From mboxrd@z Thu Jan 1 00:00:00 1970 From: Jens Schwepe To: linuxppc-dev@lists.linuxppc.org Subject: imac+elotouch Date: Mon, 13 Sep 1999 16:36:18 +0200 Content-Type: text/plain MIME-Version: 1.0 Message-Id: <99091316543101.02957@merlin> Sender: owner-linuxppc-dev@lists.linuxppc.org List-Id: Hi, here we´ve got an iMac running current linuxppc-R5 with an Elo touchscreen attached to usb-hub by a KeySpan serial/usb adapter. There´s a (serial) module coming with normal X11, so I guess I just have to find the right usb-port to use in the XF86-config. I just hope that my guess was right, or do I have to use/program a special usb-module to add to the kernel ? I´m curious about that because of the Kernel Messages that follow: (I cut out alot for your convenience) -device tree used 35168 bytes -Total memory = 96MB; using 512kB for hash table (at c0280000) -Linux version 2.2.6-15apmac (root@video.linuxppc.org) (gcc version -egcs-2.91.66 19990314 (egcs-1.1.2 release)) #1 Mon May 31 03:54:09 EDT 1999 -USB: Universal USB Driver v$Revision: 1.60 $ USB-OHCI: USB Open Host Controller -Interface Driver USB-OHCI: Disabling OHCI legacy support on controller -0xc5fd7140 USB-HUBM: Root hub at host 0 -USB-OHCI: Host Controller 0xc5fd7020 (0) at PCI bus 0 dev 20 fn 0 initialized -USB-HUBD: UUSBD Hub Driver v$Revision: 1.36 $ -USB-HIDD: USB Human Interface Devices Driver v$Revision: 1.6 $ -USB-HIDBP: USB HID Boot Protocol Driver v$Revision: 1.10 $ -USB-HUBM: Starting kusbdd (pid 2) -USB-HUBM: Device attachment detected on port 0 of hub 0xc5fd7040 (0 -1) -USBD: Device id 0x80d59b8 (0 1) at port 0, hub (0 -1): (no information -available) USB-HUBM: Hub at device id 0x080d59b8 (0 1), port 0 -USB-HUBM: Device attachment detected on port 1 of hub 0xc5fd7040 (0 -1) -USB-HUBM: Ran out of hub queuing slots [with 5] -USBD: Device id 0xe9471e58 (0 2) at port 1, hub (0 -1): Elo TouchSystems, -Inc. Elo TouchSystems USB Touchscreen s/n 9800005C USB-HIDBP: Pretended to -configure as HID Boot Protocol non-HIDBP class interface 0 of device (0 2) -USB-HIDD: No physical descriptors on interface 0 of device id 0xe9471e58 (0 2) -request_module[usb-hidd-parser]: Root fs not mounted USB-HIDD: Cannot load HID -parser for processing HID report descriptors on interface 0 of device id -0xe9471e58 (0 2) USB: generic.c:138: Assertion failed: -((&tr->snode.usecnt)->counter) == 0 USBD: Error while trying to configure -device (0 2) with driver `USB Human Interface Devices Driver v$Revision: 1.6 $' -(0xc5fdb900): errno/usb -1/0. Trying next USBD: Device 0xc5fae240 (0 2) could -not be configured; newly loaded drivers will try to configure it USB-HUBM: -Device attachment detected on port 0 of hub 0xc5fae120 (0 1) USBD: Device id -0xc3e494bb (0 3) at port 0, hub (0 1): Alps Electric M2452 USB-HIDBP: HID Boot -Protocol Keyboard at interface 0 of device (0 3) USB-HUBM: Device attachment -detected on port 1 of hub 0xc5fae120 (0 1) USBD: Device id 0x6411c619 (0 4) at -port 1, hub (0 1): Logitech M4848 USB-HIDBP: HID Boot Protocol Mouse at -interface 0 of device (0 4) USBD: 1 USB host found thnx alot for your interest -- __________________________________ Jens Schwepe Ahlhorner Str. 57A 27793 Wildeshausen Tel.: 04431-92833 FAX : 04431-92834 Funk: 0172-4443443 Email: schwepe@stonehenge.de "Mutter ist der Name fuer Gott auf den Lippen und in den Herzen der Kinder dieser Welt." (THE CROW) ___________________________________ ** Sent via the linuxppc-dev mail list. See http://lists.linuxppc.org/