From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Message-ID: From: Keith Outwater To: linuxppc-embedded@lists.linuxppc.org Subject: Recommendations for LXT971A PHY MII interrupt connection Date: Fri, 21 Dec 2001 08:45:00 -0800 MIME-Version: 1.0 Content-Type: text/plain Sender: owner-linuxppc-embedded@lists.linuxppc.org List-Id: Greetings all - I'm a hardware designer seeking to provide support on a custom MPC860T based design for linux. Does anyone have specific recommendations as to the best way to connect an Ethernet PHY's MII management I/F interrupt to the processor? I'm using an Intel LXT971A PHY. For example, are the general purpose external interrupts on IRQ[0:6] or the CPM interrupts on port C preferred? Is there a specific pin or interrupt that is preferred? Thanks! PS: (this is a bit off topic linux-wise, but related: Wolfgang, what's the preferred method as far a ppcboot is concerned?) Keith Outwater Sr. Electrical Engineer Microvision, Inc. ** Sent via the linuxppc-embedded mail list. See http://lists.linuxppc.org/