From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Received: from hotmail.com (bay24-f40.bay24.hotmail.com [64.4.18.90]) by ozlabs.org (Postfix) with ESMTP id B86E2679F0 for ; Mon, 30 May 2005 11:07:06 +1000 (EST) Message-ID: From: "tuotuo wang" To: linuxppc-embedded@ozlabs.org Date: Mon, 30 May 2005 01:07:05 +0000 Mime-Version: 1.0 Content-Type: text/plain; charset=gb2312; format=flowed Subject: FW: Re: load u-boot.bin failure with BDI2000 List-Id: Linux on Embedded PowerPC Developers Mail List List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , >From: Shawn Jin >Reply-To: Shawn Jin >To: tuotuo wang >CC: linuxppc-embedded@ozlabs.org >Subject: Re: load u-boot.bin failure with BDI2000 >Date: Sun, 29 May 2005 11:28:28 -0700 > > > My target board is SBC8260,my debugger BDI2000,i have complied my u-boot > > file .But here is a mistake when i load it.Now i cann't enter the command > > line of u-boot.here is the display of BDI2000: > > - TARGET: processing user reset request > > - TARGET: Target PVR is 0x00810101 > > - TARGET: reseting target passed > > - TARGET: processing target init list .... > > *** TARGET: processing target init list failed > > # PPC: Writing to workspace failed > >There is somehting wrong with BDI2000 configuration file. Double check >what [INIT] section does for your target board. > >-Shawn. You know,my config file of BDI2000 is download from www.denx.de,because there have the sbc8260's.My board run the ppcboot at first,and i can use my BDI2000 properly with this config file. _________________________________________________________________ 享用世界上最大的电子邮件系统— MSN Hotmail。 http://www.hotmail.com