From: "Aneesh Kumar K.V" <aneesh.kumar@linux.vnet.ibm.com>
To: Ian Munsie <imunsie@au1.ibm.com>, mpe <mpe@ellerman.id.au>
Cc: cbe-oss-dev <cbe-oss-dev@lists.ozlabs.org>,
mikey <mikey@neuling.org>, arnd <arnd@arndb.de>,
greg <greg@kroah.com>,
linux-kernel <linux-kernel@vger.kernel.org>,
linuxppc-dev <linuxppc-dev@ozlabs.org>, anton <anton@samba.org>,
imunsie <imunsie@au1.ibm.com>, jk <jk@ozlabs.org>
Subject: Re: [PATCH v2 1/4] CXL: Disable secondary hash in segment table
Date: Tue, 28 Oct 2014 13:42:38 +0530 [thread overview]
Message-ID: <87d29cy5mx.fsf@linux.vnet.ibm.com> (raw)
In-Reply-To: <1414466730-15591-2-git-send-email-imunsie@au.ibm.com>
Ian Munsie <imunsie@au1.ibm.com> writes:
> From: Ian Munsie <imunsie@au1.ibm.com>
>
> This patch simplifies the process of finding a free segment table entry
> by disabling the secondary hash. This reduces the number of possible
> entries in the segment table for a given address from 16 to 8.
>
> Due to the large segment sizes we use it is extremely unlikely that the
> secondary hash would ever have been used in practice, so this should not
> have any negative impacts and may even improve performance due to the
> reduced number of comparisons that software & hardware need to perform.
>
> This patch clears the SC bit in the hardware's state register
> (CXL_PSL_SR_An) to disable the secondary hash in the hardware since we
> can no longer fill out entries using it.
This could have also gone as a code comment.
>
> Signed-off-by: Ian Munsie <imunsie@au1.ibm.com>
Reviewed-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
> ---
> drivers/misc/cxl/fault.c | 30 ++++++++----------------------
> drivers/misc/cxl/native.c | 4 ++--
> 2 files changed, 10 insertions(+), 24 deletions(-)
>
> diff --git a/drivers/misc/cxl/fault.c b/drivers/misc/cxl/fault.c
> index 69506eb..d0e97fd 100644
> --- a/drivers/misc/cxl/fault.c
> +++ b/drivers/misc/cxl/fault.c
> @@ -22,29 +22,19 @@
> #include "cxl.h"
>
> static struct cxl_sste* find_free_sste(struct cxl_sste *primary_group,
> - bool sec_hash,
> - struct cxl_sste *secondary_group,
> unsigned int *lru)
> {
> - unsigned int i, entry;
> + unsigned int entry;
> struct cxl_sste *sste, *group = primary_group;
>
> - for (i = 0; i < 2; i++) {
> - for (entry = 0; entry < 8; entry++) {
> - sste = group + entry;
> - if (!(be64_to_cpu(sste->esid_data) & SLB_ESID_V))
> - return sste;
> - }
> - if (!sec_hash)
> - break;
> - group = secondary_group;
> + for (entry = 0; entry < 8; entry++) {
> + sste = group + entry;
> + if (!(be64_to_cpu(sste->esid_data) & SLB_ESID_V))
> + return sste;
> }
> /* Nothing free, select an entry to cast out */
> - if (sec_hash && (*lru & 0x8))
> - sste = secondary_group + (*lru & 0x7);
> - else
> - sste = primary_group + (*lru & 0x7);
> - *lru = (*lru + 1) & 0xf;
> + sste = primary_group + *lru;
> + *lru = (*lru + 1) & 0x7;
>
> return sste;
> }
> @@ -53,22 +43,18 @@ static void cxl_load_segment(struct cxl_context *ctx, struct copro_slb *slb)
> {
> /* mask is the group index, we search primary and secondary here. */
> unsigned int mask = (ctx->sst_size >> 7)-1; /* SSTP0[SegTableSize] */
> - bool sec_hash = 1;
> struct cxl_sste *sste;
> unsigned int hash;
> unsigned long flags;
>
>
> - sec_hash = !!(cxl_p1n_read(ctx->afu, CXL_PSL_SR_An) & CXL_PSL_SR_An_SC);
> -
> if (slb->vsid & SLB_VSID_B_1T)
> hash = (slb->esid >> SID_SHIFT_1T) & mask;
> else /* 256M */
> hash = (slb->esid >> SID_SHIFT) & mask;
>
> spin_lock_irqsave(&ctx->sste_lock, flags);
> - sste = find_free_sste(ctx->sstp + (hash << 3), sec_hash,
> - ctx->sstp + ((~hash & mask) << 3), &ctx->sst_lru);
> + sste = find_free_sste(ctx->sstp + (hash << 3), &ctx->sst_lru);
>
> pr_devel("CXL Populating SST[%li]: %#llx %#llx\n",
> sste - ctx->sstp, slb->vsid, slb->esid);
> diff --git a/drivers/misc/cxl/native.c b/drivers/misc/cxl/native.c
> index 623286a..d47532e 100644
> --- a/drivers/misc/cxl/native.c
> +++ b/drivers/misc/cxl/native.c
> @@ -417,7 +417,7 @@ static int attach_afu_directed(struct cxl_context *ctx, u64 wed, u64 amr)
> ctx->elem->haurp = 0; /* disable */
> ctx->elem->sdr = cpu_to_be64(mfspr(SPRN_SDR1));
>
> - sr = CXL_PSL_SR_An_SC;
> + sr = 0;
> if (ctx->master)
> sr |= CXL_PSL_SR_An_MP;
> if (mfspr(SPRN_LPCR) & LPCR_TC)
> @@ -508,7 +508,7 @@ static int attach_dedicated(struct cxl_context *ctx, u64 wed, u64 amr)
> u64 sr;
> int rc;
>
> - sr = CXL_PSL_SR_An_SC;
> + sr = 0;
> set_endian(sr);
> if (ctx->master)
> sr |= CXL_PSL_SR_An_MP;
> --
> 2.1.1
>
> --
> To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at http://vger.kernel.org/majordomo-info.html
> Please read the FAQ at http://www.tux.org/lkml/
next prev parent reply other threads:[~2014-10-28 8:12 UTC|newest]
Thread overview: 9+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-10-28 3:25 [PATCH v2] CXL: Fix PSL error due to duplicate segment table entries Ian Munsie
2014-10-28 3:25 ` [PATCH v2 1/4] CXL: Disable secondary hash in segment table Ian Munsie
2014-10-28 8:12 ` Aneesh Kumar K.V [this message]
2014-10-28 3:25 ` [PATCH v2 2/4] CXL: Refactor cxl_load_segment and find_free_sste Ian Munsie
2014-10-28 8:13 ` Aneesh Kumar K.V
2014-10-28 3:25 ` [PATCH v2 3/4] powerpc/copro: Use appropriate ESID mask in copro_calculate_slb Ian Munsie
2014-10-28 8:13 ` Aneesh Kumar K.V
2014-10-28 3:25 ` [PATCH v2 4/4] CXL: Fix PSL error due to duplicate segment table entries Ian Munsie
2014-10-28 8:16 ` Aneesh Kumar K.V
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=87d29cy5mx.fsf@linux.vnet.ibm.com \
--to=aneesh.kumar@linux.vnet.ibm.com \
--cc=anton@samba.org \
--cc=arnd@arndb.de \
--cc=cbe-oss-dev@lists.ozlabs.org \
--cc=greg@kroah.com \
--cc=imunsie@au1.ibm.com \
--cc=jk@ozlabs.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linuxppc-dev@ozlabs.org \
--cc=mikey@neuling.org \
--cc=mpe@ellerman.id.au \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).