From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Received: from bay0-omc4-s9.bay0.hotmail.com (bay0-omc4-s9.bay0.hotmail.com [65.54.190.211]) by ozlabs.org (Postfix) with ESMTP id D7E2BB7D92 for ; Fri, 11 Jun 2010 09:12:36 +1000 (EST) Message-ID: Content-Type: multipart/alternative; boundary="_6919af1d-ae8b-44ea-ada9-3c88bd9999b6_" From: kostas padarnitsas To: Subject: RE: Port Linux to ML510 Date: Fri, 11 Jun 2010 02:12:33 +0300 In-Reply-To: References: , MIME-Version: 1.0 Cc: linuxppc-dev@lists.ozlabs.org List-Id: Linux on PowerPC Developers Mail List List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , --_6919af1d-ae8b-44ea-ada9-3c88bd9999b6_ Content-Type: text/plain; charset="iso-8859-7" Content-Transfer-Encoding: quoted-printable Hi Srikant=2C Thanks for your help. I checked the driver versions and they seem ok. The p= roblem is that when I download the linux image the program counter is not s= et to the address of boot sector of linux kernel=2C so linux doesn't boot. = On the other hand with the ML507 everything works perfectly. Any idea?? Thanks in advance=2CKostas Date: Thu=2C 10 Jun 2010 12:34:56 +0530 Subject: Re: Port Linux to ML510 From: skrishnakar@gmail.com To: kpada84@hotmail.com CC: linuxppc-dev@lists.ozlabs.org Hi kostas=2C You need to verify that the driver version of serial and Ethernet (probably= X-LLTEMAC) provided in the virtex440.dts matches version used in kernel. L= ook for "compatible =3D " in the drivers. You can probably use EDK= 11.2 as it is the latest from Xilinx.=20 Have you generated your own DTS and Bitstream (download.bit) files ? If not then you should look for suitable download.bit for you kernel. -Srikant 2010/6/10 kostas padarnitsas Hello=2C I am trying to port Linux to PowerPC on the ML510 Xilinx board. I am using = EDK 10.1.3 to build the hardware and also device tree generator and the lin= ux kernel from xilinx git. I followed the tutorial from http://xilinx.wikid= ot.com/powerpc-linux but I have no output. I have attached my .mhs file and= the .dts. Any ideas what may cause this problem because I did the same th= ing with ML507 and it was working perfectly? Thanks in advance=2CKostas =20 Your E-mail and More On-the-Go. Get Windows Live Hotmail Free. Sign up now. _______________________________________________ Linuxppc-dev mailing list Linuxppc-dev@lists.ozlabs.org https://lists.ozlabs.org/listinfo/linuxppc-dev --=20 "The Good You Do=2C The Best You GET" Regards Srikanth Krishnakar ********************** =20 _________________________________________________________________ Hotmail: Free=2C trusted and rich email service. https://signup.live.com/signup.aspx?id=3D60969= --_6919af1d-ae8b-44ea-ada9-3c88bd9999b6_ Content-Type: text/html; charset="iso-8859-7" Content-Transfer-Encoding: quoted-printable Hi Srikant=2C

Thanks for your help. I checked the driver= versions and they seem ok. The problem is that when I download the linux i= mage the program counter is not set to the address of boot sector of linux = kernel=2C so linux doesn't boot. On the other hand with the ML507 everythin= g works perfectly. Any idea??

Thanks in advance=2C=
Kostas

Date: Thu=2C 10 Jun 2010 1= 2:34:56 +0530
Subject: Re: Port Linux to ML510
From: skrishnakar@gmai= l.com
To: kpada84@hotmail.com
CC: linuxppc-dev@lists.ozlabs.org
Hi kostas=2C

You need to verify that the driver version of serial = and Ethernet (probably X-LLTEMAC) provided in the virtex440.dts matches ver= sion used in kernel. Look for "compatible =3D <=3Bversion>=3B" in the d= rivers. You can probably use EDK 11.2 as it is the latest from Xilinx.

Have you generated your own DTS and Bitstream (download.bit) files ?
If not then you should look for suitable download.bit for you kernel.<= br>
-Srikant

2010/6/10 kostas padar= nitsas <=3Bkpada= 84@hotmail.com>=3B
Hello=2C

I am trying to port Linux to PowerPC on the ML5= 10 Xilinx board. I am using EDK 10.1.3 to build the hardware and also devic= e tree generator and the linux kernel from xilinx git. I followed the tutor= ial from =3Bhttp://= xilinx.wikidot.com/powerpc-linux =3Bbut I have no output. I have at= tached my .mhs file and the .dts.  =3BAny ideas what may cause this pro= blem because I did the same thing with ML507 and it was working perfectly?<= /div>

Thanks in advance=2C
Kostas

Your E-mail an= d More On-the-Go. Get Windows Live Hotmail Free. Sign up now.

_______________________________________________
Linuxppc-dev mailing list
Linuxppc-dev@lists.ozlabs.= org
https://lists.oz= labs.org/listinfo/linuxppc-dev



--
"The Good You Do=2C The Best You GET"

Regards
Srikanth Krishnakar
**********************
=
Hotmail: Free=2C trusted and rich email service. Get it = now. = --_6919af1d-ae8b-44ea-ada9-3c88bd9999b6_--