From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Received: from hotmail.com (bay110-f2.bay110.hotmail.com [65.54.229.12]) by ozlabs.org (Postfix) with ESMTP id 0F53667A5B for ; Tue, 23 May 2006 19:41:32 +1000 (EST) Message-ID: From: "Ming Liu" To: rick.moleres@xilinx.com Subject: question about linux with Xilinx ML-403 Date: Tue, 23 May 2006 09:41:30 +0000 Mime-Version: 1.0 Content-Type: text/plain; charset=gb2312; format=flowed Cc: linuxppc-embedded@ozlabs.org List-Id: Linux on Embedded PowerPC Developers Mail List List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Hi Rick, > Yes, we have a driver for the PLB TEMAC (different than the GSRD LL > TEMAC) for Linux 2.4 (MontaVista Linux 2.4.20) that's shipped in EDK > 8.1.1, and MontaVista is on the verge of publishing a driver for PLB > TEMAC for Linux 2.6. (I believe it came across this mailing list a few > weeks ago) I have generated the BSP by EDK 8.1.1 for my project in ML403(hardcore Temac and PLB Temac included). I noticed that there is a directory called Xilinx_gige in the directory of /drivers/net. Is this the driver for MontaVista Linux2.4.20? I copied the BSP and overwrote the original one in the linux kernel directory (in the kernel directory, there is only a directory called Xilinx_enet, no Xilinx_gige. So I just copied Xilinx_gige.). However, my problem is in the menuconfig item of Network Device Support->1000Mbit ethernet, there is not any option to choose and enable the Xilinx on-chip ethernet. Is this a problem of MontaVista Linux 3.1 Preview Kit, or my problem? And What shall I do to enable the tri-mode Temac in my platform? Thanks for your answer. BR Ming _________________________________________________________________ Ãâ·ÑÏÂÔØ MSN Explorer: http://explorer.msn.com/lccn/