Re: [MPC8272ADS]Problem adding flash partitions inside the device tree

[Jean-Michel Hautbois <jhautbois@gmail.com>]

[-- Attachment #1: Type: text/plain, Size: 1502 bytes --]

2009/2/12 Pieter <phenning@vastech.co.za>

> Jean-Michel Hautbois wrote:
> > Warning (reg_format): "reg" property in
> > /localbus@f0010100/flash@0,0/partition@ff800000 has invalid length (8
> > JM
> You are missing some definitions, The #address-cells and #size-cells = <1>;
> tis is a snippet of teh dts i defined for my board.
>
>        flash@0,0 {
>            #address-cells = <1>;
>            #size-cells = <1>;
>            compatible = "cfi-flash";
>            reg = <0x0 0x0 0x08000000>;
>             bank-width = <4>;
>            device-width = <1>;
>
>             /* set flash partition to correspond tu mtd parts in
> u-boot*/
>            /*     0xf8000000 */
>            partition@0x0 {
>                label = "factory-image";
>                reg = <0x00000000 0x01000000>;
>            };
>            /*     0xf9000000 */
>            partition@0x01000000 {
>                label = "app-image-1";
>                reg = <0x01000000 0x01000000>;
>            };
> cheers pieter
>

Hi do have these definitions, at a higher level:
 localbus@f0010100 {
                compatible = "fsl,mpc8272-localbus",
                             "fsl,pq2-localbus";
                #address-cells = <2>;
                #size-cells = <1>;
                reg = <0xf0010100 0x40>;

                ranges = <0x0 0x0 0xfe000000 0x2000000
                          0x1 0x0 0xf4500000 0x8000
                          0x3 0x0 0xf8200000 0x8000>;

                flash@0,0 {
etc.

Regards,
JM

[-- Attachment #2: Type: text/html, Size: 3629 bytes --]