From mboxrd@z Thu Jan 1 00:00:00 1970 To: Samuel Rydh Cc: linuxppc-dev@lists.linuxppc.org, linuxppc-user@lists.linuxppc.org Subject: Re: Mac-on-Linux References: <19990519235050.60265@ibrium.se> <19990520192459.17170@ibrium.se> <19990520171823.A409@jasons.dyn.kpn.cx> <87zp2ysaku.fsf@hades.nocrew.net> <19990521203719.44590@ibrium.se> Content-Type: text/plain; charset=US-ASCII From: Stefan Berndtsson Date: 21 May 1999 22:19:34 +0200 In-Reply-To: Samuel Rydh's message of "Fri, 21 May 1999 20:37:19 +0200" Message-ID: <87so8qp44p.fsf@hades.nocrew.net> MIME-Version: 1.0 Sender: owner-linuxppc-dev@lists.linuxppc.org List-Id: Samuel Rydh writes: > Thanks for the testing! My directions were bad though. > I missed the fact that the kernel source uses #ifdef > and not #if, so the line > > #define NO_RELOAD_HTAB 1 > > should be commented out in 'arch/ppc/kernel/head.S' and > 'arch/ppc/mm/init.c'. > > I've looked through the Mac-on-Linux kernel source, and I > think this should be sufficient to add support for the 603. > (There is a 603 incompatible function used by the debugger, > but I don't think it is used normally.) Ok.. this seems to help a lot. It no longer panics, and I've got a rom-image for my performa 6400, but when I tell it to start with Meta-G, it just sits there. This machine has a valkyrie graphics card, and since platinum seems to be more or less the only thing supported, I can guess that's why I don't see anything. Is that why? :) Anyway.. it exits when I press Ctrl-C, so the machine is alive and all. One step in the right direction :) /Stefan [[ This message was sent via the linuxppc-dev mailing list. Replies are ]] [[ not forced back to the list, so be sure to Cc linuxppc-dev if your ]] [[ reply is of general interest. Please check http://lists.linuxppc.org/ ]] [[ and http://www.linuxppc.org/ for useful information before posting. ]]