From: "Jon Smirl" <jonsmirl@gmail.com>
To: "Timur Tabi" <timur@freescale.com>
Cc: linuxppc-dev@ozlabs.org, alsa-devel@alsa-project.org
Subject: Re: [PATCH] ASoC drivers for the Freescale MPC8610 SoC
Date: Tue, 1 Jan 2008 12:25:32 -0500 [thread overview]
Message-ID: <9e4733910801010925j67192427o4e0e824b9d7e0ad0@mail.gmail.com> (raw)
In-Reply-To: <11981089894052-git-send-email-timur@freescale.com>
On 12/19/07, Timur Tabi <timur@freescale.com> wrote:
> + ssi@16000 {
> + compatible = "fsl,ssi";
> + cell-index = <0>;
> + reg = <16000 100>;
> + interrupt-parent = <&mpic>;
> + interrupts = <3e 2>;
> + fsl,mode = "i2s-slave";
> + codec {
> + compatible = "cirrus,cs4270";
> + /* MCLK source is a stand-alone oscillator */
> + bus-frequency = <bb8000>;
> + };
> + };
Does this need to be bus-frequency? It's always called MCLK in all of
the literature.
In my case the MCLK comes from a chip on the i2c bus that is
programmable How would that be encoded?.
--
Jon Smirl
jonsmirl@gmail.com
next prev parent reply other threads:[~2008-01-01 17:25 UTC|newest]
Thread overview: 89+ messages / expand[flat|nested] mbox.gz Atom feed top
2007-12-20 0:03 [PATCH] ASoC drivers for the Freescale MPC8610 SoC Timur Tabi
2007-12-20 4:06 ` Olof Johansson
2007-12-20 14:24 ` Timur Tabi
2007-12-20 13:54 ` [alsa-devel] " Takashi Iwai
2007-12-20 17:04 ` Timur Tabi
2007-12-21 5:28 ` Lee Revell
2007-12-23 3:23 ` Timur Tabi
2007-12-20 22:39 ` Olof Johansson
2007-12-20 22:37 ` Timur Tabi
2007-12-20 22:43 ` Scott Wood
2007-12-23 2:58 ` Timur Tabi
2008-01-02 18:08 ` Scott Wood
2007-12-20 14:47 ` Jon Loeliger
2007-12-20 22:29 ` Jon Smirl
2007-12-20 22:32 ` Timur Tabi
2007-12-20 22:38 ` Jon Smirl
2007-12-20 22:40 ` Timur Tabi
2007-12-20 22:44 ` Scott Wood
2007-12-20 23:13 ` Jon Smirl
2007-12-21 0:00 ` David Gibson
2008-01-01 17:25 ` Jon Smirl [this message]
2008-01-01 17:42 ` Jon Smirl
2008-01-02 15:19 ` Timur Tabi
2008-01-02 15:34 ` Jon Smirl
2008-01-03 17:54 ` Timur Tabi
2008-01-03 18:13 ` Grant Likely
2008-01-03 18:20 ` Timur Tabi
2008-01-03 18:32 ` Grant Likely
2008-01-03 23:51 ` David Gibson
2008-01-05 2:39 ` [alsa-devel] " Timur Tabi
2008-01-06 0:46 ` David Gibson
2008-01-07 14:24 ` Mark Brown
2008-01-07 15:52 ` Timur Tabi
2008-01-07 18:28 ` Mark Brown
2008-01-10 3:49 ` David Gibson
2008-01-10 5:41 ` Jon Smirl
2008-01-10 10:30 ` Liam Girdwood
2008-01-10 15:39 ` Timur Tabi
2008-01-10 16:01 ` Grant Likely
2008-01-10 16:03 ` Timur Tabi
2008-01-10 20:10 ` Jon Smirl
2008-01-10 20:13 ` Timur Tabi
2008-01-10 20:24 ` Grant Likely
2008-01-10 20:35 ` Timur Tabi
2008-01-10 20:39 ` Jon Smirl
2008-01-10 20:44 ` Timur Tabi
2008-01-07 18:44 ` Liam Girdwood
2008-01-07 18:45 ` Timur Tabi
2008-01-02 16:12 ` Grant Likely
2008-01-03 18:08 ` Timur Tabi
2008-01-03 18:17 ` Grant Likely
2008-01-03 18:54 ` Scott Wood
2008-01-03 19:13 ` Grant Likely
2008-01-03 19:18 ` Scott Wood
2008-01-03 23:13 ` [alsa-devel] " Mark Brown
2008-01-05 2:35 ` Timur Tabi
2008-01-05 3:28 ` Grant Likely
2008-01-02 0:26 ` David Gibson
2008-01-02 15:10 ` Timur Tabi
2008-01-02 17:23 ` [alsa-devel] " Mark Brown
2008-01-03 18:23 ` Timur Tabi
2008-01-03 23:00 ` Mark Brown
2008-01-05 2:43 ` Timur Tabi
2008-01-07 13:37 ` Mark Brown
2008-01-02 4:27 ` Jon Smirl
2008-01-02 15:29 ` Timur Tabi
2008-01-02 15:56 ` Jon Smirl
2008-01-02 16:32 ` Grant Likely
2008-01-02 17:12 ` Jon Smirl
2008-01-02 17:22 ` Grant Likely
2008-01-02 18:43 ` Jon Smirl
2008-01-02 18:50 ` Grant Likely
2008-01-02 18:56 ` Jon Smirl
2008-01-03 4:46 ` David Gibson
2008-01-03 14:33 ` Jon Smirl
2008-01-03 17:57 ` Timur Tabi
2008-01-02 16:28 ` Grant Likely
2008-01-02 18:49 ` [alsa-devel] " Mark Brown
2008-01-03 18:16 ` Timur Tabi
2008-01-03 23:47 ` David Gibson
2008-01-04 13:39 ` Mark Brown
2008-01-03 18:14 ` Timur Tabi
2008-01-03 18:25 ` Grant Likely
2008-01-03 18:28 ` Timur Tabi
2008-01-03 18:38 ` Grant Likely
2008-01-03 4:44 ` David Gibson
2008-01-03 14:54 ` Jon Smirl
2008-01-04 5:01 ` David Gibson
2008-01-03 18:16 ` Timur Tabi
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=9e4733910801010925j67192427o4e0e824b9d7e0ad0@mail.gmail.com \
--to=jonsmirl@gmail.com \
--cc=alsa-devel@alsa-project.org \
--cc=linuxppc-dev@ozlabs.org \
--cc=timur@freescale.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).