* FW: USB on MPC8349EMDS
@ 2006-05-02 17:57 Prashant Viswanathan
2006-05-02 18:19 ` Kumar Gala
0 siblings, 1 reply; 6+ messages in thread
From: Prashant Viswanathan @ 2006-05-02 17:57 UTC (permalink / raw)
To: linuxppc-embedded
Hi,
I have linux kernel (2.6.11) from Freescale running on the MPC8349EMDS.
I am using the BSP from Freescale which is supposed to have USB support.
However, I seem to be having problems with USB host support.
When I insert a USB Mass storage device (thumb drive), I get the
following errors
/ # usb 1-2: new high speed USB device using fsl-usb2-mph and address 8
usb 1-2: khubd timed out on ep0in
usb 1-2: new high speed USB device using fsl-usb2-mph and address 9
usb 1-2: khubd timed out on ep0in
It does not show up in /proc/bus/usb/devices (I do have usbfs mounted).
I also have usb-utils installed and lsusb fails to list the device.
I have also tried other USB devices and get similar errors.
Has anybody else experience similar problems? Any pointers/help will be
appreciated.
Thanks,
Prashant
^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: USB on MPC8349EMDS
2006-05-02 17:57 FW: USB on MPC8349EMDS Prashant Viswanathan
@ 2006-05-02 18:19 ` Kumar Gala
0 siblings, 0 replies; 6+ messages in thread
From: Kumar Gala @ 2006-05-02 18:19 UTC (permalink / raw)
To: Prashant Viswanathan; +Cc: linuxppc-embedded
On May 2, 2006, at 12:57 PM, Prashant Viswanathan wrote:
> Hi,
>
> I have linux kernel (2.6.11) from Freescale running on the
> MPC8349EMDS.
> I am using the BSP from Freescale which is supposed to have USB
> support.
>
> However, I seem to be having problems with USB host support.
>
> When I insert a USB Mass storage device (thumb drive), I get the
> following errors
>
> / # usb 1-2: new high speed USB device using fsl-usb2-mph and
> address 8
> usb 1-2: khubd timed out on ep0in
> usb 1-2: new high speed USB device using fsl-usb2-mph and address 9
> usb 1-2: khubd timed out on ep0in
>
> It does not show up in /proc/bus/usb/devices (I do have usbfs
> mounted).
>
> I also have usb-utils installed and lsusb fails to list the device.
>
> I have also tried other USB devices and get similar errors.
>
> Has anybody else experience similar problems? Any pointers/help
> will be
> appreciated.
I know there are some bugs in the Freescale driver that was released
as part of their BSP.
Are you using a PMC2USB module or just the USB ports on the SYS card?
- k
^ permalink raw reply [flat|nested] 6+ messages in thread
* RE: USB on MPC8349EMDS
@ 2006-05-02 18:52 Prashant Viswanathan
2006-05-02 19:50 ` Kumar Gala
0 siblings, 1 reply; 6+ messages in thread
From: Prashant Viswanathan @ 2006-05-02 18:52 UTC (permalink / raw)
To: Kumar Gala; +Cc: linuxppc-embedded
> > When I insert a USB Mass storage device (thumb drive), I get the
> > following errors
> >
> > / # usb 1-2: new high speed USB device using fsl-usb2-mph and
> > address 8
> > usb 1-2: khubd timed out on ep0in
> > usb 1-2: new high speed USB device using fsl-usb2-mph and address 9
> > usb 1-2: khubd timed out on ep0in
> >
> > It does not show up in /proc/bus/usb/devices (I do have usbfs
> > mounted).
> >
> > I also have usb-utils installed and lsusb fails to list the device.
> >
> > I have also tried other USB devices and get similar errors.
> >
> > Has anybody else experience similar problems? Any pointers/help
> > will be
> > appreciated.
>=20
> I know there are some bugs in the Freescale driver that was released
> as part of their BSP.
>=20
> Are you using a PMC2USB module or just the USB ports on the SYS card?
>=20
> - k
I am connecting to the USB port on the board using the USB adaptor. I
tried both configurations (MPH and DR).
I also tried the latest stable kernel (2.6.16.12) but that doesn't
compile for this board. Is there a later (later than 2.16.11) kernel out
there which works for this particular board?
Another possibility might be that the eval board I have is bad. I can't
seem to get my hands on the errata.
Also waiting to hear back from Freescale folks.
Prashant
^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: USB on MPC8349EMDS
2006-05-02 18:52 Prashant Viswanathan
@ 2006-05-02 19:50 ` Kumar Gala
0 siblings, 0 replies; 6+ messages in thread
From: Kumar Gala @ 2006-05-02 19:50 UTC (permalink / raw)
To: Prashant Viswanathan; +Cc: linuxppc-embedded ((((E-Mail))))
On May 2, 2006, at 1:52 PM, Prashant Viswanathan wrote:
>>> When I insert a USB Mass storage device (thumb drive), I get the
>>> following errors
>>>
>>> / # usb 1-2: new high speed USB device using fsl-usb2-mph and
>>> address 8
>>> usb 1-2: khubd timed out on ep0in
>>> usb 1-2: new high speed USB device using fsl-usb2-mph and address 9
>>> usb 1-2: khubd timed out on ep0in
>>>
>>> It does not show up in /proc/bus/usb/devices (I do have usbfs
>>> mounted).
>>>
>>> I also have usb-utils installed and lsusb fails to list the device.
>>>
>>> I have also tried other USB devices and get similar errors.
>>>
>>> Has anybody else experience similar problems? Any pointers/help
>>> will be
>>> appreciated.
>>
>> I know there are some bugs in the Freescale driver that was released
>> as part of their BSP.
>>
>> Are you using a PMC2USB module or just the USB ports on the SYS card?
>>
>> - k
>
> I am connecting to the USB port on the board using the USB adaptor. I
> tried both configurations (MPH and DR).
>
> I also tried the latest stable kernel (2.6.16.12) but that doesn't
> compile for this board. Is there a later (later than 2.16.11)
> kernel out
> there which works for this particular board?
>
> Another possibility might be that the eval board I have is bad. I
> can't
> seem to get my hands on the errata.
You'll need something like 2.6.16 plus a patch from Randy Vinson
(posted to the list a month or two ago).
- kumar
^ permalink raw reply [flat|nested] 6+ messages in thread
* RE: USB on MPC8349EMDS
@ 2006-05-02 19:26 Steven Blakeslee
2006-05-02 19:49 ` Kumar Gala
0 siblings, 1 reply; 6+ messages in thread
From: Steven Blakeslee @ 2006-05-02 19:26 UTC (permalink / raw)
To: Prashant Viswanathan, linuxppc-embedded
>=20
> / # usb 1-2: new high speed USB device using fsl-usb2-mph=20
> and address 8 usb 1-2: khubd timed out on ep0in usb 1-2: new=20
> high speed USB device using fsl-usb2-mph and address 9 usb=20
> 1-2: khubd timed out on ep0in
>=20
When I used that driver I found it only worked with Full speed devices.
Low and High speed devices did not work.
^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: USB on MPC8349EMDS
2006-05-02 19:26 Steven Blakeslee
@ 2006-05-02 19:49 ` Kumar Gala
0 siblings, 0 replies; 6+ messages in thread
From: Kumar Gala @ 2006-05-02 19:49 UTC (permalink / raw)
To: Steven Blakeslee; +Cc: linuxppc-embedded
On May 2, 2006, at 2:26 PM, Steven Blakeslee wrote:
>>
>> / # usb 1-2: new high speed USB device using fsl-usb2-mph
>> and address 8 usb 1-2: khubd timed out on ep0in usb 1-2: new
>> high speed USB device using fsl-usb2-mph and address 9 usb
>> 1-2: khubd timed out on ep0in
>>
>
> When I used that driver I found it only worked with Full speed
> devices.
> Low and High speed devices did not work.
Yeah, that was due to the bug in the driver if my memory serves me
correctly.
- k
^ permalink raw reply [flat|nested] 6+ messages in thread
end of thread, other threads:[~2006-05-02 19:50 UTC | newest]
Thread overview: 6+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2006-05-02 17:57 FW: USB on MPC8349EMDS Prashant Viswanathan
2006-05-02 18:19 ` Kumar Gala
-- strict thread matches above, loose matches on Subject: below --
2006-05-02 18:52 Prashant Viswanathan
2006-05-02 19:50 ` Kumar Gala
2006-05-02 19:26 Steven Blakeslee
2006-05-02 19:49 ` Kumar Gala
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).