From: Jean-Michel Hautbois <jhautbois@gmail.com>
To: linuxppc-dev@ozlabs.org
Subject: [MPC8272ADS]Can not configure the ttyCPM0
Date: Fri, 13 Mar 2009 14:38:55 +0100 [thread overview]
Message-ID: <8cad0aa0903130638w6fab6299kcd23d92d4c2d0a8@mail.gmail.com> (raw)
Hi all !
I am currently facing a big problem on my MPC8272ADS development board.
I have tried to use the /dev/ttyCPM1 port in order to send data over
the serial cable to another device.
This is just not working but nothing is sent, my DTR signal is down:
> cat /proc/tty/driver/ttyCPM
0: uart:CPM UART mmio:0xF0011A00 irq:40 tx:296 rx:0 RTS|CTS|DTR|DSR|CD
1: uart:CPM UART mmio:0xF0011A60 irq:43 tx:0 rx:0 CTS|DSR|CD
So, I have tried to use the serial port /dev/ttyCPM0. It is
successfully sending out my bytes, but I can't configure it !!
When I am trying to use the tcsetattr() function, I don't have any
error, but the signal is always the same (no effect, if you prefer).
I have tried to disable the kernel console output, but it is not
working, either...
Can anyone help me ?
Thanks in advance !
Best Regards,
JM
next reply other threads:[~2009-03-13 13:38 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2009-03-13 13:38 Jean-Michel Hautbois [this message]
2009-03-13 14:00 ` [MPC8272ADS]Can not configure the ttyCPM0 Laurent Pinchart
2009-03-13 14:20 ` Jean-Michel Hautbois
2009-03-13 14:38 ` Laurent Pinchart
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=8cad0aa0903130638w6fab6299kcd23d92d4c2d0a8@mail.gmail.com \
--to=jhautbois@gmail.com \
--cc=linuxppc-dev@ozlabs.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).