From: Jean-Michel Hautbois <jhautbois@gmail.com>
To: Scott Wood <scottwood@freescale.com>
Cc: linuxppc-dev@ozlabs.org
Subject: Re: [MPC8272ADS]Cannot start my Linux Kernel
Date: Fri, 16 Jan 2009 19:23:28 +0100 [thread overview]
Message-ID: <8cad0aa0901161023u382e3973w917e8fb6da8b7207@mail.gmail.com> (raw)
In-Reply-To: <4970CBA9.60809@freescale.com>
2009/1/16 Scott Wood <scottwood@freescale.com>:
> Jean-Michel Hautbois wrote:
>>
>> OK, I just tried a make of my kernel (already compiled yesterday), and
>> it generated a cuImage.mpc8272ads kernel image (which it didn't do
>> yesterday).
>> I don't know why this image was generated, but I tried to reboot using
>> this one.
>
> Use uImage if you are providing a device tree from u-boot. cuImage is for
> older u-boots that don't support this, though you could still try using it
> on a modern u-boot with a one- or two-argument bootm command to try to
> isolate the problem.
>
> -Scott
>
Well it seems to be a (very) bad idea to use ucImage, because I cannot
have my u-boot prompt after resetting my board...
My LEDs are blinking (LD4 and LD 9) and my LD20 is off (when it should be on).
I am blocked (without the prompt on my serial line !).
JM
next prev parent reply other threads:[~2009-01-16 18:23 UTC|newest]
Thread overview: 28+ messages / expand[flat|nested] mbox.gz Atom feed top
2009-01-15 11:42 [MPC8272ADS]Cannot start my Linux Kernel Jean-Michel Hautbois
2009-01-15 12:52 ` Anatolij Gustschin
2009-01-15 13:10 ` Jean-Michel Hautbois
2009-01-15 14:25 ` Anatolij Gustschin
2009-01-15 15:06 ` Jean-Michel Hautbois
2009-01-16 12:06 ` Jean-Michel Hautbois
2009-01-16 17:29 ` Scott Wood
2009-01-16 17:40 ` Jean-Michel Hautbois
2009-01-16 17:44 ` Jean-Michel Hautbois
2009-01-16 17:53 ` Jean-Michel Hautbois
2009-01-16 18:02 ` Scott Wood
2009-01-16 18:23 ` Jean-Michel Hautbois [this message]
2009-01-20 10:56 ` Jean-Michel Hautbois
2009-01-20 16:27 ` Jean-Michel Hautbois
2009-01-20 17:51 ` Scott Wood
2009-01-20 16:31 ` Scott Wood
2009-01-20 17:05 ` Jean-Michel Hautbois
2009-01-20 17:16 ` Scott Wood
2009-01-20 17:32 ` Jean-Michel Hautbois
2009-01-20 17:35 ` Scott Wood
2009-01-21 15:42 ` jeff angielski
2009-01-21 16:15 ` Jean-Michel Hautbois
2009-01-22 2:15 ` Daniel Ng99
2009-01-22 17:36 ` Scott Wood
2009-01-23 0:21 ` Daniel Ng99
2009-01-23 0:46 ` Daniel Ng99
2009-01-23 16:17 ` Scott Wood
2009-01-22 2:17 ` Daniel Ng99
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=8cad0aa0901161023u382e3973w917e8fb6da8b7207@mail.gmail.com \
--to=jhautbois@gmail.com \
--cc=linuxppc-dev@ozlabs.org \
--cc=scottwood@freescale.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).