Re: can't boot mpc5200, powerpc: Enable AT_BASE_PLATFORM aux vector

["Jon Smirl" <jonsmirl@gmail.com>]

On 7/25/08, Jon Smirl <jonsmirl@gmail.com> wrote:
> On 7/25/08, Benjamin Herrenschmidt <benh@kernel.crashing.org> wrote:
>  > On Fri, 2008-07-25 at 17:00 -0500, Nathan Lynch wrote:
>  >  > Jon Smirl wrote:
>  >  > > I've lost my ability to boot on the mpc5200. Reverting this patch fixes it.
>  >  >
>  >  > How does it fail?
>  >  >
>  >  >
>  >  > > @@ -1652,6 +1655,14 @@ struct cpu_spec * __init identify_cpu(unsigned
>  >  > > long offset, unsigned int pvr)
>  >  > >                     } else
>  >  > >                             *t = *s;
>  >  > >                     *PTRRELOC(&cur_cpu_spec) = &the_cpu_spec;
>  >  > > +
>  >  > > +                   /*
>  >  > > +                    * Set the base platform string once; assumes
>  >  > > +                    * we're called with real pvr first.
>  >  > > +                    */
>  >  > > +                   if (powerpc_base_platform == NULL)
>  >  > > +                           powerpc_base_platform = t->platform;
>  >  > > +
>  >  >
>  >  > Hmm, maybe this needs RELOC/PTRRELOC tricks?
>  >
>  >
>  > Hrm... indeed.
>  >
>  >  if (RELOC(powerpc_base_platform))
>  >         RELOC(powerpc_base_platform) = t->platform;

This boots:

#define RELOC(x)        (*PTRRELOC(&(x)))
			if (RELOC(powerpc_base_platform))
			       RELOC(powerpc_base_platform) = t->platform;


>
>
> It completely fails booting, no console or anything.
>
>  Where is RELOC defined, prom_init.c?
>
>  #ifdef CONFIG_PPC64
>  #define RELOC(x)        (*PTRRELOC(&(x)))
>  #define ADDR(x)         (u32) add_reloc_offset((unsigned long)(x))
>  #define OF_WORKAROUNDS  0
>  #else
>  #define RELOC(x)        (x)
>  #define ADDR(x)         (u32) (x)
>  #define OF_WORKAROUNDS  of_workarounds
>  int of_workarounds;
>  #endif
>
>
>
>  >
>  >  try that.
>  >
>  >  Ben.
>
> >
>  >
>  >
>
>
>  --
>  Jon Smirl
>  jonsmirl@gmail.com
>


-- 
Jon Smirl
jonsmirl@gmail.com