* Re: [PATCH 10/10] dt-bindings: serial: Convert 8250 to json-schema
[not found] ` <20200320174107.29406-11-lkundrak@v3.sk>
@ 2020-03-23 19:00 ` Rob Herring
0 siblings, 0 replies; 4+ messages in thread
From: Rob Herring @ 2020-03-23 19:00 UTC (permalink / raw)
To: Lubomir Rintel
Cc: Mark Rutland, devicetree, Mans Rullgard, Marc Gonzalez,
Greg Kroah-Hartman, linuxppc-dev, Haojian Zhuang,
linux-kernel@vger.kernel.org, Paul Mackerras,
open list:SERIAL DRIVERS, Robert Jarzmik, Daniel Mack
On Fri, Mar 20, 2020 at 11:41 AM Lubomir Rintel <lkundrak@v3.sk> wrote:
>
> Some fixes were done during the conversion:
Thanks for doing this!
>
> Slightly better examples. The original example was for an OMAP serial
> port, which is not even described by this binding, but by
> omap_serial.txt instead.
>
> Added compatible strings, that were used, byt not documented:
> andestech,uart16550, cavium,octeon-3860-uart, fsl,16550-FIFO64,
> nvidia,tegra186-uart, nvidia,tegra194-uart, nxp,lpc1850-uart,
> opencores,uart16550-rtlsvn105, ralink,mt7620a-uart, ralink,rt3052-uart,
> ralink,rt3883-uart and xlnx,xps-uart16550-2.00.b.
>
> Removed "serial" compatible string. It's redundant with the node name
> (which, in OFW, serves the same purpose as the compatible string).
Yeah, that seems fairly useless to me.
> Signed-off-by: Lubomir Rintel <lkundrak@v3.sk>
> ---
> .../devicetree/bindings/serial/8250.txt | 102 --------
> .../devicetree/bindings/serial/8250.yaml | 246 ++++++++++++++++++
> 2 files changed, 246 insertions(+), 102 deletions(-)
> delete mode 100644 Documentation/devicetree/bindings/serial/8250.txt
> create mode 100644 Documentation/devicetree/bindings/serial/8250.yaml
[...]
> diff --git a/Documentation/devicetree/bindings/serial/8250.yaml b/Documentation/devicetree/bindings/serial/8250.yaml
> new file mode 100644
> index 0000000000000..88192f94385b0
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/serial/8250.yaml
> @@ -0,0 +1,246 @@
> +# Copyright 2020 Lubomir Rintel <lkundrak@v3.sk>
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/serial/8250.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: UART (Universal Asynchronous Receiver/Transmitter) bindings
Perhaps: "8250 series UART..."
> +
> +maintainers:
> + - devicetree@vger.kernel.org
> +
> +allOf:
> + - $ref: /schemas/serial.yaml#
> + - if:
> + not:
> + required:
> + - clock-frequency
> + then:
> + required:
> + - clocks
> + - if:
> + not:
> + required:
> + - clocks
> + then:
> + required:
> + - clock-frequency
anyOf:
- required: [ clock-frequency ]
- required: [ clocks ]
> + - if:
> + required:
> + - aspeed,sirq-polarity-sense
> + then:
> + properties:
> + compatible:
> + const: aspeed,ast2500-vuart
> + - if:
> + properties:
> + compatible:
> + const: mrvl,mmp-uart
> + then:
> + properties:
> + reg-shift:
> + const: 2
> + required:
> + - reg-shift
> +
> +properties:
> + compatible:
> + oneOf:
> + - const: ns8250
> + - const: ns16450
> + - const: ns16550
> + - const: ns16550a
> + - const: ns16850
> + - const: aspeed,ast2400-vuart
> + - const: aspeed,ast2500-vuart
> + - const: intel,xscale-uart
> + - const: mrvl,pxa-uart
> + - const: nuvoton,npcm750-uart
> + - const: nvidia,tegra20-uart
> + - const: nxp,lpc3220-uart
> + - items:
> + - enum:
> + - altr,16550-FIFO32
> + - altr,16550-FIFO64
> + - altr,16550-FIFO128
> + - fsl,16550-FIFO64
> + - fsl,ns16550
> + - andestech,uart16550
> + - nxp,lpc1850-uart
> + - opencores,uart16550-rtlsvn105
> + - ti,da830-uart
> + - const: ns16550a
> + - items:
> + - enum:
> + - ns16750
> + - cavium,octeon-3860-uart
> + - xlnx,xps-uart16550-2.00.b
> + - ralink,rt2880-uart
> + - const: ns16550
Seems to me these are just as likely to be wrong as the fsl,ns16550 as
it's unlikely the FIFO is broken. Perhaps a note here to use
'ns16550a' instead unless you have a broken FIFO.
> + - items:
> + - enum:
> + - ralink,mt7620a-uart
> + - ralink,rt3052-uart
> + - ralink,rt3883-uart
> + - const: ralink,rt2880-uart
> + - const: ns16550
> + - items:
> + - enum:
> + - mediatek,mt7622-btif
> + - mediatek,mt7623-btif
> + - const: mediatek,mtk-btif
> + - items:
> + - enum:
> + - mediatek,mt7622-btif
> + - mediatek,mt7623-btif
> + - const: mediatek,mtk-btif
> + - items:
> + - const: mrvl,mmp-uart
> + - const: intel,xscale-uart
> + - items:
> + - enum:
> + - nvidia,tegra30-uart
> + - nvidia,tegra114-uart
> + - nvidia,tegra124-uart
> + - nvidia,tegra186-uart
> + - nvidia,tegra194-uart
> + - nvidia,tegra210-uart
> + - const: nvidia,tegra20-uart
> +
> + reg:
> + maxItems: 1
> +
> + interrupts:
> + maxItems: 1
> +
> + clock-frequency: true
> +
> + clocks:
> + maxItems: 1
> +
> + current-speed:
> + description: The current active speed of the UART.
Needs a type reference.
> + reg-offset:
> + description: |
> + Offset to apply to the mapbase from the start of the registers.
> +
> + reg-shift:
> + description: Quantity to shift the register offsets by.
> +
> + reg-io-width:
> + description: |
> + The size (in bytes) of the IO accesses that should be performed on the
> + device. There are some systems that require 32-bit accesses to the
> + UART (e.g. TI davinci).
We'll assume these have a type definition elsewhere.
> +
> + used-by-rtas:
> + description: |
> + Set to indicate that the port is in use by the OpenFirmware RTAS and
> + should not be registered.
Needs a type reference.
> +
> + no-loopback-test:
> + description: |
> + Set to indicate that the port does not implements loopback test mode.
s/implements/implement/
Needs a type reference (or 'type: boolean').
> +
> + fifo-size:
> + description: The fifo size of the UART.
> +
> + auto-flow-control:
> + description: |
> + One way to enable automatic flow control support. The driver is
> + allowed to detect support for the capability even without this
> + property.
> +
> + tx-threshold:
> + description: |
> + Specify the TX FIFO low water indication for parts with programmable
> + TX FIFO thresholds.
Need a type reference for all these.
> +
> + resets:
> + description: Phandle + reset specifier pairs
Is there a range of number of resets? Use minItems/maxItems.
> +
> + overrun-throttle-ms:
> + description: |
> + How long to pause uart rx when input overrun is encountered.
> +
> + rts-gpios:
> + description: |
> + Specify a GPIO for RTS line to be used instead of the peripheral
> + function pin for the UART feature.
No need to define properties from serial.yaml again. Just 'rts-gpios: true'.
> +
> + cts-gpios:
> + description: |
> + Specify a GPIO for CTS line to be used instead of the peripheral
> + function pin for the UART feature.
> +
> + dtr-gpios:
> + description: |
> + Specify a GPIO for DTR line to be used instead of the peripheral
> + function pin for the UART feature.
> +
> + dsr-gpios:
> + description: |
> + Specify a GPIO for DSR line to be used instead of the peripheral
> + function pin for the UART feature.
> +
> + rng-gpios:
> + description: |
> + Specify a GPIO for RNG line to be used instead of the peripheral
> + function pin for the UART feature.
> +
> + dcd-gpios:
> + description: |
> + Specify a GPIO for DCD line to be used instead of the peripheral
> + function pin for the UART feature.
> +
> + aspeed,sirq-polarity-sense:
> + $ref: '/schemas/types.yaml#/definitions/phandle-array'
> + description: |
> + Phandle to aspeed,ast2500-scu compatible syscon alongside register
> + offset and bit number to identify how the SIRQ polarity should be
> + configured. One possible data source is the LPC/eSPI mode bit. Only
> + applicable to aspeed,ast2500-vuart.
> +
> +required:
> + - reg
> + - interrupts
> +
> +additionalProperties: false
> +
> +examples:
> + - |
> + serial@80230000 {
> + compatible = "ns8250";
> + reg = <0x80230000 0x100>;
> + interrupts = <10>;
> + reg-shift = <2>;
> + clock-frequency = <48000000>;
> + };
> + - |
> + #include <dt-bindings/gpio/gpio.h>
> + serial@49042000 {
> + compatible = "andestech,uart16550", "ns16550a";
> + reg = <0x49042000 0x400>;
> + interrupts = <80>;
> + clock-frequency = <48000000>;
> + cts-gpios = <&gpio3 5 GPIO_ACTIVE_LOW>;
> + rts-gpios = <&gpio3 6 GPIO_ACTIVE_LOW>;
> + dtr-gpios = <&gpio1 12 GPIO_ACTIVE_LOW>;
> + dsr-gpios = <&gpio1 13 GPIO_ACTIVE_LOW>;
> + dcd-gpios = <&gpio1 14 GPIO_ACTIVE_LOW>;
> + rng-gpios = <&gpio1 15 GPIO_ACTIVE_LOW>;
> + };
> + - |
> + #include <dt-bindings/clock/aspeed-clock.h>
> + serial@1e787000 {
> + compatible = "aspeed,ast2500-vuart";
> + reg = <0x1e787000 0x40>;
> + reg-shift = <2>;
> + interrupts = <8>;
> + clocks = <&syscon ASPEED_CLK_APB>;
> + no-loopback-test;
> + aspeed,sirq-polarity-sense = <&syscon 0x70 25>;
> + };
> +
> +...
> --
> 2.25.1
>
^ permalink raw reply [flat|nested] 4+ messages in thread