From mboxrd@z Thu Jan 1 00:00:00 1970 Message-ID: From: Steven Blakeslee To: "'t.vanremortel@ha.be'" , PPC Mailinglist Subject: RE: EP405 network interface Date: Thu, 26 Jun 2003 14:39:26 -0400 MIME-Version: 1.0 Content-Type: text/plain; charset="iso-8859-1" Sender: owner-linuxppc-embedded@lists.linuxppc.org List-Id: Did you enable the phy in the Board Control Status Register? -----Original Message----- From: Toni Van Remortel [mailto:t.vanremortel@ha.be] Sent: Thursday, June 26, 2003 10:01 AM To: PPC Mailinglist Subject: EP405 network interface Hi all, I cannot get the NIC working on my EP405. I used the ep405_config from the linuxppc_2_4_devel tree. This is a part of the output: ... loop: loaded (max 8 devices) eth0: No PHY device found. removing net dev ... So it seems that the kernel doesn't find the NIC (but it is there, and working, ep-bootloader can use it to download the image). Anybody an idea? I already checked the NIC support, and the onboard-IBM NIC support is enabled. Regards, -- Toni Van Remortel Wetenschappelijk Medewerker - D-science lab Tel: 03 205 61 72 - Fax: 03 205 61 95 E-mail: t.vanremortel@ha.be ** Sent via the linuxppc-embedded mail list. See http://lists.linuxppc.org/