From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Received: from hotmail.com (bay24-f13.bay24.hotmail.com [64.4.18.63]) by ozlabs.org (Postfix) with ESMTP id D784F679FF for ; Mon, 30 May 2005 23:53:48 +1000 (EST) Message-ID: In-Reply-To: <20050530110550.44528.qmail@web15810.mail.cnb.yahoo.com> From: "tuotuo wang" To: samlinuxppc@yahoo.com.cn Date: Mon, 30 May 2005 13:53:46 +0000 Mime-Version: 1.0 Content-Type: text/plain; charset=gb2312; format=flowed Cc: linuxppc-embedded@ozlabs.org Subject: Re: FW: Re: load u-boot.bin failure with BDI2000 List-Id: Linux on Embedded PowerPC Developers Mail List List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , hello,sam song: I have try my best to do this.I haven't another equipment,even the additional memory bank. Mr.denk: I konw i must change the DIP switch,the actual problem to me is i don't konw how to deal with the config file.Could you give me some clear help. >From: Sam Song >To: tuotuo wang >CC: linuxppc-embedded@ozlabs.org >Subject: Re: FW: Re: load u-boot.bin failure with BDI2000 >Date: Mon, 30 May 2005 19:05:49 +0800 (CST) > >---"tuotuo wang" wrote: > > > You know,my config file of BDI2000 is download > > > from www.denx.de,because > > > there have the sbc8260's.My board run the ppcboot > > > at first,and i can use my > > > BDI2000 properly with this config file. > >I perfer u to try again before taking a more >complicated action. Just leave target itself and >BDI2000, remove any other peripheral equipment. >Perhaps it could recover from such a failure. > >I had the similar experience on 8xx board. Don't >know whether it works for 82xx. > >Best regards, > >Sam > _________________________________________________________________ 与联机的朋友进行交流，请使用 MSN Messenger: http://messenger.msn.com/cn