From: "Jean-Michel Hautbois" <jhautbois@gmail.com>
To: linuxppc-dev@ozlabs.org
Subject: [MPC8272ADS]Cannot start my Linux Kernel
Date: Thu, 15 Jan 2009 12:42:50 +0100 [thread overview]
Message-ID: <8cad0aa0901150342s2362e53bqf9472c1dc239636c@mail.gmail.com> (raw)
[-- Attachment #1: Type: text/plain, Size: 1975 bytes --]
Hi everybody !
This my first (but not least :) ) message on that mailing list. I hope I
will find my solution.
Here is my problem:
I have a MPC8272ADS board, 64MB RAM, 8MB Flash.
I compiled u-boot using the existing config file, and compiled my linux
kernel successfully with the defconfig file too.
I have updated u-boot, downloaded my kernel file, and a ramdisk image from
the eldk distribution.
I have tried using a lot of bootargs (
bootargs root=/dev/ram rw console=ttyS0,115200
bootargs through nfs, etc.)
When I am resetting my card, it reboots:
bootargs=root=/dev/ram rw console=ttyS0,115200
bootcmd=bootm ff800000 ff980000
## Booting kernel from Legacy Image at ff800000 ...
Image Name: Linux-2.6.29-rc1-01197-g5a7b6e7-
Image Type: PowerPC Linux Kernel Image (gzip compressed)
Data Size: 1487167 Bytes = 1.4 MB
Load Address: 00000000
Entry Point: 00000000
Verifying Checksum ... OK
## Loading init Ramdisk from Legacy Image at ff980000 ...
Image Name: Simple Embedded Linux Framework
Image Type: PowerPC Linux RAMDisk Image (gzip compressed)
Data Size: 1730966 Bytes = 1.7 MB
Load Address: 00000000
Entry Point: 00000000
Verifying Checksum ... OK
Uncompressing Kernel Image ... OK
Loading Ramdisk to 039d7000, end 03b7d996 ... OK
U-Boot 2009.01 (Jan 14 2009 - 18:38:32)
MPC8272 Reset Status: Check Stop, External Soft, External Hard
MPC8272 Clock Configuration
- Bus-to-Core Mult 4x, VCO Div 2, 60x Bus Freq 25-75 , Core Freq 100-300
- dfbrg 1, corecnf 0x1a, busdf 3, cpmdf 1, plldf 0, pllmf 3, pcidf 5
- vco_out 400000000, scc_clk 100000000, brg_clk 25000000
- cpu_clk 400000000, cpm_clk 200000000, bus_clk 100000000
- pci_clk 66666666
CPU: MPC8272 (HiP7 Rev 14, Mask 1.0 1K50M) at 400 MHz
Board: Motorola MPC8272ADS
DRAM: 64 MB
FLASH: 8 MB
In: serial
Out: serial
Err: serial
Net: FCC1 ETHERNET
Hit any key to stop autoboot: 0
=>
Thanks in advance for your help !
[-- Attachment #2: Type: text/html, Size: 2541 bytes --]
next reply other threads:[~2009-01-15 11:42 UTC|newest]
Thread overview: 28+ messages / expand[flat|nested] mbox.gz Atom feed top
2009-01-15 11:42 Jean-Michel Hautbois [this message]
2009-01-15 12:52 ` [MPC8272ADS]Cannot start my Linux Kernel Anatolij Gustschin
2009-01-15 13:10 ` Jean-Michel Hautbois
2009-01-15 14:25 ` Anatolij Gustschin
2009-01-15 15:06 ` Jean-Michel Hautbois
2009-01-16 12:06 ` Jean-Michel Hautbois
2009-01-16 17:29 ` Scott Wood
2009-01-16 17:40 ` Jean-Michel Hautbois
2009-01-16 17:44 ` Jean-Michel Hautbois
2009-01-16 17:53 ` Jean-Michel Hautbois
2009-01-16 18:02 ` Scott Wood
2009-01-16 18:23 ` Jean-Michel Hautbois
2009-01-20 10:56 ` Jean-Michel Hautbois
2009-01-20 16:27 ` Jean-Michel Hautbois
2009-01-20 17:51 ` Scott Wood
2009-01-20 16:31 ` Scott Wood
2009-01-20 17:05 ` Jean-Michel Hautbois
2009-01-20 17:16 ` Scott Wood
2009-01-20 17:32 ` Jean-Michel Hautbois
2009-01-20 17:35 ` Scott Wood
2009-01-21 15:42 ` jeff angielski
2009-01-21 16:15 ` Jean-Michel Hautbois
2009-01-22 2:15 ` Daniel Ng99
2009-01-22 17:36 ` Scott Wood
2009-01-23 0:21 ` Daniel Ng99
2009-01-23 0:46 ` Daniel Ng99
2009-01-23 16:17 ` Scott Wood
2009-01-22 2:17 ` Daniel Ng99
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=8cad0aa0901150342s2362e53bqf9472c1dc239636c@mail.gmail.com \
--to=jhautbois@gmail.com \
--cc=linuxppc-dev@ozlabs.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).