From: Marco Reichwald <marcoppc@gmx.net>
To: linuxppc-dev@lists.linuxppc.org
Subject: mol hangs at startup
Date: Wed, 27 Oct 1999 20:40:35 -0400 [thread overview]
Message-ID: <99102720415501.00801@marco> (raw)
I tried to run MoL on my beige G3 without luck. (I'm using an unpatched generic
2.2.13 Kernel)
I don't no much about asm but when I use the debugger, mol seems
to be caught in a endless-loop between adress 0x0 and the "Trap_700_Program"
(whatever this is)
I get no error messages and no video output, it just hangs.
I tried to disable everything and boot from an "Disk Tools" floppy image. Same
problem.
Any ideas?
Mac-on-Linux 0.9.22
(C) 1997-1999 Samuel Rydh, <samuel@ibrium.se>
Using resource file '/etc/molrc'
in_security_mode 0
MOL kernel module 1.1.22
OF Device tree copied from kernel
Loading OF device tree from 'oftrees/oftree.8500'
32MB RAM mapped at 0x20000000
4096K ROM mapped at 0x4fc00000 from 'rom/rom.g3'
ROM checksum = 0x134
Running in PowerPC 604 mode
DEC frequency: 0x00fee5e8 (16 MHx), 167:10 mticks/usec
Running on VT 8.
Using console mouse driver
Initing PCI bus services
PCI-bridge 'bandit' (bus 0..0) installed at 0xf2000000
PCI-bridge 'chaos' (bus 1..1) installed at 0xf0000000
GC, Grand Central, (0:16) found
Descriptor based DMA services inited
Using nvram-image 'nvram/nvram.8500.image'
Floppy image 'images/floppy' used for drive A.
Swim3 floppy driver installed
AWACS disabled
Hammerhead driver installed
Control driver disabled (no pci entry added)
osi_enet: *** OSI ENET DISABLED**
53c94 SCSI-driver installed (IRQs 12/0)
Could not register MESH SCSI unit. Need a second bus ??
SCSI-Disk (hw-0): 0 MB
driver_mgr_list: hacks console pci gc pic dbdma via-cuda adb nvram escc swim3 hammerhead mol_video scsi
Starting emulation...
here it hangs
------------------------------------------------
hooray for captain spalding!
-------------------------------------------------------
--
------------------------------------------------
hooray for captain spalding!
** Sent via the linuxppc-dev mail list. See http://lists.linuxppc.org/
reply other threads:[~1999-10-28 0:40 UTC|newest]
Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=99102720415501.00801@marco \
--to=marcoppc@gmx.net \
--cc=linuxppc-dev@lists.linuxppc.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).