From mboxrd@z Thu Jan  1 00:00:00 1970
Return-Path: <eemingliu@hotmail.com>
Received: from bay0-omc2-s23.bay0.hotmail.com (bay0-omc2-s23.bay0.hotmail.com
	[65.54.246.159]) by ozlabs.org (Postfix) with ESMTP id E80FB67B55
	for <linuxppc-embedded@ozlabs.org>;
	Thu, 10 Aug 2006 18:57:48 +1000 (EST)
Message-ID: <BAY110-F31F8E978C237CACA6523FB24A0@phx.gbl>
From: "Ming Liu" <eemingliu@hotmail.com>
To: lombardo@mdivac.com
Subject: U-boot on ML403
Date: Thu, 10 Aug 2006 08:57:39 +0000
Mime-Version: 1.0
Content-Type: text/plain; charset=gb2312; format=flowed
Cc: linuxppc-embedded@ozlabs.org
List-Id: Linux on Embedded PowerPC Developers Mail List
	<linuxppc-embedded.ozlabs.org>
List-Unsubscribe: <https://ozlabs.org/mailman/listinfo/linuxppc-embedded>,
	<mailto:linuxppc-embedded-request@ozlabs.org?subject=unsubscribe>
List-Archive: <http://ozlabs.org/pipermail/linuxppc-embedded>
List-Post: <mailto:linuxppc-embedded@ozlabs.org>
List-Help: <mailto:linuxppc-embedded-request@ozlabs.org?subject=help>
List-Subscribe: <https://ozlabs.org/mailman/listinfo/linuxppc-embedded>,
	<mailto:linuxppc-embedded-request@ozlabs.org?subject=subscribe>

Dear Frank,
I know you are using U-boot on ML403 now. So can you say something about 
how to configure U-boot as ML403 board? I noticed that in U-boot 1.1.4, 
there is only ML300 supported. So if I want to configure the board as ML403 
and some other customed options(e.g. no EEPROM), what shall I do? Thanks 
for your help.

Regards
Ming

_________________________________________________________________
Ãâ·ÑÏÂÔØ MSN Explorer:   http://explorer.msn.com/lccn