From: "Aneesh Kumar K.V" <aneesh.kumar@linux.vnet.ibm.com>
To: Reza Arbab <arbab@linux.vnet.ibm.com>,
Michael Ellerman <mpe@ellerman.id.au>,
Benjamin Herrenschmidt <benh@kernel.crashing.org>,
Paul Mackerras <paulus@samba.org>
Cc: linuxppc-dev@lists.ozlabs.org,
Balbir Singh <bsingharora@gmail.com>,
Alistair Popple <apopple@au1.ibm.com>
Subject: Re: [PATCH v3 3/5] powerpc/mm: add radix__create_section_mapping()
Date: Mon, 19 Dec 2016 14:34:13 +0530 [thread overview]
Message-ID: <87zijsthma.fsf@linux.vnet.ibm.com> (raw)
In-Reply-To: <1481831443-22761-4-git-send-email-arbab@linux.vnet.ibm.com>
Reza Arbab <arbab@linux.vnet.ibm.com> writes:
> Add the linear page mapping function for radix, used by memory hotplug.
> This is similar to vmemmap_populate().
>
Ok with this patch your first patch becomes useful. Can you merge that
with this and rename mmu_linear_psize to mmu_hotplug_psize or even use
mmu_virtual_psize. The linear naming is confusing.
> Signed-off-by: Reza Arbab <arbab@linux.vnet.ibm.com>
> ---
> arch/powerpc/include/asm/book3s/64/radix.h | 4 ++++
> arch/powerpc/mm/pgtable-book3s64.c | 2 +-
> arch/powerpc/mm/pgtable-radix.c | 19 +++++++++++++++++++
> 3 files changed, 24 insertions(+), 1 deletion(-)
>
> diff --git a/arch/powerpc/include/asm/book3s/64/radix.h b/arch/powerpc/include/asm/book3s/64/radix.h
> index b4d1302..43c2571 100644
> --- a/arch/powerpc/include/asm/book3s/64/radix.h
> +++ b/arch/powerpc/include/asm/book3s/64/radix.h
> @@ -291,5 +291,9 @@ static inline unsigned long radix__get_tree_size(void)
> }
> return rts_field;
> }
> +
> +#ifdef CONFIG_MEMORY_HOTPLUG
> +int radix__create_section_mapping(unsigned long start, unsigned long end);
> +#endif /* CONFIG_MEMORY_HOTPLUG */
> #endif /* __ASSEMBLY__ */
> #endif
> diff --git a/arch/powerpc/mm/pgtable-book3s64.c b/arch/powerpc/mm/pgtable-book3s64.c
> index 653ff6c..2b13f6b 100644
> --- a/arch/powerpc/mm/pgtable-book3s64.c
> +++ b/arch/powerpc/mm/pgtable-book3s64.c
> @@ -131,7 +131,7 @@ void mmu_cleanup_all(void)
> int create_section_mapping(unsigned long start, unsigned long end)
> {
> if (radix_enabled())
> - return -ENODEV;
> + return radix__create_section_mapping(start, end);
>
> return hash__create_section_mapping(start, end);
> }
> diff --git a/arch/powerpc/mm/pgtable-radix.c b/arch/powerpc/mm/pgtable-radix.c
> index 54bd70e..8201d1f 100644
> --- a/arch/powerpc/mm/pgtable-radix.c
> +++ b/arch/powerpc/mm/pgtable-radix.c
> @@ -465,6 +465,25 @@ void radix__setup_initial_memory_limit(phys_addr_t first_memblock_base,
> memblock_set_current_limit(first_memblock_base + first_memblock_size);
> }
>
> +#ifdef CONFIG_MEMORY_HOTPLUG
> +int radix__create_section_mapping(unsigned long start, unsigned long end)
> +{
> + unsigned long page_size = 1 << mmu_psize_defs[mmu_linear_psize].shift;
> +
> + /* Align to the page size of the linear mapping. */
> + start = _ALIGN_DOWN(start, page_size);
> +
> + for (; start < end; start += page_size) {
> + int rc = radix__map_kernel_page(start, __pa(start),
> + PAGE_KERNEL, page_size);
> + if (rc)
> + return rc;
> + }
> +
> + return 0;
> +}
> +#endif /* CONFIG_MEMORY_HOTPLUG */
> +
> #ifdef CONFIG_SPARSEMEM_VMEMMAP
> int __meminit radix__vmemmap_create_mapping(unsigned long start,
> unsigned long page_size,
> --
> 1.8.3.1
next prev parent reply other threads:[~2016-12-19 9:04 UTC|newest]
Thread overview: 23+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-12-15 19:50 [PATCH v3 0/5] powerpc/mm: enable memory hotplug on radix Reza Arbab
2016-12-15 19:50 ` [PATCH v3 1/5] powerpc/mm: set the radix linear page mapping size Reza Arbab
2016-12-19 8:58 ` Aneesh Kumar K.V
2016-12-19 20:53 ` Benjamin Herrenschmidt
2016-12-20 2:02 ` Aneesh Kumar K.V
2016-12-15 19:50 ` [PATCH v3 2/5] powerpc/mm: refactor {create, remove}_section_mapping() Reza Arbab
2016-12-19 9:00 ` Aneesh Kumar K.V
2016-12-19 18:00 ` [PATCH v3 2/5] powerpc/mm: refactor {create,remove}_section_mapping() Reza Arbab
2016-12-20 5:26 ` Balbir Singh
2016-12-15 19:50 ` [PATCH v3 3/5] powerpc/mm: add radix__create_section_mapping() Reza Arbab
2016-12-19 9:04 ` Aneesh Kumar K.V [this message]
2016-12-19 18:06 ` Reza Arbab
2016-12-21 7:03 ` Anshuman Khandual
2016-12-20 6:28 ` Balbir Singh
2016-12-20 15:32 ` Reza Arbab
2016-12-15 19:50 ` [PATCH v3 4/5] powerpc/mm: add radix__remove_section_mapping() Reza Arbab
2016-12-19 9:48 ` Aneesh Kumar K.V
2016-12-19 18:11 ` Reza Arbab
2016-12-19 20:59 ` Benjamin Herrenschmidt
2016-12-15 19:50 ` [PATCH v3 5/5] powerpc/mm: unstub radix__vmemmap_remove_mapping() Reza Arbab
2016-12-16 14:38 ` [PATCH v3 0/5] powerpc/mm: enable memory hotplug on radix Balbir Singh
2016-12-19 17:58 ` Reza Arbab
2016-12-21 6:54 ` Anshuman Khandual
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=87zijsthma.fsf@linux.vnet.ibm.com \
--to=aneesh.kumar@linux.vnet.ibm.com \
--cc=apopple@au1.ibm.com \
--cc=arbab@linux.vnet.ibm.com \
--cc=benh@kernel.crashing.org \
--cc=bsingharora@gmail.com \
--cc=linuxppc-dev@lists.ozlabs.org \
--cc=mpe@ellerman.id.au \
--cc=paulus@samba.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).