Re: [PowerPC] [PASEMI] Issue with the identification of ATA drives after the of/irq updates 2024-05-29

[Michael Ellerman <mpe@ellerman.id.au>]

Rob Herring <robh@kernel.org> writes:
> On Tue, Jul 2, 2024 at 10:54 AM Marc Zyngier <maz@kernel.org> wrote:
>>
>> On Sun, 30 Jun 2024 11:21:55 +0100,
>> Christian Zigotzky <chzigotzky@xenosoft.de> wrote:
>> >
>> > Hello,
>> >
>> > There is an issue with the identification of ATA drives with our
>> > P.A. Semi Nemo boards [1] after the
>> > commit "of/irq: Factor out parsing of interrupt-map parent
>> > phandle+args from of_irq_parse_raw()" [2].
>>
>> [snip]
>>
>> My earlier request for valuable debug information still stands. But
>> while you're at it, can you please give the following hack a go?
>>
>>         M.
>>
>> --- a/drivers/of/irq.c
>> +++ b/drivers/of/irq.c
>> @@ -282,8 +282,10 @@ int of_irq_parse_raw(const __be32 *addr, struct of_phandle_args *out_irq)
>>
>>                         oldimap = imap;
>>                         imap = of_irq_parse_imap_parent(oldimap, imaplen, out_irq);
>> -                       if (!imap)
>> -                               goto fail;
>> +                       if (!imap) {
>> +                               match = 0;
>> +                               break;
>> +                       }
>
> AFAICT reading the DT, I don't think this would fix it. imap should
> only be null if malformed. This case to me looks like interrupt-map
> has the correct cell sizes, but just never matches to do the mapping.
> So maybe imaplen is off and that causes us to end up here, but if
> there's an error I don't see it. A boot with DEBUG enabled in
> drivers/of/irq.c would help.
>
>>
>>                         match &= of_device_is_available(out_irq->np);
>>                         if (match)
>>
>> This may not be the final workaround even if it solves your boot
>> problem, but will at least give us a hint at what is going wrong.
>>
>> I have the fuzzy feeling that we may be able to lob this broken system
>> as part of the of_irq_imap_abusers[] array, which would solve things
>> pretty "neatly".
>
> I think this would work and would consolidate the work-arounds. It
> would need either "pasemi,rootbus" or "pa-pxp" added to the list.

Not sure if it helps, but there's already some code in arch/powerpc to
"fixup" the nemo device tree at boot.

I'm not sure if it's actually the problem here, but it might be, it does
renumber some interrupts. Or possibly it could be tweaked to fix
whatever the issue is.

The code is in fixup_device_tree_pasemi():

  https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/tree/arch/powerpc/kernel/prom_init.c?h=v6.10-rc5#n3114

cheers