messages from 2003-05-14 15:43:10 to 2003-05-27 23:57:52 UTC [more...]
Problem booting kernel on EP405
2003-05-27 23:57 UTC (3+ messages)
MPC8266ADS missing every other character on the console port; u-boot 0.3.0, eldk, kernel 2.4.4
2003-05-27 20:18 UTC
PATCH: arch/ppc/8xx_io_fec.c
2003-05-27 20:13 UTC (4+ messages)
getting Linux working on IBM Walnut demo board
2003-05-27 19:53 UTC (2+ messages)
PATCH: arch/ppc/8xx_io_fec.c
2003-05-27 19:47 UTC
[MPC8260] accessing I/Os while MMU is off
2003-05-27 8:41 UTC (5+ messages)
Walnut405GP Board - Reg
2003-05-27 6:04 UTC
lost interrupt
2003-05-27 3:41 UTC
PCI interrupt masking, CSR on the MPC8250
2003-05-26 18:13 UTC
[announce] driver universe
2003-05-26 13:07 UTC
PCI interrupt masking, CSR on the MPC8250
2003-05-26 12:37 UTC
ide interrupts
2003-05-26 6:47 UTC (5+ messages)
GPL inconsistency in arch/ppc/ocp/xlinx/
2003-05-25 12:01 UTC (2+ messages)
slow in user space?
2003-05-24 23:02 UTC (3+ messages)
BK/glibc 2.1?
2003-05-24 20:23 UTC
MPC8250 + PCMCIA + airo_cs card + IO Port mapping proble
2003-05-23 22:44 UTC (4+ messages)
ERR51 / ERR77 on IBM405GPr
2003-05-23 22:28 UTC (3+ messages)
linuxppc_2_4_devel patch for gt64260_mpsc
2003-05-23 17:41 UTC (3+ messages)
linuxppc_2_4_devel patch for gt64260_eth
2003-05-23 16:03 UTC (2+ messages)
ELDK and Red Hat Linux 9 ???
2003-05-23 8:32 UTC
MPC8260 Enhanced SAR supplement ?
2003-05-23 6:15 UTC (2+ messages)
help: why show "Oops: kernel access of bad area, sig: 11"
2003-05-23 1:01 UTC (3+ messages)
` Linux booting on FADS823 board
linuxppc_2_4_devel patch for cpci690
2003-05-22 23:30 UTC
linuxppc_2_4_devel patch to add KGDB support to gt64260 MPSC
2003-05-22 23:28 UTC
linuxppc_2_4_devel patch to arch/ppc/kernel/setup.c
2003-05-22 23:19 UTC
MPC8250 + PCMCIA + airo_cs card + IO Port mapping problem?
2003-05-22 19:29 UTC (3+ messages)
unresolved symbol after doing make modules_install
2003-05-22 17:31 UTC
Machine Check question
2003-05-22 4:29 UTC (4+ messages)
how to kernel booting on MCP750 board
2003-05-22 3:59 UTC (4+ messages)
Semi hosting with BDI2000 BDM ?
2003-05-22 1:50 UTC (2+ messages)
e1000 patch for linuxppc_2_4_devel
2003-05-21 22:10 UTC (6+ messages)
u-boot-0.3.0 + Linux boot failed on walnut
2003-05-21 19:47 UTC (3+ messages)
perl under eldk for ppc8xx
2003-05-21 17:26 UTC (13+ messages)
` Re[2]: "
` Kernel parameters (Sandpoint X3 with Altimus MPC755)
Virtex II Pro eval Boards
2003-05-21 16:43 UTC (8+ messages)
help: why show "Oops: kernel access of bad area, sig: 11"
2003-05-21 1:51 UTC (2+ messages)
Where can I find driver for mpc8250 or mpc8266 ?
2003-05-20 23:41 UTC (2+ messages)
How to configure video parameters on Mandrake 9.1 PPC install
2003-05-20 22:01 UTC
Flash device identifier error in jedec_probe.c
2003-05-20 19:26 UTC
How to set connection timeout with sockets
2003-05-20 19:25 UTC
Oh no! . . . "Embedded Linux" doesn't exist
2003-05-20 15:10 UTC
ssh on ppc 405gp?
2003-05-20 13:34 UTC (4+ messages)
Does ELDK include SELF?
2003-05-20 12:53 UTC
Pointless ppc_md hook
2003-05-20 8:16 UTC
Early malloc function (MPC826x) ??
2003-05-20 7:48 UTC (2+ messages)
Does ELDK include SELF?
2003-05-20 6:22 UTC (2+ messages)
How to set connection timeout with sockets
2003-05-20 6:09 UTC
Semi hosting with BDI2000 BDM ?
2003-05-19 22:57 UTC
64260/PCI accesses cached by CPU?
2003-05-19 19:36 UTC
64260/PCI accesses cached by CPU?
2003-05-19 19:24 UTC (4+ messages)
ssh on ppc 405gp?
2003-05-19 19:17 UTC (3+ messages)
zarlink MT90870 linux device driver
2003-05-19 10:00 UTC
Re[4]: How to change Bus speed for MPC8xx CPU
2003-05-18 16:16 UTC
How to change Bus speed for MPC8xx CPU
2003-05-18 10:43 UTC (4+ messages)
` Re[2]: "
How to change Bus speed for MPC8xx CPU
2003-05-18 10:42 UTC
kermit:How to disable the flow control signals?
2003-05-18 10:21 UTC (2+ messages)
kermit:How to disable the flow control signals?
2003-05-17 17:07 UTC (2+ messages)
kermit:How to disable the flow control signals?
2003-05-17 7:29 UTC (2+ messages)
Virtex II Pro eval Boards
2003-05-17 0:11 UTC
Virtex II Pro eval Boards
2003-05-16 22:42 UTC
IBM PowerPC 403GCX Eval Kit
2003-05-16 22:00 UTC
linuxppc_2_4_devel: 2.4.20 rc2 - where's pImage build?
2003-05-16 21:24 UTC (4+ messages)
Best Linux/PPC compiler ?
2003-05-16 15:27 UTC (2+ messages)
address translation
2003-05-16 9:00 UTC (9+ messages)
[PATCH] floppy.h
2003-05-16 8:09 UTC
[PATCH] RTC_IRQ
2003-05-16 7:59 UTC
ATM drivers for MPC8266
2003-05-16 4:22 UTC (3+ messages)
[PATCH] educate users about x86 specific kludges instead of hiding thier ignorance
2003-05-16 3:10 UTC (5+ messages)
Hash_base
2003-05-15 22:20 UTC (2+ messages)
` Is PPC linux without page tables possible?
set_rtc_time() cleanup / normalization
2003-05-15 19:37 UTC (12+ messages)
ELDK build.sh seg faults
2003-05-15 18:06 UTC
IDE driver support in PPC440
2003-05-15 14:56 UTC (4+ messages)
How?
2003-05-15 14:03 UTC
How ?
2003-05-15 13:35 UTC (3+ messages)
Re : Can't find ext2 filesystem on dev mtdblock
2003-05-15 12:51 UTC (2+ messages)
RE : How ?
2003-05-15 12:27 UTC
set_rtc_time() cleanup / normalization
2003-05-15 10:45 UTC
Galnet-II+ / PowerPC 82xx support
2003-05-15 9:59 UTC
Can't find ext2 filesystem on dev mtdblock
2003-05-15 9:26 UTC
Problems with MMU: address translation for 0xXXXXXXXX failed
2003-05-15 6:34 UTC (2+ messages)
Memory used by kernel (fwd)
2003-05-15 5:42 UTC
address translation
2003-05-15 3:50 UTC
Problems with MMU: address translation for 0xXXXXXXXX failed
2003-05-15 0:23 UTC
Problems with MMU: address translation for 0xXXXXXXXX failed
2003-05-15 0:19 UTC
Problems with MMU: address translation for 0xXXXXXXXX failed
2003-05-14 23:52 UTC (3+ messages)
ELDK build.sh seg faults
2003-05-14 22:50 UTC
Problems with MMU: address translation for 0xXXXXXXXX failed
2003-05-14 21:46 UTC (2+ messages)
Abatron config file for Motorola 8266 VADS
2003-05-14 19:51 UTC
boot PPClinux on Sandpoint with Atlimus board
2003-05-14 17:42 UTC (2+ messages)
IDE driver support in PPC440
2003-05-14 16:09 UTC
page: next (older) | prev (newer) | latest
- recent:[subjects (threaded)|topics (new)|topics (active)]
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).