From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Received: from yx-out-2324.google.com (yx-out-2324.google.com [74.125.44.30]) by ozlabs.org (Postfix) with ESMTP id C509EDDF19 for ; Sat, 7 Mar 2009 13:01:28 +1100 (EST) Received: by yx-out-2324.google.com with SMTP id 8so370683yxb.39 for ; Fri, 06 Mar 2009 18:01:26 -0800 (PST) MIME-Version: 1.0 In-Reply-To: <20090303081212.GL5367@pengutronix.de> References: <20090301101815.GC23093@pengutronix.de> <9e4733910903010754q1b4d9fafy87668049653d5e21@mail.gmail.com> <9e4733910903011637q246eb82al140e87242f695413@mail.gmail.com> <9e4733910903011646g43b151c2m7c6dfe80ac07e80a@mail.gmail.com> <9e4733910903011815q1a956be0x137bac80f2e21e72@mail.gmail.com> <9e4733910903011819q105a856n163ccd8fee37d980@mail.gmail.com> <20090303081212.GL5367@pengutronix.de> Date: Fri, 6 Mar 2009 21:01:25 -0500 Message-ID: <9e4733910903061801w3a9661acm3e8855abb743d3e0@mail.gmail.com> Subject: Re: [PATCH] powerpc/mpc52xx: add Phytec phyCORE-MPC5200B-IO board (pcm032) From: Jon Smirl To: Robert Schwebel Content-Type: text/plain; charset=ISO-8859-1 Cc: linuxppc-dev@ozlabs.org, Wolfram Sang List-Id: Linux on PowerPC Developers Mail List List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , On Tue, Mar 3, 2009 at 3:12 AM, Robert Schwebel wrote: > On Sun, Mar 01, 2009 at 09:33:16PM -0700, Grant Likely wrote: >> On Sun, Mar 1, 2009 at 7:19 PM, Jon Smirl wrote: >> > Would it be easier to get Pengutronix to release a new u-boot for >> > the pcm030? I'm using U-Boot 1.2.0-mpc5200b-tiny-2 (Apr 17 2007 - >> > 11:49:20). >> >> Only if it is a chip IO setup problem (like port_config or clock >> setup). Otherwise the kernel should be setting up the PCI controller >> correctly. Regardless, I don't think the kernel should be crashing >> when PCI is in a funny state. > > Ack; I didn't follow the thread in detail, but if possible I'd like to > avoid bootloader updates; it's quite a lot of effort because there are > thousends of devices in the field, not to mention the whole > qualification mechanics at Phytec. On a pcm030 1245-1 u-boot-1.2.0-mpc5200b-tiny-3, boots ok and PCI is initialized correctly. The readme is not clear that tiny-3 should be used on 1245.1 hardware. http://www.pengutronix.de/oselas/bsp/phytec/download/phyCORE-MPC5200B-tiny/= Readme This phrase implies the tiny-3 should only be used on 1245.2 hardware. "U-Boot binary to be used with OSELAS.BSP-Phytec-phyCORE-MPC5200B-tiny-6 (board revision 1245.2)" Where is the difference between the 1245.0, 1245.1 and 1245.2 hardware documented? > > Wolfram can check the issue when being back in the office. > > rsc > -- > Pengutronix e.K. =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 | = =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 | > Industrial Linux Solutions =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 | http://www.p= engutronix.de/ =A0| > Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0 =A0= =A0| > Amtsgericht Hildesheim, HRA 2686 =A0 =A0 =A0 =A0 =A0 | Fax: =A0 +49-5121-= 206917-5555 | > --=20 Jon Smirl jonsmirl@gmail.com