From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Received: from hotmail.com (bay12-f14.bay12.hotmail.com [64.4.35.14]) by ozlabs.org (Postfix) with ESMTP id 28C2067A6C for ; Thu, 17 Mar 2005 08:39:34 +1100 (EST) Message-ID: From: "veikko romppainen" To: linuxppc-embedded@ozlabs.org Date: Wed, 16 Mar 2005 23:22:25 +0200 Mime-Version: 1.0 Content-Type: text/plain; charset=iso-8859-1; format=flowed Subject: porting linux & u-boot on Mdp Pro 8xx board List-Id: Linux on Embedded PowerPC Developers Mail List List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Hi I have currently running wxWorks on Mdp Pro 823 board. Now i'm trying port Linux on it. Firstable i have to get u-boot working on it. I hope someone has done this. Is there working configuration from u-boot to this board? I have modified QS823 conf, because it looks quite similar. Can I use VisionIce 2 and SingleStep to flash u-boot? We dont't have BDI in our school, shame. I flashed u-boot by using Ice starting at 0xfff00000. It seemed that it went correct place but nothing happened when i started my board. I suppose that I can't debug it with Ice and SingleStep. Do i have to flash more than just u-boot.bin in right address? (Environment?) Do i need some reg files or prj files? I would appreciate if someone could help me with these addresses and configs. Board specs: MPC 823 66 Mhz 4Mb flash 128 Mb RAM 512 K SRAM 8 K eeprom Mika Nieminen _________________________________________________________________ Nopeampi kuin sähköposti. Henkilökohtaisempi kuin chat. Lataa ilmainen MSN Messenger. http://messenger.msn.fi Lataa nyt koneellesi ilmainen MSN Messenger.