Re: [PASEMI] Nemo board doesn't recognize any ATA disks with the pci-v5.16 updates

[Marc Zyngier <maz@kernel.org>]

On Wed, 10 Nov 2021 18:07:24 +0000,
Christian Zigotzky <chzigotzky@xenosoft.de> wrote:
> 
> On 09 November 2021 at 03:45 pm, Christian Zigotzky wrote:
> > Hello,
> >
> > The Nemo board [1] doesn't recognize any ATA disks with the
> pci-v5.16 updates [2].
> >
> > Error messages:
> >
> > ata4.00: gc timeout cmd 0xec
> > ata4.00: failed to IDENTIFY (I/O error, error_mask=0x4)
> > ata1.00: gc timeout cmd 0xec
> > ata1.00: failed to IDENTIFY (I/O error, error_mask=0x4)
> > ata3.00: gc timeout cmd 0xec
> > ata3.00: failed to IDENTIFY (I/O error, error_mask=0x4)
> >
> > I was able to revert the new pci-v5.16 updates [2]. After a new
> compiling, the kernel recognize all ATA disks correctly.
> >
> > Could you please check the pci-v5.16 updates [2]?
> >
> > Please find attached the kernel config.
> >
> > Thanks,
> > Christian
> >
> > [1] https://en.wikipedia.org/wiki/AmigaOne_X1000
> > [2]
> https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=0c5c62ddf88c34bc83b66e4ac9beb2bb0e1887d4
> 
> Hi All,
> 
> Many thanks for your nice responses.
> 
> I bisected today [1]. 0412841812265734c306ba5ef8088bcb64d5d3bd
> (of/irq: Allow matching of an interrupt-map local to an interrupt
> controller) [2] is the first bad commit.

Can you please give the following hack a go and post the result
(including the full dmesg)?

Thanks,

	M.
diff --git a/drivers/of/irq.c b/drivers/of/irq.c
index 32be5a03951f..8cf0cc9b7caf 100644
--- a/drivers/of/irq.c
+++ b/drivers/of/irq.c
@@ -156,14 +156,15 @@ int of_irq_parse_raw(const __be32 *addr, struct of_phandle_args *out_irq)
 
 	/* Now start the actual "proper" walk of the interrupt tree */
 	while (ipar != NULL) {
+		bool intc = of_property_read_bool(ipar, "interrupt-controller");
+
 		/*
 		 * Now check if cursor is an interrupt-controller and
 		 * if it is then we are done, unless there is an
 		 * interrupt-map which takes precedence.
 		 */
 		imap = of_get_property(ipar, "interrupt-map", &imaplen);
-		if (imap == NULL &&
-		    of_property_read_bool(ipar, "interrupt-controller")) {
+		if (imap == NULL && intc) {
 			pr_debug(" -> got it !\n");
 			return 0;
 		}
@@ -244,8 +245,14 @@ int of_irq_parse_raw(const __be32 *addr, struct of_phandle_args *out_irq)
 
 			pr_debug(" -> imaplen=%d\n", imaplen);
 		}
-		if (!match)
+		if (!match) {
+			if (intc) {
+				pr_info("%pOF interrupt-map failed, using interrupt-controller\n", ipar);
+				return 0;
+			}
+
 			goto fail;
+		}
 
 		/*
 		 * Successfully parsed an interrrupt-map translation; copy new

-- 
Without deviation from the norm, progress is not possible.