linuxppc-dev.lists.ozlabs.org archive mirror
 help / color / mirror / Atom feed
From: Kumar Gala <galak@kernel.crashing.org>
To: Andy Fleming <afleming@freescale.com>
Cc: linuxppc-dev@ozlabs.org, Jeff Garzik <jgarzik@pobox.com>
Subject: Re: [PATCH] Slight refactor of interrupt mapping for FSL parts
Date: Mon, 16 Oct 2006 16:37:09 -0500	[thread overview]
Message-ID: <C6870308-059D-40F8-8567-7A11AFAD2AE2@kernel.crashing.org> (raw)
In-Reply-To: <Pine.LNX.4.61.0610161554580.6266@ld0175-tx32.am.freescale.net>


On Oct 16, 2006, at 3:57 PM, Andy Fleming wrote:

>
> * Cleaned up interrupt mapping a little by adding a helper
>   function which parses the irq out of the device-tree, and puts
>   it into a resource.
> * Changed the PHY Layer to use NO_IRQ instead of -1 for PHY_POLL.
>   This means that polling will always be used if mapping the
>   interrupt fails for any reason.

You forgot to fixup the arch/ppc users of this.


> ---
>  arch/powerpc/sysdev/fsl_soc.c |   33 +++++++++++++++ 
> +-----------------
>  include/linux/phy.h           |    2 +-
>  2 files changed, 17 insertions(+), 18 deletions(-)
>
> diff --git a/arch/powerpc/sysdev/fsl_soc.c b/arch/powerpc/sysdev/ 
> fsl_soc.c
> index dbe92ae..aa24b51 100644
> --- a/arch/powerpc/sysdev/fsl_soc.c
> +++ b/arch/powerpc/sysdev/fsl_soc.c
> @@ -146,7 +146,7 @@ static int __init gfar_mdio_of_init(void
>  		}
>
>  		for (k = 0; k < 32; k++)
> -			mdio_data.irq[k] = -1;
> +			mdio_data.irq[k] = NO_IRQ;
>
>  		while ((child = of_get_next_child(np, child)) != NULL) {
>  			int irq = irq_of_parse_and_map(child, 0);
> @@ -177,6 +177,13 @@ static const char *gfar_tx_intr = "tx";
>  static const char *gfar_rx_intr = "rx";
>  static const char *gfar_err_intr = "error";
>
> +
> +void of_irq_to_resource(struct device_node *dev, int index, struct  
> resource *r)
> +{
> +	r->start = r->end = irq_of_parse_and_map(dev, index);
> +	r->flags = IORESOURCE_IRQ;
> +}

Why don't you stick this in prom_parse.c (and add a prototype to prom.h)

> +
>  static int __init gfar_of_init(void)
>  {
>  	struct device_node *np;
> @@ -204,8 +211,7 @@ static int __init gfar_of_init(void)
>  		if (ret)
>  			goto err;
>
> -		r[1].start = r[1].end = irq_of_parse_and_map(np, 0);
> -		r[1].flags = IORESOURCE_IRQ;
> +		of_irq_to_resource(np, 0, &r[1]);
>
>  		model = get_property(np, "model", NULL);
>
> @@ -214,12 +220,10 @@ static int __init gfar_of_init(void)
>  			r[1].name = gfar_tx_intr;
>
>  			r[2].name = gfar_rx_intr;
> -			r[2].start = r[2].end = irq_of_parse_and_map(np, 1);
> -			r[2].flags = IORESOURCE_IRQ;
> +			of_irq_to_resource(np, 1, &r[2]);
>
>  			r[3].name = gfar_err_intr;
> -			r[3].start = r[3].end = irq_of_parse_and_map(np, 2);
> -			r[3].flags = IORESOURCE_IRQ;
> +			of_irq_to_resource(np, 2, &r[3]);
>
>  			n_res += 2;
>  		}
> @@ -323,8 +327,7 @@ static int __init fsl_i2c_of_init(void)
>  		if (ret)
>  			goto err;
>
> -		r[1].start = r[1].end = irq_of_parse_and_map(np, 0);
> -		r[1].flags = IORESOURCE_IRQ;
> +		of_irq_to_resource(np, 0, &r[1]);
>
>  		i2c_dev = platform_device_register_simple("fsl-i2c", i, r, 2);
>  		if (IS_ERR(i2c_dev)) {
> @@ -459,8 +462,7 @@ static int __init fsl_usb_of_init(void)
>  		if (ret)
>  			goto err;
>
> -		r[1].start = r[1].end = irq_of_parse_and_map(np, 0);
> -		r[1].flags = IORESOURCE_IRQ;
> +		of_irq_to_resource(np, 0, &r[1]);
>
>  		usb_dev_mph =
>  		    platform_device_register_simple("fsl-ehci", i, r, 2);
> @@ -507,8 +509,7 @@ static int __init fsl_usb_of_init(void)
>  		if (ret)
>  			goto unreg_mph;
>
> -		r[1].start = r[1].end = irq_of_parse_and_map(np, 0);
> -		r[1].flags = IORESOURCE_IRQ;
> +		of_irq_to_resource(np, 0, &r[1]);
>
>  		usb_dev_dr =
>  		    platform_device_register_simple("fsl-ehci", i, r, 2);
> @@ -591,8 +592,7 @@ static int __init fs_enet_of_init(void)
>  		r[2].name = fcc_regs_c;
>  		fs_enet_data.fcc_regs_c = r[2].start;
>
> -		r[3].start = r[3].end = irq_of_parse_and_map(np, 0);
> -		r[3].flags = IORESOURCE_IRQ;
> +		of_irq_to_resource(np, 0, &r[3]);
>
>  		fs_enet_dev =
>  		    platform_device_register_simple("fsl-cpm-fcc", i, &r[0], 4);
> @@ -754,8 +754,7 @@ static int __init cpm_uart_of_init(void)
>  			goto err;
>  		r[1].name = scc_pram;
>
> -		r[2].start = r[2].end = irq_of_parse_and_map(np, 0);
> -		r[2].flags = IORESOURCE_IRQ;
> +		of_irq_to_resource(np, 0, &r[2]);
>
>  		cpm_uart_dev =
>  		    platform_device_register_simple("fsl-cpm-scc:uart", i, &r 
> [0], 3);
> diff --git a/include/linux/phy.h b/include/linux/phy.h
> index 9447a57..d7b3751 100644
> --- a/include/linux/phy.h
> +++ b/include/linux/phy.h
> @@ -37,7 +37,7 @@ #define PHY_GBIT_FEATURES	(PHY_BASIC_FEA
>   * or not desired for this PHY.  Set to PHY_IGNORE_INTERRUPT if
>   * the attached driver handles the interrupt
>   */
> -#define PHY_POLL		-1
> +#define PHY_POLL		NO_IRQ
>  #define PHY_IGNORE_INTERRUPT	-2
>
>  #define PHY_HAS_INTERRUPT	0x00000001
> -- 
> 1.4.2.3

  reply	other threads:[~2006-10-16 21:37 UTC|newest]

Thread overview: 11+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2006-10-16 20:57 [PATCH] Slight refactor of interrupt mapping for FSL parts Andy Fleming
2006-10-16 21:37 ` Kumar Gala [this message]
2006-10-16 21:51   ` Joakim Tjernlund
2006-10-18 13:50     ` Vitaly Bordug
2006-10-19 19:14     ` Andy Fleming
2006-10-19 22:40       ` Joakim Tjernlund
2006-10-20  0:54         ` Andy Fleming
2006-10-16 21:54   ` Kumar Gala
2006-10-16 22:58 ` Benjamin Herrenschmidt
  -- strict thread matches above, loose matches on Subject: below --
2006-10-17  6:27 Andy Fleming
2006-10-17 15:50 ` Kumar Gala

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=C6870308-059D-40F8-8567-7A11AFAD2AE2@kernel.crashing.org \
    --to=galak@kernel.crashing.org \
    --cc=afleming@freescale.com \
    --cc=jgarzik@pobox.com \
    --cc=linuxppc-dev@ozlabs.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).