From: Suman Tripathi <stripathi@apm.com>
To: Chris Ball <chris@printf.net>, Anton Vorontsov <anton@enomsg.org>,
Arnd Bergmann <arnd@arndb.de>,
Michal Simek <michal.simek@xilinx.com>
Cc: "devicetree@vger.kernel.org" <devicetree@vger.kernel.org>,
Mark Langsdorf <mlangsdo@redhat.com>,
Suman Tripathi <stripathi@apm.com>, Jon Masters <jcm@redhat.com>,
linux-mmc <linux-mmc@vger.kernel.org>, patches <patches@apm.com>,
Don Dutile <ddutile@redhat.com>,
linuxppc-dev <linuxppc-dev@lists.ozlabs.org>,
linux-arm-kernel <linux-arm-kernel@lists.infradead.org>
Subject: Re: [PATCH v6 1/2] arm64: dts: Add the arasan sdhci nodes in apm-storm.dtsi.
Date: Fri, 8 May 2015 13:39:39 +0530 [thread overview]
Message-ID: <CAOHikRDMqKo+c8CSkxAGaP8jOqB0aw9yFXvqxz_j6Di_sLciLA@mail.gmail.com> (raw)
In-Reply-To: <1430919731-9016-2-git-send-email-stripathi@apm.com>
[-- Attachment #1: Type: text/plain, Size: 3883 bytes --]
On Wed, May 6, 2015 at 7:12 PM, Suman Tripathi <stripathi@apm.com> wrote:
> This patch adds the arasan sdhci nodes to reuse the of-arasan
> driver for APM X-Gene SoC.
>
> Signed-off-by: Suman Tripathi <stripathi@apm.com>
> ---
> arch/arm64/boot/dts/apm/apm-mustang.dts | 4 +++
> arch/arm64/boot/dts/apm/apm-storm.dtsi | 43
> +++++++++++++++++++++++++++++++++
> 2 files changed, 47 insertions(+)
>
> diff --git a/arch/arm64/boot/dts/apm/apm-mustang.dts
> b/arch/arm64/boot/dts/apm/apm-mustang.dts
> index 83578e7..7ccd517 100644
> --- a/arch/arm64/boot/dts/apm/apm-mustang.dts
> +++ b/arch/arm64/boot/dts/apm/apm-mustang.dts
> @@ -52,3 +52,7 @@
> &xgenet {
> status = "ok";
> };
> +
> +&sdhci0 {
> + status = "ok";
> +};
> diff --git a/arch/arm64/boot/dts/apm/apm-storm.dtsi
> b/arch/arm64/boot/dts/apm/apm-storm.dtsi
> index c8d3e0e..b5d2698 100644
> --- a/arch/arm64/boot/dts/apm/apm-storm.dtsi
> +++ b/arch/arm64/boot/dts/apm/apm-storm.dtsi
> @@ -145,6 +145,40 @@
> clock-output-names = "socplldiv2";
> };
>
> + ahbclk: ahbclk@1f2ac000 {
> + compatible = "apm,xgene-device-clock";
> + #clock-cells = <1>;
> + clocks = <&socplldiv2 0>;
> + reg = <0x0 0x1f2ac000 0x0 0x1000
> + 0x0 0x17000000 0x0 0x2000>;
> + reg-names = "csr-reg", "div-reg";
> + csr-offset = <0x0>;
> + csr-mask = <0x1>;
> + enable-offset = <0x8>;
> + enable-mask = <0x1>;
> + divider-offset = <0x164>;
> + divider-width = <0x5>;
> + divider-shift = <0x0>;
> + clock-output-names = "ahbclk";
> + };
> +
> + sdioclk: sdioclk@1f2ac000 {
> + compatible = "apm,xgene-device-clock";
> + #clock-cells = <1>;
> + clocks = <&socplldiv2 0>;
> + reg = <0x0 0x1f2ac000 0x0 0x1000
> + 0x0 0x17000000 0x0 0x2000>;
> + reg-names = "csr-reg", "div-reg";
> + csr-offset = <0x0>;
> + csr-mask = <0x2>;
> + enable-offset = <0x8>;
> + enable-mask = <0x2>;
> + divider-offset = <0x178>;
> + divider-width = <0x8>;
> + divider-shift = <0x0>;
> + clock-output-names = "sdioclk";
> + };
> +
> qmlclk: qmlclk {
> compatible = "apm,xgene-device-clock";
> #clock-cells = <1>;
> @@ -533,6 +567,15 @@
> interrupts = <0x0 0x4f 0x4>;
> };
>
> + sdhci0: sdhci@1c000000 {
> + compatible = "arasan,sdhci-4.9a";
> + reg = <0x0 0x1c000000 0x0 0x100>;
> + interrupts = <0x0 0x49 0x4>;
> + dma-coherent;
> + clock-names = "clk_xin", "clk_ahb";
> + clocks = <&sdioclk 0>, <&ahbclk 0>;
> + };
> +
> phy1: phy@1f21a000 {
> compatible = "apm,xgene-phy";
> reg = <0x0 0x1f21a000 0x0 0x100>;
> --
> 1.8.2.1
>
>
Any comments on this patch ??
--
Thanks,
with regards,
Suman Tripathi
[-- Attachment #2: Type: text/html, Size: 5664 bytes --]
next prev parent reply other threads:[~2015-05-08 8:09 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-05-06 13:42 [PATCH v6 0/2] Add SDHCI support for APM X-Gene SoC using ARASAN SDHCI controller Suman Tripathi
2015-05-06 13:42 ` [PATCH v6 1/2] arm64: dts: Add the arasan sdhci nodes in apm-storm.dtsi Suman Tripathi
2015-05-08 8:09 ` Suman Tripathi [this message]
2015-05-06 13:42 ` [PATCH v6 2/2] mmc: sdhci: Add support to disable SDR104/SDR50/DDR50 based on capability register 0 Suman Tripathi
2015-05-08 8:10 ` Suman Tripathi
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=CAOHikRDMqKo+c8CSkxAGaP8jOqB0aw9yFXvqxz_j6Di_sLciLA@mail.gmail.com \
--to=stripathi@apm.com \
--cc=anton@enomsg.org \
--cc=arnd@arndb.de \
--cc=chris@printf.net \
--cc=ddutile@redhat.com \
--cc=devicetree@vger.kernel.org \
--cc=jcm@redhat.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-mmc@vger.kernel.org \
--cc=linuxppc-dev@lists.ozlabs.org \
--cc=michal.simek@xilinx.com \
--cc=mlangsdo@redhat.com \
--cc=patches@apm.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).