From mboxrd@z Thu Jan 1 00:00:00 1970 From: Marco Reichwald To: linuxppc-dev@lists.linuxppc.org Subject: mol hangs at startup Date: Wed, 27 Oct 1999 20:40:35 -0400 Content-Type: text/plain MIME-Version: 1.0 Message-Id: <99102720415501.00801@marco> Sender: owner-linuxppc-dev@lists.linuxppc.org List-Id: I tried to run MoL on my beige G3 without luck. (I'm using an unpatched generic 2.2.13 Kernel) I don't no much about asm but when I use the debugger, mol seems to be caught in a endless-loop between adress 0x0 and the "Trap_700_Program" (whatever this is) I get no error messages and no video output, it just hangs. I tried to disable everything and boot from an "Disk Tools" floppy image. Same problem. Any ideas? Mac-on-Linux 0.9.22 (C) 1997-1999 Samuel Rydh, Using resource file '/etc/molrc' in_security_mode 0 MOL kernel module 1.1.22 OF Device tree copied from kernel Loading OF device tree from 'oftrees/oftree.8500' 32MB RAM mapped at 0x20000000 4096K ROM mapped at 0x4fc00000 from 'rom/rom.g3' ROM checksum = 0x134 Running in PowerPC 604 mode DEC frequency: 0x00fee5e8 (16 MHx), 167:10 mticks/usec Running on VT 8. Using console mouse driver Initing PCI bus services PCI-bridge 'bandit' (bus 0..0) installed at 0xf2000000 PCI-bridge 'chaos' (bus 1..1) installed at 0xf0000000 GC, Grand Central, (0:16) found Descriptor based DMA services inited Using nvram-image 'nvram/nvram.8500.image' Floppy image 'images/floppy' used for drive A. Swim3 floppy driver installed AWACS disabled Hammerhead driver installed Control driver disabled (no pci entry added) osi_enet: *** OSI ENET DISABLED** 53c94 SCSI-driver installed (IRQs 12/0) Could not register MESH SCSI unit. Need a second bus ?? SCSI-Disk (hw-0): 0 MB driver_mgr_list: hacks console pci gc pic dbdma via-cuda adb nvram escc swim3 hammerhead mol_video scsi Starting emulation... here it hangs ------------------------------------------------ hooray for captain spalding! ------------------------------------------------------- -- ------------------------------------------------ hooray for captain spalding! ** Sent via the linuxppc-dev mail list. See http://lists.linuxppc.org/