From: "Aneesh Kumar K.V" <aneesh.kumar@linux.vnet.ibm.com>
To: Nicholas Piggin <npiggin@gmail.com>, linuxppc-dev@lists.ozlabs.org
Cc: Nicholas Piggin <npiggin@gmail.com>, Florian Weimer <fweimer@redhat.com>
Subject: Re: [PATCH 4/5] powerpc/64s/radix: Fix 128TB-512TB virtual address boundary case allocation
Date: Mon, 06 Nov 2017 16:44:48 +0530 [thread overview]
Message-ID: <87po8vslp3.fsf@linux.vnet.ibm.com> (raw)
In-Reply-To: <20171106100315.29720-5-npiggin@gmail.com>
Nicholas Piggin <npiggin@gmail.com> writes:
> Radix VA space allocations test addresses against mm->task_size which is
> 512TB, even in cases where the intention is to limit allocation to below
> 128TB.
>
> This results in mmap with a hint address below 128TB but address + length
> above 128TB succeeding when it should fail (as hash does after the
> previous patch).
>
> Set the high address limit to be considered up front, and base subsequent
> allocation checks on that consistently.
Doesn't setting info.high_limit take care of that ? I would expect
vm_unmapped_area to fail based on info.high_limit. Is this with MAP_FIXED?
>
> Cc: "Aneesh Kumar K.V" <aneesh.kumar@linux.vnet.ibm.com>
> Fixes: f4ea6dcb08 ("powerpc/mm: Enable mappings above 128TB")
> Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
> ---
> arch/powerpc/mm/hugetlbpage-radix.c | 13 +++++++------
> arch/powerpc/mm/mmap.c | 27 ++++++++++++++-------------
> 2 files changed, 21 insertions(+), 19 deletions(-)
>
> diff --git a/arch/powerpc/mm/hugetlbpage-radix.c b/arch/powerpc/mm/hugetlbpage-radix.c
> index a12e86395025..9c6a411e9c85 100644
> --- a/arch/powerpc/mm/hugetlbpage-radix.c
> +++ b/arch/powerpc/mm/hugetlbpage-radix.c
> @@ -48,14 +48,18 @@ radix__hugetlb_get_unmapped_area(struct file *file, unsigned long addr,
> struct mm_struct *mm = current->mm;
> struct vm_area_struct *vma;
> struct hstate *h = hstate_file(file);
> + unsigned long high_limit = DEFAULT_MAP_WINDOW;
> struct vm_unmapped_area_info info;
>
> if (unlikely(addr > mm->context.addr_limit && addr < TASK_SIZE))
> mm->context.addr_limit = TASK_SIZE;
>
> + if (addr > high_limit)
> + high_limit = TASK_SIZE;
> +
> if (len & ~huge_page_mask(h))
> return -EINVAL;
> - if (len > mm->task_size)
> + if (len > high_limit)
> return -ENOMEM;
>
> if (flags & MAP_FIXED) {
> @@ -67,7 +71,7 @@ radix__hugetlb_get_unmapped_area(struct file *file, unsigned long addr,
> if (addr) {
> addr = ALIGN(addr, huge_page_size(h));
> vma = find_vma(mm, addr);
> - if (mm->task_size - len >= addr &&
> + if (high_limit - len >= addr &&
> (!vma || addr + len <= vm_start_gap(vma)))
> return addr;
> }
> @@ -78,12 +82,9 @@ radix__hugetlb_get_unmapped_area(struct file *file, unsigned long addr,
> info.flags = VM_UNMAPPED_AREA_TOPDOWN;
> info.length = len;
> info.low_limit = PAGE_SIZE;
> - info.high_limit = current->mm->mmap_base;
> + info.high_limit = mm->mmap_base + (high_limit - DEFAULT_MAP_WINDOW);
> info.align_mask = PAGE_MASK & ~huge_page_mask(h);
> info.align_offset = 0;
>
> - if (addr > DEFAULT_MAP_WINDOW)
> - info.high_limit += mm->context.addr_limit - DEFAULT_MAP_WINDOW;
> -
> return vm_unmapped_area(&info);
> }
> diff --git a/arch/powerpc/mm/mmap.c b/arch/powerpc/mm/mmap.c
> index 5d78b193fec4..e6cb3b3f7e93 100644
> --- a/arch/powerpc/mm/mmap.c
> +++ b/arch/powerpc/mm/mmap.c
> @@ -106,13 +106,17 @@ radix__arch_get_unmapped_area(struct file *filp, unsigned long addr,
> {
> struct mm_struct *mm = current->mm;
> struct vm_area_struct *vma;
> + unsigned long high_limit = DEFAULT_MAP_WINDOW;
> struct vm_unmapped_area_info info;
>
> if (unlikely(addr > mm->context.addr_limit &&
> mm->context.addr_limit != TASK_SIZE))
> mm->context.addr_limit = TASK_SIZE;
>
> - if (len > mm->task_size - mmap_min_addr)
> + if (addr > high_limit)
> + high_limit = TASK_SIZE;
> +
> + if (len > high_limit - mmap_min_addr)
> return -ENOMEM;
>
> if (flags & MAP_FIXED)
> @@ -121,7 +125,7 @@ radix__arch_get_unmapped_area(struct file *filp, unsigned long addr,
> if (addr) {
> addr = PAGE_ALIGN(addr);
> vma = find_vma(mm, addr);
> - if (mm->task_size - len >= addr && addr >= mmap_min_addr &&
> + if (high_limit - len >= addr && addr >= mmap_min_addr &&
> (!vma || addr + len <= vm_start_gap(vma)))
> return addr;
> }
> @@ -129,13 +133,9 @@ radix__arch_get_unmapped_area(struct file *filp, unsigned long addr,
> info.flags = 0;
> info.length = len;
> info.low_limit = mm->mmap_base;
> + info.high_limit = high_limit;
> info.align_mask = 0;
>
> - if (unlikely(addr > DEFAULT_MAP_WINDOW))
> - info.high_limit = mm->context.addr_limit;
> - else
> - info.high_limit = DEFAULT_MAP_WINDOW;
> -
> return vm_unmapped_area(&info);
> }
>
> @@ -149,14 +149,18 @@ radix__arch_get_unmapped_area_topdown(struct file *filp,
> struct vm_area_struct *vma;
> struct mm_struct *mm = current->mm;
> unsigned long addr = addr0;
> + unsigned long high_limit = DEFAULT_MAP_WINDOW;
> struct vm_unmapped_area_info info;
>
> if (unlikely(addr > mm->context.addr_limit &&
> mm->context.addr_limit != TASK_SIZE))
> mm->context.addr_limit = TASK_SIZE;
>
> + if (addr > high_limit)
> + high_limit = TASK_SIZE;
> +
> /* requested length too big for entire address space */
> - if (len > mm->task_size - mmap_min_addr)
> + if (len > high_limit - mmap_min_addr)
> return -ENOMEM;
>
> if (flags & MAP_FIXED)
> @@ -166,7 +170,7 @@ radix__arch_get_unmapped_area_topdown(struct file *filp,
> if (addr) {
> addr = PAGE_ALIGN(addr);
> vma = find_vma(mm, addr);
> - if (mm->task_size - len >= addr && addr >= mmap_min_addr &&
> + if (high_limit - len >= addr && addr >= mmap_min_addr &&
> (!vma || addr + len <= vm_start_gap(vma)))
> return addr;
> }
> @@ -174,12 +178,9 @@ radix__arch_get_unmapped_area_topdown(struct file *filp,
> info.flags = VM_UNMAPPED_AREA_TOPDOWN;
> info.length = len;
> info.low_limit = max(PAGE_SIZE, mmap_min_addr);
> - info.high_limit = mm->mmap_base;
> + info.high_limit = mm->mmap_base + (high_limit - DEFAULT_MAP_WINDOW);
> info.align_mask = 0;
>
> - if (addr > DEFAULT_MAP_WINDOW)
> - info.high_limit += mm->context.addr_limit - DEFAULT_MAP_WINDOW;
> -
> addr = vm_unmapped_area(&info);
> if (!(addr & ~PAGE_MASK))
> return addr;
> --
> 2.15.0
next prev parent reply other threads:[~2017-11-06 11:15 UTC|newest]
Thread overview: 22+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-11-06 10:03 [PATCH 0/5] VA allocator fixes Nicholas Piggin
2017-11-06 10:03 ` [PATCH 1/5] powerpc/64s/hash: Fix 128TB-512TB virtual address boundary case allocation Nicholas Piggin
2017-11-06 10:38 ` Aneesh Kumar K.V
2017-11-06 10:54 ` Nicholas Piggin
2017-11-06 11:05 ` Aneesh Kumar K.V
2017-11-06 11:21 ` Nicholas Piggin
2017-11-07 2:00 ` Aneesh Kumar K.V
2017-11-07 2:03 ` Nicholas Piggin
2017-11-06 10:03 ` [PATCH 2/5] powerpc/64s/hash: Allow MAP_FIXED allocations to cross 128TB boundary Nicholas Piggin
2017-11-06 10:44 ` Aneesh Kumar K.V
2017-11-06 11:55 ` Nicholas Piggin
2017-11-07 2:28 ` Michael Ellerman
2017-11-07 2:52 ` Nicholas Piggin
2017-11-06 10:03 ` [PATCH 3/5] powerpc/64s/hash: Fix fork() with 512TB process address space Nicholas Piggin
2017-11-06 10:44 ` Aneesh Kumar K.V
2017-11-06 10:03 ` [PATCH 4/5] powerpc/64s/radix: Fix 128TB-512TB virtual address boundary case allocation Nicholas Piggin
2017-11-06 11:14 ` Aneesh Kumar K.V [this message]
2017-11-06 11:42 ` Nicholas Piggin
2017-11-06 10:03 ` [PATCH 5/5] powerpc/64s: mm_context.addr_limit is only used on hash Nicholas Piggin
2017-11-06 15:16 ` [PATCH 0/5] VA allocator fixes Florian Weimer
2017-11-07 0:06 ` Nicholas Piggin
2017-11-07 1:59 ` Aneesh Kumar K.V
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=87po8vslp3.fsf@linux.vnet.ibm.com \
--to=aneesh.kumar@linux.vnet.ibm.com \
--cc=fweimer@redhat.com \
--cc=linuxppc-dev@lists.ozlabs.org \
--cc=npiggin@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).