From mboxrd@z Thu Jan 1 00:00:00 1970 Date: Wed, 31 Jan 2001 17:40:24 +0100 Subject: Re: mesh SCSI bus locks hard on 7500 when burning a CD-R in dao mode From: Chris Boot To: LinuxPPC Dev Message-ID: In-Reply-To: <20010130165710.B22219@allspice.cs.swarthmore.edu> Mime-version: 1.0 Content-type: text/plain; charset="US-ASCII" Sender: owner-linuxppc-dev@lists.linuxppc.org List-Id: >> It might be something PPC specific as well and have nothing to do with >> Paul's drivers. > > This is why I asked in a previous email whether anyone had ever burned > a disk in DAO mode successfully on a pmac or in fact on any powerpc > machine, but I've received no responses. Hmm, maybe I should try to > conduct a quick survey of this on linuxppc-user and/or debian-powerpc. Well, I can't write a dao disk on my Panasonic CW-7502. cdrecord complains that it can't send the cue sheet, but the SCSI bus doesn't die in any way, I can still mount and use disks on it afterwards (I only have the built-in CD-ROM and my CD-R on it). I can provide exactly what cdrecord says and any other info if you wish. This is on a Performa 5400/180 with an early pull of the 2.4.0 kernel from bk. Everything seems to be working fine, except for this (which isn't too important for me). Good luck, -- .-. Chris Boot /v\ bootc@worldnet.fr // \\ /( )\ L I N U X ^^-^^ >Phear the Penguin< ** Sent via the linuxppc-dev mail list. See http://lists.linuxppc.org/