From: "Aneesh Kumar K.V" <aneesh.kumar@linux.vnet.ibm.com>
To: Nicholas Piggin <npiggin@gmail.com>, linuxppc-dev@lists.ozlabs.org
Cc: Nicholas Piggin <npiggin@gmail.com>,
Benjamin Herrenschmidt <benh@kernel.crashing.org>
Subject: Re: [PATCH v2 2/3] powerpc/64s/radix: tlbie improve preempt handling
Date: Thu, 26 Oct 2017 12:23:33 +0530 [thread overview]
Message-ID: <87bmku2ydu.fsf@linux.vnet.ibm.com> (raw)
In-Reply-To: <20171024130654.1223-3-npiggin@gmail.com>
Nicholas Piggin <npiggin@gmail.com> writes:
> Preempt should be consistently disabled for mm_is_thread_local tests,
> so bring the rest of these under preempt_disable().
>
> Preempt does not need to be disabled for the mm->context.id tests,
> which allows simplification and removal of gotos.
>
Reviewed-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
> Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
> ---
> arch/powerpc/mm/tlb-radix.c | 48 +++++++++++++++++++++------------------------
> 1 file changed, 22 insertions(+), 26 deletions(-)
>
> diff --git a/arch/powerpc/mm/tlb-radix.c b/arch/powerpc/mm/tlb-radix.c
> index 892544ebc2d2..18170dc264aa 100644
> --- a/arch/powerpc/mm/tlb-radix.c
> +++ b/arch/powerpc/mm/tlb-radix.c
> @@ -186,16 +186,15 @@ void radix__flush_tlb_mm(struct mm_struct *mm)
> {
> unsigned long pid;
>
> - preempt_disable();
> pid = mm->context.id;
> if (unlikely(pid == MMU_NO_CONTEXT))
> - goto no_context;
> + return;
>
> + preempt_disable();
> if (!mm_is_thread_local(mm))
> _tlbie_pid(pid, RIC_FLUSH_TLB);
> else
> _tlbiel_pid(pid, RIC_FLUSH_TLB);
> -no_context:
> preempt_enable();
> }
> EXPORT_SYMBOL(radix__flush_tlb_mm);
> @@ -204,16 +203,15 @@ void radix__flush_all_mm(struct mm_struct *mm)
> {
> unsigned long pid;
>
> - preempt_disable();
> pid = mm->context.id;
> if (unlikely(pid == MMU_NO_CONTEXT))
> - goto no_context;
> + return;
>
> + preempt_disable();
> if (!mm_is_thread_local(mm))
> _tlbie_pid(pid, RIC_FLUSH_ALL);
> else
> _tlbiel_pid(pid, RIC_FLUSH_ALL);
> -no_context:
> preempt_enable();
> }
> EXPORT_SYMBOL(radix__flush_all_mm);
> @@ -230,15 +228,14 @@ void radix__flush_tlb_page_psize(struct mm_struct *mm, unsigned long vmaddr,
> unsigned long pid;
> unsigned long ap = mmu_get_ap(psize);
>
> - preempt_disable();
> pid = mm->context.id;
> if (unlikely(pid == MMU_NO_CONTEXT))
> - goto bail;
> + return;
> + preempt_disable();
> if (!mm_is_thread_local(mm))
> _tlbie_va(vmaddr, pid, ap, RIC_FLUSH_TLB);
> else
> _tlbiel_va(vmaddr, pid, ap, RIC_FLUSH_TLB);
> -bail:
> preempt_enable();
> }
>
> @@ -322,54 +319,53 @@ void radix__flush_tlb_range_psize(struct mm_struct *mm, unsigned long start,
> {
> unsigned long pid;
> unsigned long addr;
> - int local = mm_is_thread_local(mm);
> + bool local;
> unsigned long ap = mmu_get_ap(psize);
> unsigned long page_size = 1UL << mmu_psize_defs[psize].shift;
>
> -
> - preempt_disable();
> pid = mm->context.id;
> if (unlikely(pid == MMU_NO_CONTEXT))
> - goto err_out;
> + return;
>
> + preempt_disable();
> + local = mm_is_thread_local(mm);
> if (end == TLB_FLUSH_ALL ||
> (end - start) > tlb_single_page_flush_ceiling * page_size) {
> if (local)
> _tlbiel_pid(pid, RIC_FLUSH_TLB);
> else
> _tlbie_pid(pid, RIC_FLUSH_TLB);
> - goto err_out;
> - }
> - for (addr = start; addr < end; addr += page_size) {
> + } else {
> + for (addr = start; addr < end; addr += page_size) {
>
> - if (local)
> - _tlbiel_va(addr, pid, ap, RIC_FLUSH_TLB);
> - else
> - _tlbie_va(addr, pid, ap, RIC_FLUSH_TLB);
> + if (local)
> + _tlbiel_va(addr, pid, ap, RIC_FLUSH_TLB);
> + else
> + _tlbie_va(addr, pid, ap, RIC_FLUSH_TLB);
> + }
> }
> -err_out:
> preempt_enable();
> }
>
> #ifdef CONFIG_TRANSPARENT_HUGEPAGE
> void radix__flush_tlb_collapsed_pmd(struct mm_struct *mm, unsigned long addr)
> {
> - int local = mm_is_thread_local(mm);
> unsigned long ap = mmu_get_ap(mmu_virtual_psize);
> unsigned long pid, end;
> + bool local;
>
> - preempt_disable();
> pid = mm->context.id;
> if (unlikely(pid == MMU_NO_CONTEXT))
> - goto no_context;
> + return;
>
> /* 4k page size, just blow the world */
> if (PAGE_SIZE == 0x1000) {
> radix__flush_all_mm(mm);
> - preempt_enable();
> return;
> }
>
> + preempt_disable();
> + local = mm_is_thread_local(mm);
> /* Otherwise first do the PWC */
> if (local)
> _tlbiel_pid(pid, RIC_FLUSH_PWC);
> @@ -384,7 +380,7 @@ void radix__flush_tlb_collapsed_pmd(struct mm_struct *mm, unsigned long addr)
> else
> _tlbie_va(addr, pid, ap, RIC_FLUSH_TLB);
> }
> -no_context:
> +
> preempt_enable();
> }
> #endif /* CONFIG_TRANSPARENT_HUGEPAGE */
> --
> 2.13.3
next prev parent reply other threads:[~2017-10-26 6:53 UTC|newest]
Thread overview: 10+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-10-24 13:06 [PATCH v2 0/3] powerpc/64s/radix: misc minor TLB flush fixes Nicholas Piggin
2017-10-24 13:06 ` [PATCH v2 1/3] powerpc/64s/radix: fix preempt imbalance in TLB flush Nicholas Piggin
2017-10-26 6:52 ` Aneesh Kumar K.V
2017-11-01 5:17 ` [v2,1/3] " Michael Ellerman
2017-10-24 13:06 ` [PATCH v2 2/3] powerpc/64s/radix: tlbie improve preempt handling Nicholas Piggin
2017-10-26 6:53 ` Aneesh Kumar K.V [this message]
2017-11-07 23:30 ` [v2,2/3] " Michael Ellerman
2017-10-24 13:06 ` [PATCH v2 3/3] powerpc/64s/radix: Fix process table entry cache invalidation Nicholas Piggin
2017-10-26 6:53 ` Aneesh Kumar K.V
2017-11-07 23:30 ` [v2, " Michael Ellerman
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=87bmku2ydu.fsf@linux.vnet.ibm.com \
--to=aneesh.kumar@linux.vnet.ibm.com \
--cc=benh@kernel.crashing.org \
--cc=linuxppc-dev@lists.ozlabs.org \
--cc=npiggin@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).