From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Received: from bay0-omc3-s19.bay0.hotmail.com (bay0-omc3-s19.bay0.hotmail.com [65.54.246.219]) by ozlabs.org (Postfix) with ESMTP id 7BEF167B64 for ; Sat, 1 Jul 2006 06:07:33 +1000 (EST) Message-ID: In-Reply-To: <528646bc0606301302u5922945dycda569e6954fa353@mail.gmail.com> From: "Ming Liu" To: grant.likely@secretlab.ca Subject: Re: Xilinx SystemACE driver for 2.6 Date: Fri, 30 Jun 2006 20:07:30 +0000 Mime-Version: 1.0 Content-Type: text/plain; charset=gb2312; format=flowed Cc: linuxppc-embedded@ozlabs.org List-Id: Linux on Embedded PowerPC Developers Mail List List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Yes. I noticed that in the original demo Linux of MontaVista shipped by Xilinx for ML403, there is no swap partition. Regards Ming >From: "Grant Likely" >To: "Ameet Patil" >CC: "Ming Liu" , linuxppc-embedded@ozlabs.org >Subject: Re: Xilinx SystemACE driver for 2.6 >Date: Fri, 30 Jun 2006 14:02:28 -0600 > >On 6/30/06, Ameet Patil wrote: >>Here is PART I of the article: >>http://www.linux.get2knowmore.com/2006/06/30/quick-guide-linux-26-on-xilinx-virtex-ii-pro-boards-part-i/ >> >>Let me know if you get messages at boot time after following the >>above... > >Quick comment on your article; unless you're using a microdrive; >*PLEASE* don't recommend using compact flash as swap space. Flash >technology has limited write cycles (on the order of 100k to 1M >cycles >per block). Using it as swap is a great way to kill the lifecycle >of >your device. > >(the ML300 ships with a microdrive; the ML40x ships with a regular >CF card) > >I know the previous article also recommends a swap partition, but >Linux will happily run without swap. > >Cheers, >g. > >-- >Grant Likely, B.Sc. P.Eng. >Secret Lab Technologies Ltd. >grant.likely@secretlab.ca >(403) 399-0195 _________________________________________________________________ 与联机的朋友进行交流,请使用 MSN Messenger: http://messenger.msn.com/cn