From: Ulf Hansson <ulf.hansson@linaro.org>
To: Joerg Roedel <joro@8bytes.org>
Cc: "linuxppc-dev@lists.ozlabs.org" <linuxppc-dev@lists.ozlabs.org>,
Yangbo Lu <yangbo.lu@nxp.com>,
iommu@lists.linux-foundation.org,
linux-mmc <linux-mmc@vger.kernel.org>,
scott.wood@nxp.com
Subject: Re: [v7, 4/5] powerpc/fsl: move mpc85xx.h to include/linux/fsl
Date: Tue, 5 Apr 2016 11:54:19 +0200 [thread overview]
Message-ID: <CAPDyKFrz-CbkTo+249vtibmzeTG17G3OXajawL3C_a8Cvp1SBg@mail.gmail.com> (raw)
In-Reply-To: <1459480051-3701-5-git-send-email-yangbo.lu@nxp.com>
- decreasing the cc list significantly
On 1 April 2016 at 05:07, Yangbo Lu <yangbo.lu@nxp.com> wrote:
> Move mpc85xx.h to include/linux/fsl and rename it to svr.h as
> a common header file. It has been used for mpc85xx and it will
> be used for ARM-based SoC as well.
>
> Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com>
> Acked-by: Wolfram Sang <wsa@the-dreams.de>
> ---
> Changes for v2:
> - None
> Changes for v3:
> - None
> Changes for v4:
> - None
> Changes for v5:
> - Changed to Move mpc85xx.h to include/linux/fsl/
> - Adjusted '#include <linux/fsl/svr.h>' position in file
> Changes for v6:
> - None
> Changes for v7:
> - Added 'Acked-by: Wolfram Sang' for I2C part
> - Also applied to arch/powerpc/kernel/cpu_setup_fsl_booke.S
> ---
> arch/powerpc/kernel/cpu_setup_fsl_booke.S | 2 +-
> drivers/clk/clk-qoriq.c | 3 +--
> drivers/i2c/busses/i2c-mpc.c | 2 +-
> drivers/iommu/fsl_pamu.c | 3 +--
Hi Joerg,
Could you have a look at the iommu parts here and provide your ack if
you like it.
I intend to queue this for 4.7 via my mmc tree, unless you see issues with that.
Kind regards
Uffe
> drivers/net/ethernet/freescale/gianfar.c | 2 +-
> arch/powerpc/include/asm/mpc85xx.h => include/linux/fsl/svr.h | 4 ++--
> 6 files changed, 7 insertions(+), 9 deletions(-)
> rename arch/powerpc/include/asm/mpc85xx.h => include/linux/fsl/svr.h (97%)
>
> diff --git a/arch/powerpc/kernel/cpu_setup_fsl_booke.S b/arch/powerpc/kernel/cpu_setup_fsl_booke.S
> index 462aed9..2b0284e 100644
> --- a/arch/powerpc/kernel/cpu_setup_fsl_booke.S
> +++ b/arch/powerpc/kernel/cpu_setup_fsl_booke.S
> @@ -13,13 +13,13 @@
> *
> */
>
> +#include <linux/fsl/svr.h>
> #include <asm/page.h>
> #include <asm/processor.h>
> #include <asm/cputable.h>
> #include <asm/ppc_asm.h>
> #include <asm/mmu-book3e.h>
> #include <asm/asm-offsets.h>
> -#include <asm/mpc85xx.h>
>
> _GLOBAL(__e500_icache_setup)
> mfspr r0, SPRN_L1CSR1
> diff --git a/drivers/clk/clk-qoriq.c b/drivers/clk/clk-qoriq.c
> index 7bc1c45..fc7f722 100644
> --- a/drivers/clk/clk-qoriq.c
> +++ b/drivers/clk/clk-qoriq.c
> @@ -13,6 +13,7 @@
> #include <linux/clk.h>
> #include <linux/clk-provider.h>
> #include <linux/fsl/guts.h>
> +#include <linux/fsl/svr.h>
> #include <linux/io.h>
> #include <linux/kernel.h>
> #include <linux/module.h>
> @@ -1148,8 +1149,6 @@ bad_args:
> }
>
> #ifdef CONFIG_PPC
> -#include <asm/mpc85xx.h>
> -
> static const u32 a4510_svrs[] __initconst = {
> (SVR_P2040 << 8) | 0x10, /* P2040 1.0 */
> (SVR_P2040 << 8) | 0x11, /* P2040 1.1 */
> diff --git a/drivers/i2c/busses/i2c-mpc.c b/drivers/i2c/busses/i2c-mpc.c
> index 48ecffe..600704c 100644
> --- a/drivers/i2c/busses/i2c-mpc.c
> +++ b/drivers/i2c/busses/i2c-mpc.c
> @@ -27,9 +27,9 @@
> #include <linux/i2c.h>
> #include <linux/interrupt.h>
> #include <linux/delay.h>
> +#include <linux/fsl/svr.h>
>
> #include <asm/mpc52xx.h>
> -#include <asm/mpc85xx.h>
> #include <sysdev/fsl_soc.h>
>
> #define DRV_NAME "mpc-i2c"
> diff --git a/drivers/iommu/fsl_pamu.c b/drivers/iommu/fsl_pamu.c
> index a34355f..af8fb27 100644
> --- a/drivers/iommu/fsl_pamu.c
> +++ b/drivers/iommu/fsl_pamu.c
> @@ -21,11 +21,10 @@
> #include "fsl_pamu.h"
>
> #include <linux/fsl/guts.h>
> +#include <linux/fsl/svr.h>
> #include <linux/interrupt.h>
> #include <linux/genalloc.h>
>
> -#include <asm/mpc85xx.h>
> -
> /* define indexes for each operation mapping scenario */
> #define OMI_QMAN 0x00
> #define OMI_FMAN 0x01
> diff --git a/drivers/net/ethernet/freescale/gianfar.c b/drivers/net/ethernet/freescale/gianfar.c
> index d2f917a..2224b10 100644
> --- a/drivers/net/ethernet/freescale/gianfar.c
> +++ b/drivers/net/ethernet/freescale/gianfar.c
> @@ -86,11 +86,11 @@
> #include <linux/udp.h>
> #include <linux/in.h>
> #include <linux/net_tstamp.h>
> +#include <linux/fsl/svr.h>
>
> #include <asm/io.h>
> #ifdef CONFIG_PPC
> #include <asm/reg.h>
> -#include <asm/mpc85xx.h>
> #endif
> #include <asm/irq.h>
> #include <asm/uaccess.h>
> diff --git a/arch/powerpc/include/asm/mpc85xx.h b/include/linux/fsl/svr.h
> similarity index 97%
> rename from arch/powerpc/include/asm/mpc85xx.h
> rename to include/linux/fsl/svr.h
> index 213f3a8..8d13836 100644
> --- a/arch/powerpc/include/asm/mpc85xx.h
> +++ b/include/linux/fsl/svr.h
> @@ -9,8 +9,8 @@
> * (at your option) any later version.
> */
>
> -#ifndef __ASM_PPC_MPC85XX_H
> -#define __ASM_PPC_MPC85XX_H
> +#ifndef FSL_SVR_H
> +#define FSL_SVR_H
>
> #define SVR_REV(svr) ((svr) & 0xFF) /* SOC design resision */
> #define SVR_MAJ(svr) (((svr) >> 4) & 0xF) /* Major revision field*/
> --
> 2.1.0.27.g96db324
>
next prev parent reply other threads:[~2016-04-05 9:54 UTC|newest]
Thread overview: 15+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-04-01 3:07 [v7, 0/5] Fix eSDHC host version register bug Yangbo Lu
2016-04-01 3:07 ` [v7, 1/5] ARM64: dts: ls2080a: add device configuration node Yangbo Lu
2016-04-01 3:07 ` [v7, 2/5] soc: fsl: add GUTS driver for QorIQ platforms Yangbo Lu
2016-04-01 3:07 ` [v7, 3/5] dt: move guts devicetree doc out of powerpc directory Yangbo Lu
2016-04-04 5:15 ` Rob Herring
2016-04-01 3:07 ` [v7, 4/5] powerpc/fsl: move mpc85xx.h to include/linux/fsl Yangbo Lu
2016-04-01 19:03 ` Stephen Boyd
2016-04-05 9:54 ` Ulf Hansson [this message]
2016-04-05 10:35 ` Joerg Roedel
2016-04-01 3:07 ` [v7, 5/5] mmc: sdhci-of-esdhc: fix host version for T4240-R1.0-R2.0 Yangbo Lu
2016-04-01 22:25 ` [v7, 0/5] Fix eSDHC host version register bug Scott Wood
2016-04-05 11:27 ` Ulf Hansson
2016-04-06 6:12 ` Yangbo Lu
2016-04-06 8:14 ` Ulf Hansson
2016-04-11 2:54 ` Yangbo Lu
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=CAPDyKFrz-CbkTo+249vtibmzeTG17G3OXajawL3C_a8Cvp1SBg@mail.gmail.com \
--to=ulf.hansson@linaro.org \
--cc=iommu@lists.linux-foundation.org \
--cc=joro@8bytes.org \
--cc=linux-mmc@vger.kernel.org \
--cc=linuxppc-dev@lists.ozlabs.org \
--cc=scott.wood@nxp.com \
--cc=yangbo.lu@nxp.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).