHERAL_B,
> >        .hpi_regstep            = 0x02, /* A0 not connected on 16bit bus
> > */
> > };
> >
> > static struct platform_device thinlite_c67x00 = {
> >        .name                   = "c67x00",
> >        .id                     = 0,
> >        .num_resources          = ARRAY_SIZE(c67x00_resources),
> >        .resource               = c67x00_resources,
> >        .dev.platform_data      = &thinlite_c67x00_data,
> > };
> >
> > Which you then register with the platform bus with
> > platform_add_devices or similar. Either you do this by hand or you
> > create XPAR_* macros which take the needed info out of xparameter.h
> > (sorry, I don't have an xparameters.h with those defines at hand).
> >
> > Aaron> diff -Naur c67x00.old/c67x00-drv.c c67x00/c67x00-drv.c
> > Aaron> --- c67x00.old/c67x00-drv.c      2008-04-23 10:36:16.000000000
> > -0400
> > Aaron> +++ c67x00/c67x00-drv.c  2008-04-23 10:39:20.000000000 -0400
> > Aaron> @@ -57,8 +57,7 @@
> > Aaron>                  c67x00_hcd_probe(sie);
> > Aaron>                  break;
> >
> > Aaron> -        case C67X00_SIE_PERIPHERAL_A:
> > Aaron> -        case C67X00_SIE_PERIPHERAL_B:
> > Aaron> +        case C67X00_SIE_PERIPHERAL:
> >
> > This seems to be from an earlier version of my driver.
> >
> > --
> > Bye, Peter Korsgaard
> > _______________________________________________
> > Linuxppc-embedded mailing list
> > Linuxppc-embedded@ozlabs.org
> > https://ozlabs.org/mailman/listinfo/linuxppc-embedded
> >
> > _______________________________________________
> Linuxppc-embedded mailing list
> Linuxppc-embedded@ozlabs.org
> https://ozlabs.org/mailman/listinfo/linuxppc-embedded
>

[-- Attachment #2: .config --]
[-- Type: text/plain, Size: 18679 bytes --]

#
# Automatically generated make config: don't edit
# Linux kernel version: 2.6.24.4
# Wed Apr 23 07:54:55 2008
#
CONFIG_WORD_SIZE=32
CONFIG_MMU=y
CONFIG_GENERIC_HARDIRQS=y
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
CONFIG_ARCH_HAS_ILOG2_U32=y
# CONFIG_ARCH_HAS_ILOG2_U64 is not set
CONFIG_GENERIC_HWEIGHT=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
CONFIG_PPC=y
CONFIG_PPC32=y
CONFIG_GENERIC_NVRAM=y
CONFIG_GENERIC_FIND_NEXT_BIT=y
CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
CONFIG_ARCH_MAY_HAVE_PC_FDC=y
CONFIG_GENERIC_BUG=y
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"

#
# General setup
#
CONFIG_EXPERIMENTAL=y
CONFIG_BROKEN_ON_SMP=y
CONFIG_INIT_ENV_ARG_LIMIT=32
CONFIG_LOCALVERSION=""
CONFIG_LOCALVERSION_AUTO=y
# CONFIG_SWAP is not set
CONFIG_SYSVIPC=y
CONFIG_SYSVIPC_SYSCTL=y
# CONFIG_POSIX_MQUEUE is not set
CONFIG_BSD_PROCESS_ACCT=y
CONFIG_BSD_PROCESS_ACCT_V3=y
# CONFIG_TASKSTATS is not set
# CONFIG_USER_NS is not set
# CONFIG_PID_NS is not set
# CONFIG_AUDIT is not set
# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=14
# CONFIG_CGROUPS is not set
CONFIG_FAIR_GROUP_SCHED=y
CONFIG_FAIR_USER_SCHED=y
# CONFIG_FAIR_CGROUP_SCHED is not set
CONFIG_SYSFS_DEPRECATED=y
# CONFIG_RELAY is not set
CONFIG_BLK_DEV_INITRD=y
CONFIG_INITRAMFS_SOURCE=""
CONFIG_CC_OPTIMIZE_FOR_SIZE=y
CONFIG_SYSCTL=y
# CONFIG_EMBEDDED is not set
CONFIG_SYSCTL_SYSCALL=y
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_ALL is not set
# CONFIG_KALLSYMS_EXTRA_PASS is not set
CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_ANON_INODES=y
CONFIG_EPOLL=y
CONFIG_SIGNALFD=y
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
CONFIG_VM_EVENT_COUNTERS=y
CONFIG_SLAB=y
# CONFIG_SLUB is not set
# CONFIG_SLOB is not set
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
# CONFIG_MODULES is not set
CONFIG_BLOCK=y
CONFIG_LBD=y
# CONFIG_BLK_DEV_IO_TRACE is not set
# CONFIG_LSF is not set
# CONFIG_BLK_DEV_BSG is not set

#
# IO Schedulers
#
CONFIG_IOSCHED_NOOP=y
CONFIG_IOSCHED_AS=y
CONFIG_IOSCHED_DEADLINE=y
CONFIG_IOSCHED_CFQ=y
CONFIG_DEFAULT_AS=y
# CONFIG_DEFAULT_DEADLINE is not set
# CONFIG_DEFAULT_CFQ is not set
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="anticipatory"

#
# Processor
#
# CONFIG_6xx is not set
CONFIG_40x=y
# CONFIG_44x is not set
# CONFIG_8xx is not set
# CONFIG_E200 is not set
# CONFIG_E500 is not set
CONFIG_PPC_DCR_NATIVE=y
CONFIG_PPC_DCR=y
CONFIG_MATH_EMULATION=y
# CONFIG_KEXEC is not set
# CONFIG_CPU_FREQ is not set
CONFIG_4xx=y
# CONFIG_WANT_EARLY_SERIAL is not set

#
# IBM 4xx options
#
# CONFIG_BUBINGA is not set
# CONFIG_CPCI405 is not set
# CONFIG_EP405 is not set
# CONFIG_REDWOOD_5 is not set
# CONFIG_REDWOOD_6 is not set
# CONFIG_SYCAMORE is not set
# CONFIG_WALNUT is not set
# CONFIG_XILINX_ML300 is not set
CONFIG_XILINX_ML403=y
CONFIG_IBM405_ERR77=y
CONFIG_IBM405_ERR51=y
CONFIG_XILINX_VIRTEX_4_FX=y
CONFIG_XILINX_VIRTEX=y
CONFIG_EMBEDDEDBOOT=y
# CONFIG_PPC4xx_DMA is not set
CONFIG_PPC_GEN550=y
CONFIG_UART0_TTYS0=y
# CONFIG_UART0_TTYS1 is not set
CONFIG_NOT_COHERENT_CACHE=y

#
# Platform options
#
# CONFIG_PC_KEYBOARD is not set
# CONFIG_HIGHMEM is not set
CONFIG_ARCH_POPULATES_NODE_MAP=y
# CONFIG_HZ_100 is not set
CONFIG_HZ_250=y
# CONFIG_HZ_300 is not set
# CONFIG_HZ_1000 is not set
CONFIG_HZ=250
CONFIG_PREEMPT_NONE=y
# CONFIG_PREEMPT_VOLUNTARY is not set
# CONFIG_PREEMPT is not set
CONFIG_SELECT_MEMORY_MODEL=y
CONFIG_FLATMEM_MANUAL=y
# CONFIG_DISCONTIGMEM_MANUAL is not set
# CONFIG_SPARSEMEM_MANUAL is not set
CONFIG_FLATMEM=y
CONFIG_FLAT_NODE_MEM_MAP=y
# CONFIG_SPARSEMEM_STATIC is not set
# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
CONFIG_SPLIT_PTLOCK_CPUS=4
# CONFIG_RESOURCES_64BIT is not set
CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
CONFIG_BINFMT_ELF=y
# CONFIG_BINFMT_MISC is not set
CONFIG_CMDLINE_BOOL=y
CONFIG_CMDLINE="console=ttyS0,9600 ip=on root=/dev/ram rw"
CONFIG_SECCOMP=y
CONFIG_ISA_DMA_API=y

#
# Bus options
#
CONFIG_ZONE_DMA=y
# CONFIG_PPC_I8259 is not set
# CONFIG_PCI is not set
# CONFIG_PCI_DOMAINS is not set
# CONFIG_PCI_SYSCALL is not set
# CONFIG_ARCH_SUPPORTS_MSI is not set
# CONFIG_PCCARD is not set

#
# Advanced setup
#
# CONFIG_ADVANCED_OPTIONS is not set

#
# Default settings for advanced configuration options are used
#
CONFIG_HIGHMEM_START=0xfe000000
CONFIG_LOWMEM_SIZE=0x30000000
CONFIG_KERNEL_START=0xc0000000
CONFIG_TASK_SIZE=0x80000000
CONFIG_CONSISTENT_START=0xff100000
CONFIG_CONSISTENT_SIZE=0x00200000
CONFIG_BOOT_LOAD=0x00400000

#
# Networking
#
CONFIG_NET=y

#
# Networking options
#
CONFIG_PACKET=y
CONFIG_PACKET_MMAP=y
CONFIG_UNIX=y
CONFIG_XFRM=y
# CONFIG_XFRM_USER is not set
# CONFIG_XFRM_SUB_POLICY is not set
# CONFIG_XFRM_MIGRATE is not set
# CONFIG_NET_KEY is not set
CONFIG_INET=y
# CONFIG_IP_MULTICAST is not set
# CONFIG_IP_ADVANCED_ROUTER is not set
CONFIG_IP_FIB_HASH=y
CONFIG_IP_PNP=y
CONFIG_IP_PNP_DHCP=y
# CONFIG_IP_PNP_BOOTP is not set
# CONFIG_IP_PNP_RARP is not set
# CONFIG_NET_IPIP is not set
# CONFIG_NET_IPGRE is not set
# CONFIG_ARPD is not set
# CONFIG_SYN_COOKIES is not set
# CONFIG_INET_AH is not set
# CONFIG_INET_ESP is not set
# CONFIG_INET_IPCOMP is not set
# CONFIG_INET_XFRM_TUNNEL is not set
# CONFIG_INET_TUNNEL is not set
CONFIG_INET_XFRM_MODE_TRANSPORT=y
CONFIG_INET_XFRM_MODE_TUNNEL=y
CONFIG_INET_XFRM_MODE_BEET=y
# CONFIG_INET_LRO is not set
CONFIG_INET_DIAG=y
CONFIG_INET_TCP_DIAG=y
# CONFIG_TCP_CONG_ADVANCED is not set
CONFIG_TCP_CONG_CUBIC=y
CONFIG_DEFAULT_TCP_CONG="cubic"
# CONFIG_TCP_MD5SIG is not set
# CONFIG_IPV6 is not set
# CONFIG_INET6_XFRM_TUNNEL is not set
# CONFIG_INET6_TUNNEL is not set
# CONFIG_NETWORK_SECMARK is not set
# CONFIG_NETFILTER is not set
# CONFIG_IP_DCCP is not set
# CONFIG_IP_SCTP is not set
# CONFIG_TIPC is not set
# CONFIG_ATM is not set
# CONFIG_BRIDGE is not set
# CONFIG_VLAN_8021Q is not set
# CONFIG_DECNET is not set
# CONFIG_LLC2 is not set
# CONFIG_IPX is not set
# CONFIG_ATALK is not set
# CONFIG_X25 is not set
# CONFIG_LAPB is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
# CONFIG_NET_SCHED is not set

#
# Network testing
#
# CONFIG_NET_PKTGEN is not set
# CONFIG_HAMRADIO is not set
# CONFIG_IRDA is not set
# CONFIG_BT is not set
# CONFIG_AF_RXRPC is not set

#
# Wireless
#
# CONFIG_CFG80211 is not set
# CONFIG_WIRELESS_EXT is not set
# CONFIG_MAC80211 is not set
# CONFIG_IEEE80211 is not set
# CONFIG_RFKILL is not set
# CONFIG_NET_9P is not set

#
# Device Drivers
#

#
# Generic Driver Options
#
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
# CONFIG_FW_LOADER is not set
# CONFIG_DEBUG_DRIVER is not set
# CONFIG_DEBUG_DEVRES is not set
# CONFIG_SYS_HYPERVISOR is not set
# CONFIG_CONNECTOR is not set
# CONFIG_MTD is not set
# CONFIG_PARPORT is not set
CONFIG_BLK_DEV=y
# CONFIG_BLK_DEV_FD is not set
# CONFIG_BLK_DEV_COW_COMMON is not set
# CONFIG_BLK_DEV_LOOP is not set
# CONFIG_BLK_DEV_NBD is not set
CONFIG_BLK_DEV_UB=y
CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_COUNT=16
CONFIG_BLK_DEV_RAM_SIZE=65536
CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
# CONFIG_CDROM_PKTCDVD is not set
# CONFIG_ATA_OVER_ETH is not set
# CONFIG_XILINX_SYSACE is not set
CONFIG_MISC_DEVICES=y
# CONFIG_EEPROM_93CX6 is not set
# CONFIG_IDE is not set

#
# SCSI device support
#
CONFIG_RAID_ATTRS=y
CONFIG_SCSI=y
CONFIG_SCSI_DMA=y
CONFIG_SCSI_TGT=y
# CONFIG_SCSI_NETLINK is not set
CONFIG_SCSI_PROC_FS=y

#
# SCSI support type (disk, tape, CD-ROM)
#
CONFIG_BLK_DEV_SD=y
CONFIG_CHR_DEV_ST=y
CONFIG_CHR_DEV_OSST=y
CONFIG_BLK_DEV_SR=y
CONFIG_BLK_DEV_SR_VENDOR=y
CONFIG_CHR_DEV_SG=y
CONFIG_CHR_DEV_SCH=y

#
# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
#
CONFIG_SCSI_MULTI_LUN=y
CONFIG_SCSI_CONSTANTS=y
CONFIG_SCSI_LOGGING=y
CONFIG_SCSI_SCAN_ASYNC=y

#
# SCSI Transports
#
# CONFIG_SCSI_SPI_ATTRS is not set
# CONFIG_SCSI_FC_ATTRS is not set
# CONFIG_SCSI_ISCSI_ATTRS is not set
# CONFIG_SCSI_SAS_LIBSAS is not set
# CONFIG_SCSI_SRP_ATTRS is not set
CONFIG_SCSI_LOWLEVEL=y
# CONFIG_ISCSI_TCP is not set
# CONFIG_SCSI_DEBUG is not set
# CONFIG_ATA is not set
# CONFIG_MD is not set
# CONFIG_MACINTOSH_DRIVERS is not set
CONFIG_NETDEVICES=y
# CONFIG_NETDEVICES_MULTIQUEUE is not set
# CONFIG_DUMMY is not set
# CONFIG_BONDING is not set
# CONFIG_MACVLAN is not set
# CONFIG_EQUALIZER is not set
CONFIG_TUN=y
# CONFIG_VETH is not set
# CONFIG_NET_ETHERNET is not set
CONFIG_NETDEV_1000=y
CONFIG_NETDEV_10000=y

#
# Wireless LAN
#
# CONFIG_WLAN_PRE80211 is not set
# CONFIG_WLAN_80211 is not set

#
# USB Network Adapters
#
# CONFIG_USB_CATC is not set
# CONFIG_USB_KAWETH is not set
# CONFIG_USB_PEGASUS is not set
# CONFIG_USB_RTL8150 is not set
# CONFIG_USB_USBNET is not set
# CONFIG_WAN is not set
# CONFIG_PPP is not set
# CONFIG_SLIP is not set
# CONFIG_SHAPER is not set
# CONFIG_NETCONSOLE is not set
# CONFIG_NETPOLL is not set
# CONFIG_NET_POLL_CONTROLLER is not set
# CONFIG_ISDN is not set
# CONFIG_PHONE is not set

#
# Input device support
#
CONFIG_INPUT=y
# CONFIG_INPUT_FF_MEMLESS is not set
# CONFIG_INPUT_POLLDEV is not set

#
# Userland interfaces
#
CONFIG_INPUT_MOUSEDEV=y
# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
# CONFIG_INPUT_JOYDEV is not set
CONFIG_INPUT_EVDEV=y
# CONFIG_INPUT_EVBUG is not set

#
# Input Device Drivers
#
CONFIG_INPUT_KEYBOARD=y
CONFIG_KEYBOARD_ATKBD=y
# CONFIG_KEYBOARD_SUNKBD is not set
# CONFIG_KEYBOARD_LKKBD is not set
# CONFIG_KEYBOARD_XTKBD is not set
# CONFIG_KEYBOARD_NEWTON is not set
# CONFIG_KEYBOARD_STOWAWAY is not set
# CONFIG_INPUT_MOUSE is not set
# CONFIG_INPUT_JOYSTICK is not set
# CONFIG_INPUT_TABLET is not set
# CONFIG_INPUT_TOUCHSCREEN is not set
# CONFIG_INPUT_MISC is not set

#
# Hardware I/O ports
#
CONFIG_SERIO=y
CONFIG_SERIO_I8042=y
CONFIG_SERIO_SERPORT=y
CONFIG_SERIO_LIBPS2=y
# CONFIG_SERIO_RAW is not set
# CONFIG_GAMEPORT is not set

#
# Character devices
#
CONFIG_VT=y
CONFIG_VT_CONSOLE=y
CONFIG_HW_CONSOLE=y
# CONFIG_VT_HW_CONSOLE_BINDING is not set
# CONFIG_SERIAL_NONSTANDARD is not set

#
# Serial drivers
#
CONFIG_SERIAL_8250=y
CONFIG_SERIAL_8250_CONSOLE=y
CONFIG_SERIAL_8250_NR_UARTS=4
CONFIG_SERIAL_8250_RUNTIME_UARTS=4
# CONFIG_SERIAL_8250_EXTENDED is not set

#
# Non-8250 serial port support
#
# CONFIG_SERIAL_UARTLITE is not set
CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y
CONFIG_UNIX98_PTYS=y
# CONFIG_LEGACY_PTYS is not set
# CONFIG_IPMI_HANDLER is not set
CONFIG_HW_RANDOM=y
# CONFIG_NVRAM is not set
# CONFIG_GEN_RTC is not set
# CONFIG_R3964 is not set
# CONFIG_RAW_DRIVER is not set
# CONFIG_TCG_TPM is not set
# CONFIG_I2C is not set

#
# SPI support
#
# CONFIG_SPI is not set
# CONFIG_SPI_MASTER is not set
# CONFIG_W1 is not set
# CONFIG_POWER_SUPPLY is not set
# CONFIG_HWMON is not set
# CONFIG_WATCHDOG is not set

#
# Sonics Silicon Backplane
#
CONFIG_SSB_POSSIBLE=y
# CONFIG_SSB is not set

#
# Multifunction device drivers
#
# CONFIG_MFD_SM501 is not set

#
# Multimedia devices
#
# CONFIG_VIDEO_DEV is not set
# CONFIG_DVB_CORE is not set
CONFIG_DAB=y
# CONFIG_USB_DABUSB is not set

#
# Graphics support
#
# CONFIG_VGASTATE is not set
# CONFIG_VIDEO_OUTPUT_CONTROL is not set
# CONFIG_FB is not set
# CONFIG_BACKLIGHT_LCD_SUPPORT is not set

#
# Display device support
#
# CONFIG_DISPLAY_SUPPORT is not set

#
# Console display driver support
#
CONFIG_DUMMY_CONSOLE=y

#
# Sound
#
# CONFIG_SOUND is not set
CONFIG_HID_SUPPORT=y
CONFIG_HID=y
CONFIG_HID_DEBUG=y
# CONFIG_HIDRAW is not set

#
# USB Input Devices
#
CONFIG_USB_HID=y
# CONFIG_USB_HIDINPUT_POWERBOOK is not set
# CONFIG_HID_FF is not set
# CONFIG_USB_HIDDEV is not set
CONFIG_USB_SUPPORT=y
CONFIG_USB_ARCH_HAS_HCD=y
# CONFIG_USB_ARCH_HAS_OHCI is not set
# CONFIG_USB_ARCH_HAS_EHCI is not set
CONFIG_USB=y
CONFIG_USB_DEBUG=y

#
# Miscellaneous USB options
#
CONFIG_USB_DEVICEFS=y
CONFIG_USB_DEVICE_CLASS=y
CONFIG_USB_DYNAMIC_MINORS=y
# CONFIG_USB_OTG is not set

#
# USB Host Controller Drivers
#
# CONFIG_USB_ISP116X_HCD is not set
# CONFIG_USB_SL811_HCD is not set
# CONFIG_USB_R8A66597_HCD is not set
CONFIG_USB_C67X00_DRV=y
CONFIG_USB_C67X00_HCD=y

#
# USB Device Class drivers
#
# CONFIG_USB_ACM is not set
CONFIG_USB_PRINTER=y

#
# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
#

#
# may also be needed; see USB_STORAGE Help for more information
#
CONFIG_USB_STORAGE=y
CONFIG_USB_STORAGE_DEBUG=y
# CONFIG_USB_STORAGE_DATAFAB is not set
# CONFIG_USB_STORAGE_FREECOM is not set
# CONFIG_USB_STORAGE_ISD200 is not set
# CONFIG_USB_STORAGE_DPCM is not set
# CONFIG_USB_STORAGE_USBAT is not set
# CONFIG_USB_STORAGE_SDDR09 is not set
# CONFIG_USB_STORAGE_SDDR55 is not set
# CONFIG_USB_STORAGE_JUMPSHOT is not set
# CONFIG_USB_STORAGE_ALAUDA is not set
# CONFIG_USB_STORAGE_ONETOUCH is not set
# CONFIG_USB_STORAGE_KARMA is not set
CONFIG_USB_LIBUSUAL=y

#
# USB Imaging devices
#
# CONFIG_USB_MDC800 is not set
# CONFIG_USB_MICROTEK is not set
# CONFIG_USB_MON is not set

#
# USB port drivers
#

#
# USB Serial Converter support
#
# CONFIG_USB_SERIAL is not set

#
# USB Miscellaneous drivers
#
# CONFIG_USB_EMI62 is not set
# CONFIG_USB_EMI26 is not set
# CONFIG_USB_ADUTUX is not set
# CONFIG_USB_AUERSWALD is not set
# CONFIG_USB_RIO500 is not set
# CONFIG_USB_LEGOTOWER is not set
# CONFIG_USB_LCD is not set
# CONFIG_USB_BERRY_CHARGE is not set
# CONFIG_USB_LED is not set
CONFIG_USB_CYPRESS_CY7C63=y
# CONFIG_USB_CYTHERM is not set
# CONFIG_USB_PHIDGET is not set
# CONFIG_USB_IDMOUSE is not set
# CONFIG_USB_FTDI_ELAN is not set
# CONFIG_USB_APPLEDISPLAY is not set
# CONFIG_USB_LD is not set
# CONFIG_USB_TRANCEVIBRATOR is not set
# CONFIG_USB_IOWARRIOR is not set
# CONFIG_USB_TEST is not set

#
# USB DSL modem support
#

#
# USB Gadget Support
#
# CONFIG_USB_GADGET is not set
# CONFIG_MMC is not set
# CONFIG_NEW_LEDS is not set
# CONFIG_EDAC is not set
# CONFIG_RTC_CLASS is not set

#
# Userspace I/O
#
# CONFIG_UIO is not set

#
# File systems
#
CONFIG_EXT2_FS=y
CONFIG_EXT2_FS_XATTR=y
CONFIG_EXT2_FS_POSIX_ACL=y
CONFIG_EXT2_FS_SECURITY=y
CONFIG_EXT2_FS_XIP=y
CONFIG_FS_XIP=y
# CONFIG_EXT3_FS is not set
# CONFIG_EXT4DEV_FS is not set
CONFIG_FS_MBCACHE=y
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
CONFIG_FS_POSIX_ACL=y
# CONFIG_XFS_FS is not set
# CONFIG_GFS2_FS is not set
# CONFIG_OCFS2_FS is not set
# CONFIG_MINIX_FS is not set
# CONFIG_ROMFS_FS is not set
CONFIG_INOTIFY=y
CONFIG_INOTIFY_USER=y
# CONFIG_QUOTA is not set
CONFIG_DNOTIFY=y
CONFIG_AUTOFS_FS=y
CONFIG_AUTOFS4_FS=y
# CONFIG_FUSE_FS is not set

#
# CD-ROM/DVD Filesystems
#
# CONFIG_ISO9660_FS is not set
# CONFIG_UDF_FS is not set

#
# DOS/FAT/NT Filesystems
#
CONFIG_FAT_FS=y
CONFIG_MSDOS_FS=y
CONFIG_VFAT_FS=y
CONFIG_FAT_DEFAULT_CODEPAGE=437
CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
CONFIG_NTFS_FS=y
CONFIG_NTFS_DEBUG=y
CONFIG_NTFS_RW=y

#
# Pseudo filesystems
#
CONFIG_PROC_FS=y
CONFIG_PROC_KCORE=y
CONFIG_PROC_SYSCTL=y
CONFIG_SYSFS=y
CONFIG_TMPFS=y
# CONFIG_TMPFS_POSIX_ACL is not set
# CONFIG_HUGETLB_PAGE is not set
# CONFIG_CONFIGFS_FS is not set

#
# Miscellaneous filesystems
#
# CONFIG_ADFS_FS is not set
# CONFIG_AFFS_FS is not set
# CONFIG_HFS_FS is not set
# CONFIG_HFSPLUS_FS is not set
# CONFIG_BEFS_FS is not set
# CONFIG_BFS_FS is not set
# CONFIG_EFS_FS is not set
# CONFIG_CRAMFS is not set
# CONFIG_VXFS_FS is not set
# CONFIG_HPFS_FS is not set
# CONFIG_QNX4FS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
CONFIG_NETWORK_FILESYSTEMS=y
# CONFIG_NFS_FS is not set
# CONFIG_NFSD is not set
# CONFIG_SMB_FS is not set
# CONFIG_CIFS is not set
# CONFIG_NCP_FS is not set
# CONFIG_CODA_FS is not set
# CONFIG_AFS_FS is not set

#
# Partition Types
#
# CONFIG_PARTITION_ADVANCED is not set
CONFIG_MSDOS_PARTITION=y
CONFIG_NLS=y
CONFIG_NLS_DEFAULT="iso8859-1"
CONFIG_NLS_CODEPAGE_437=y
# CONFIG_NLS_CODEPAGE_737 is not set
# CONFIG_NLS_CODEPAGE_775 is not set
# CONFIG_NLS_CODEPAGE_850 is not set
# CONFIG_NLS_CODEPAGE_852 is not set
# CONFIG_NLS_CODEPAGE_855 is not set
# CONFIG_NLS_CODEPAGE_857 is not set
# CONFIG_NLS_CODEPAGE_860 is not set
# CONFIG_NLS_CODEPAGE_861 is not set
# CONFIG_NLS_CODEPAGE_862 is not set
# CONFIG_NLS_CODEPAGE_863 is not set
# CONFIG_NLS_CODEPAGE_864 is not set
# CONFIG_NLS_CODEPAGE_865 is not set
# CONFIG_NLS_CODEPAGE_866 is not set
# CONFIG_NLS_CODEPAGE_869 is not set
# CONFIG_NLS_CODEPAGE_936 is not set
# CONFIG_NLS_CODEPAGE_950 is not set
# CONFIG_NLS_CODEPAGE_932 is not set
# CONFIG_NLS_CODEPAGE_949 is not set
# CONFIG_NLS_CODEPAGE_874 is not set
# CONFIG_NLS_ISO8859_8 is not set
# CONFIG_NLS_CODEPAGE_1250 is not set
# CONFIG_NLS_CODEPAGE_1251 is not set
CONFIG_NLS_ASCII=y
CONFIG_NLS_ISO8859_1=y
# CONFIG_NLS_ISO8859_2 is not set
# CONFIG_NLS_ISO8859_3 is not set
# CONFIG_NLS_ISO8859_4 is not set
# CONFIG_NLS_ISO8859_5 is not set
# CONFIG_NLS_ISO8859_6 is not set
# CONFIG_NLS_ISO8859_7 is not set
# CONFIG_NLS_ISO8859_9 is not set
# CONFIG_NLS_ISO8859_13 is not set
# CONFIG_NLS_ISO8859_14 is not set
# CONFIG_NLS_ISO8859_15 is not set
# CONFIG_NLS_KOI8_R is not set
# CONFIG_NLS_KOI8_U is not set
CONFIG_NLS_UTF8=y
# CONFIG_DLM is not set

#
# IBM 40x options
#

#
# Library routines
#
CONFIG_BITREVERSE=y
# CONFIG_CRC_CCITT is not set
# CONFIG_CRC16 is not set
# CONFIG_CRC_ITU_T is not set
CONFIG_CRC32=y
# CONFIG_CRC7 is not set
# CONFIG_LIBCRC32C is not set
CONFIG_PLIST=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y
CONFIG_INSTRUMENTATION=y
# CONFIG_PROFILING is not set
# CONFIG_MARKERS is not set

#
# Kernel hacking
#
CONFIG_PRINTK_TIME=y
CONFIG_ENABLE_WARN_DEPRECATED=y
CONFIG_ENABLE_MUST_CHECK=y
CONFIG_MAGIC_SYSRQ=y
# CONFIG_UNUSED_SYMBOLS is not set
# CONFIG_DEBUG_FS is not set
# CONFIG_HEADERS_CHECK is not set
CONFIG_DEBUG_KERNEL=y
# CONFIG_DEBUG_SHIRQ is not set
CONFIG_DETECT_SOFTLOCKUP=y
CONFIG_SCHED_DEBUG=y
# CONFIG_SCHEDSTATS is not set
# CONFIG_TIMER_STATS is not set
# CONFIG_DEBUG_SLAB is not set
# CONFIG_DEBUG_RT_MUTEXES is not set
# CONFIG_RT_MUTEX_TESTER is not set
# CONFIG_DEBUG_SPINLOCK is not set
CONFIG_DEBUG_MUTEXES=y
# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
# CONFIG_DEBUG_KOBJECT is not set
CONFIG_DEBUG_BUGVERBOSE=y
CONFIG_DEBUG_INFO=y
# CONFIG_DEBUG_VM is not set
# CONFIG_DEBUG_LIST is not set
# CONFIG_DEBUG_SG is not set
CONFIG_FORCED_INLINING=y
# CONFIG_BOOT_PRINTK_DELAY is not set
# CONFIG_FAULT_INJECTION is not set
# CONFIG_SAMPLES is not set
# CONFIG_KGDB is not set
# CONFIG_XMON is not set
# CONFIG_BDI_SWITCH is not set
# CONFIG_SERIAL_TEXT_DEBUG is not set

#
# Security options
#
# CONFIG_KEYS is not set
# CONFIG_SECURITY is not set
# CONFIG_SECURITY_FILE_CAPABILITIES is not set
# CONFIG_CRYPTO is not set