linuxppc-dev.lists.ozlabs.org archive mirror
 help / color / mirror / Atom feed
From: Shengjiu Wang <shengjiu.wang@gmail.com>
To: Nicolin Chen <nicoleotsuka@gmail.com>
Cc: Linux-ALSA <alsa-devel@alsa-project.org>,
	Timur Tabi <timur@kernel.org>, Xiubo Li <Xiubo.Lee@gmail.com>,
	Fabio Estevam <festevam@gmail.com>,
	Shengjiu Wang <shengjiu.wang@nxp.com>,
	Takashi Iwai <tiwai@suse.com>,
	Liam Girdwood <lgirdwood@gmail.com>,
	Mark Brown <broonie@kernel.org>,
	linuxppc-dev@lists.ozlabs.org,
	linux-kernel <linux-kernel@vger.kernel.org>
Subject: Re: [PATCH] ASoC: fsl_asrc: Merge suspend/resume function to runtime_suspend/resume
Date: Mon, 25 May 2020 14:11:18 +0800	[thread overview]
Message-ID: <CAA+D8AML7P3j+14w5PywPy4QEcxw09z1izZSZbrOB_nte+XDmA@mail.gmail.com> (raw)
In-Reply-To: <20200525050950.GA1244@Asurada>

On Mon, May 25, 2020 at 1:12 PM Nicolin Chen <nicoleotsuka@gmail.com> wrote:
>
> On Fri, May 22, 2020 at 05:57:24PM +0800, Shengjiu Wang wrote:
> > With dedicated power domain for asrc, power can be disabled after
> > probe and pm runtime suspend, then the value of all registers need to
> > be restored in pm runtime resume. So we can merge suspend/resume function
> > to runtime_suspend/resume function and enable regcache only in end of
> > probe.
> >
> > Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com>
> > ---
> >  sound/soc/fsl/fsl_asrc.c | 70 ++++++++++++++++------------------------
> >  1 file changed, 27 insertions(+), 43 deletions(-)
> >
> > diff --git a/sound/soc/fsl/fsl_asrc.c b/sound/soc/fsl/fsl_asrc.c
> > index 432936039de4..3ebbe15ac378 100644
> > --- a/sound/soc/fsl/fsl_asrc.c
> > +++ b/sound/soc/fsl/fsl_asrc.c
> > @@ -1100,6 +1100,7 @@ static int fsl_asrc_probe(struct platform_device *pdev)
> >       platform_set_drvdata(pdev, asrc);
> >       pm_runtime_enable(&pdev->dev);
> >       spin_lock_init(&asrc->lock);
> > +     regcache_cache_only(asrc->regmap, true);
> >
> >       ret = devm_snd_soc_register_component(&pdev->dev, &fsl_asrc_component,
> >                                             &fsl_asrc_dai, 1);
> > @@ -1117,6 +1118,7 @@ static int fsl_asrc_runtime_resume(struct device *dev)
> >       struct fsl_asrc *asrc = dev_get_drvdata(dev);
> >       struct fsl_asrc_priv *asrc_priv = asrc->private;
> >       int i, ret;
> > +     u32 asrctr;
> >
> >       ret = clk_prepare_enable(asrc->mem_clk);
> >       if (ret)
> > @@ -1135,6 +1137,24 @@ static int fsl_asrc_runtime_resume(struct device *dev)
> >                       goto disable_asrck_clk;
> >       }
> >
> > +     /* Stop all pairs provisionally */
> > +     regmap_read(asrc->regmap, REG_ASRCTR, &asrctr);
> > +     regmap_update_bits(asrc->regmap, REG_ASRCTR,
> > +                        ASRCTR_ASRCEi_ALL_MASK, 0);
> > +
> > +     /* Restore all registers */
> > +     regcache_cache_only(asrc->regmap, false);
> > +     regcache_mark_dirty(asrc->regmap);
>
>
> I see you doing regcache_mark_dirty() in the resume() now,
> being different from previously doing in suspend()?
>
> Thanks
> Nic

Which is for probe -> runtime_resume case.
After probe, the power may be disabled, so move mark_dirtry
to runtime_resume, then regcache can re-write all the registers.

best regards
wang shengjiu

>
>
> > +     regcache_sync(asrc->regmap);
> > +
> > +     regmap_update_bits(asrc->regmap, REG_ASRCFG,
> > +                        ASRCFG_NDPRi_ALL_MASK | ASRCFG_POSTMODi_ALL_MASK |
> > +                        ASRCFG_PREMODi_ALL_MASK, asrc_priv->regcache_cfg);
> > +
> > +     /* Restart enabled pairs */
> > +     regmap_update_bits(asrc->regmap, REG_ASRCTR,
> > +                        ASRCTR_ASRCEi_ALL_MASK, asrctr);
> > +
> >       return 0;
> >
> >  disable_asrck_clk:
> > @@ -1155,6 +1175,11 @@ static int fsl_asrc_runtime_suspend(struct device *dev)
> >       struct fsl_asrc_priv *asrc_priv = asrc->private;
> >       int i;
> >
> > +     regmap_read(asrc->regmap, REG_ASRCFG,
> > +                 &asrc_priv->regcache_cfg);
> > +
> > +     regcache_cache_only(asrc->regmap, true);
> > +
> >       for (i = 0; i < ASRC_CLK_MAX_NUM; i++)
> >               clk_disable_unprepare(asrc_priv->asrck_clk[i]);
> >       if (!IS_ERR(asrc->spba_clk))
> > @@ -1166,51 +1191,10 @@ static int fsl_asrc_runtime_suspend(struct device *dev)
> >  }
> >  #endif /* CONFIG_PM */
> >
> > -#ifdef CONFIG_PM_SLEEP
> > -static int fsl_asrc_suspend(struct device *dev)
> > -{
> > -     struct fsl_asrc *asrc = dev_get_drvdata(dev);
> > -     struct fsl_asrc_priv *asrc_priv = asrc->private;
> > -
> > -     regmap_read(asrc->regmap, REG_ASRCFG,
> > -                 &asrc_priv->regcache_cfg);
> > -
> > -     regcache_cache_only(asrc->regmap, true);
> > -     regcache_mark_dirty(asrc->regmap);
> > -
> > -     return 0;
> > -}
> > -
> > -static int fsl_asrc_resume(struct device *dev)
> > -{
> > -     struct fsl_asrc *asrc = dev_get_drvdata(dev);
> > -     struct fsl_asrc_priv *asrc_priv = asrc->private;
> > -     u32 asrctr;
> > -
> > -     /* Stop all pairs provisionally */
> > -     regmap_read(asrc->regmap, REG_ASRCTR, &asrctr);
> > -     regmap_update_bits(asrc->regmap, REG_ASRCTR,
> > -                        ASRCTR_ASRCEi_ALL_MASK, 0);
> > -
> > -     /* Restore all registers */
> > -     regcache_cache_only(asrc->regmap, false);
> > -     regcache_sync(asrc->regmap);
> > -
> > -     regmap_update_bits(asrc->regmap, REG_ASRCFG,
> > -                        ASRCFG_NDPRi_ALL_MASK | ASRCFG_POSTMODi_ALL_MASK |
> > -                        ASRCFG_PREMODi_ALL_MASK, asrc_priv->regcache_cfg);
> > -
> > -     /* Restart enabled pairs */
> > -     regmap_update_bits(asrc->regmap, REG_ASRCTR,
> > -                        ASRCTR_ASRCEi_ALL_MASK, asrctr);
> > -
> > -     return 0;
> > -}
> > -#endif /* CONFIG_PM_SLEEP */
> > -
> >  static const struct dev_pm_ops fsl_asrc_pm = {
> >       SET_RUNTIME_PM_OPS(fsl_asrc_runtime_suspend, fsl_asrc_runtime_resume, NULL)
> > -     SET_SYSTEM_SLEEP_PM_OPS(fsl_asrc_suspend, fsl_asrc_resume)
> > +     SET_SYSTEM_SLEEP_PM_OPS(pm_runtime_force_suspend,
> > +                             pm_runtime_force_resume)
> >  };
> >
> >  static const struct fsl_asrc_soc_data fsl_asrc_imx35_data = {
> > --
> > 2.21.0
> >

  reply	other threads:[~2020-05-25  6:13 UTC|newest]

Thread overview: 6+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-05-22  9:57 [PATCH] ASoC: fsl_asrc: Merge suspend/resume function to runtime_suspend/resume Shengjiu Wang
2020-05-25  5:09 ` Nicolin Chen
2020-05-25  6:11   ` Shengjiu Wang [this message]
2020-05-25  6:18     ` Nicolin Chen
2020-05-25  6:16 ` Nicolin Chen
2020-05-25 14:57 ` Mark Brown

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=CAA+D8AML7P3j+14w5PywPy4QEcxw09z1izZSZbrOB_nte+XDmA@mail.gmail.com \
    --to=shengjiu.wang@gmail.com \
    --cc=Xiubo.Lee@gmail.com \
    --cc=alsa-devel@alsa-project.org \
    --cc=broonie@kernel.org \
    --cc=festevam@gmail.com \
    --cc=lgirdwood@gmail.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linuxppc-dev@lists.ozlabs.org \
    --cc=nicoleotsuka@gmail.com \
    --cc=shengjiu.wang@nxp.com \
    --cc=timur@kernel.org \
    --cc=tiwai@suse.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).