* Re: [PATCH 16/20] kbuild: powerpc: use common install script
2021-04-07 5:34 ` [PATCH 16/20] kbuild: powerpc: use common install script Greg Kroah-Hartman
@ 2021-04-07 11:32 ` Masahiro Yamada
0 siblings, 0 replies; 2+ messages in thread
From: Masahiro Yamada @ 2021-04-07 11:32 UTC (permalink / raw)
To: Greg Kroah-Hartman, Michael Ellerman
Cc: linux-arch, Michal Marek, linuxppc-dev, Linux Kernel Mailing List,
Linux Kbuild mailing list
On Wed, Apr 7, 2021 at 2:34 PM Greg Kroah-Hartman
<gregkh@linuxfoundation.org> wrote:
>
> The common scripts/install.sh script will now work for powerpc, all that
> is needed is to add it to the list of arches that do not put the version
> number in the installed file name.
>
> After the kernel is installed, powerpc also likes to install a few
> random files, so provide the ability to do that as well.
>
> With that we can remove the powerpc-only version of the install script.
>
> Cc: Michael Ellerman <mpe@ellerman.id.au>
> Cc: linuxppc-dev@lists.ozlabs.org
> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
> ---
> arch/powerpc/boot/Makefile | 4 +--
> arch/powerpc/boot/install.sh | 55 ------------------------------------
> scripts/install.sh | 14 ++++++++-
> 3 files changed, 15 insertions(+), 58 deletions(-)
> delete mode 100644 arch/powerpc/boot/install.sh
>
> diff --git a/arch/powerpc/boot/Makefile b/arch/powerpc/boot/Makefile
> index 2b8da923ceca..bbfcbd33e0b7 100644
> --- a/arch/powerpc/boot/Makefile
> +++ b/arch/powerpc/boot/Makefile
> @@ -442,11 +442,11 @@ $(obj)/zImage.initrd: $(addprefix $(obj)/, $(initrd-y))
>
> # Only install the vmlinux
> install: $(CONFIGURE) $(addprefix $(obj)/, $(image-y))
> - sh -x $(srctree)/$(src)/install.sh "$(KERNELRELEASE)" vmlinux System.map "$(INSTALL_PATH)"
> + sh -x $(srctree)/scripts/install.sh "$(KERNELRELEASE)" vmlinux System.map "$(INSTALL_PATH)"
>
> # Install the vmlinux and other built boot targets.
> zInstall: $(CONFIGURE) $(addprefix $(obj)/, $(image-y))
> - sh -x $(srctree)/$(src)/install.sh "$(KERNELRELEASE)" vmlinux System.map "$(INSTALL_PATH)" $^
> + sh -x $(srctree)/scripts/install.sh "$(KERNELRELEASE)" vmlinux System.map "$(INSTALL_PATH)" $^
I want comments from the ppc maintainers
because this code is already broken.
This 'zInstall' target is unreachable.
See commit c913e5f95e546d8d3a9f99ba9908f7e095cbc1fb
It added the new target 'zInstall', but it is not hooked anywhere.
It is completely useless for 6 years, and nobody has pointed it out.
So, I think nobody is caring about this broken code.
One more thing, Kbuild does not recognize it as an installation target
because the 'I' in 'zInstall' is a capital letter.
The name of the installation target must be '*install',
all letters in lower cases.
> PHONY += install zInstall
>
> diff --git a/arch/powerpc/boot/install.sh b/arch/powerpc/boot/install.sh
> deleted file mode 100644
> index b6a256bc96ee..000000000000
> --- a/arch/powerpc/boot/install.sh
> +++ /dev/null
> @@ -1,55 +0,0 @@
> -#!/bin/sh
> -#
> -# This file is subject to the terms and conditions of the GNU General Public
> -# License. See the file "COPYING" in the main directory of this archive
> -# for more details.
> -#
> -# Copyright (C) 1995 by Linus Torvalds
> -#
> -# Blatantly stolen from in arch/i386/boot/install.sh by Dave Hansen
> -#
> -# "make install" script for ppc64 architecture
> -#
> -# Arguments:
> -# $1 - kernel version
> -# $2 - kernel image file
> -# $3 - kernel map file
> -# $4 - default install path (blank if root directory)
> -# $5 and more - kernel boot files; zImage*, uImage, cuImage.*, etc.
> -#
> -
> -# Bail with error code if anything goes wrong
> -set -e
> -
> -# User may have a custom install script
> -
> -if [ -x ~/bin/${INSTALLKERNEL} ]; then exec ~/bin/${INSTALLKERNEL} "$@"; fi
> -if [ -x /sbin/${INSTALLKERNEL} ]; then exec /sbin/${INSTALLKERNEL} "$@"; fi
> -
> -# Default install
> -
> -# this should work for both the pSeries zImage and the iSeries vmlinux.sm
> -image_name=`basename $2`
> -
> -if [ -f $4/$image_name ]; then
> - mv $4/$image_name $4/$image_name.old
> -fi
> -
> -if [ -f $4/System.map ]; then
> - mv $4/System.map $4/System.old
> -fi
> -
> -cat $2 > $4/$image_name
> -cp $3 $4/System.map
> -
> -# Copy all the bootable image files
> -path=$4
> -shift 4
> -while [ $# -ne 0 ]; do
> - image_name=`basename $1`
> - if [ -f $path/$image_name ]; then
> - mv $path/$image_name $path/$image_name.old
> - fi
> - cat $1 > $path/$image_name
> - shift
> -done;
> diff --git a/scripts/install.sh b/scripts/install.sh
> index e0ffb95737d4..67c0a5f74af2 100644
> --- a/scripts/install.sh
> +++ b/scripts/install.sh
> @@ -67,7 +67,7 @@ fi
> # Some architectures name their files based on version number, and
> # others do not. Call out the ones that do not to make it obvious.
> case "${ARCH}" in
> - ia64 | m68k | nios2 | x86)
> + ia64 | m68k | nios2 | powerpc | x86)
> version=""
> ;;
> *)
> @@ -93,6 +93,18 @@ case "${ARCH}" in
> /usr/sbin/elilo
> fi
> ;;
> + powerpc)
> + # powerpc installation can list other boot targets after the
> + # install path that should be copied to the correct location
Perhaps, we can remove this if the ppc maintainers approve it ?
> + path=$4
> + shift 4
> + while [ $# -ne 0 ]; do
> + image_name=$(basename "$1")
> + install "$1" "$path"/"$image_name"
> + shift
> + done;
> + sync
> + ;;
> x86)
> if [ -x /sbin/lilo ]; then
> /sbin/lilo
> --
> 2.31.1
>
--
Best Regards
Masahiro Yamada
^ permalink raw reply [flat|nested] 2+ messages in thread